TP-Link 5.8GHz 867Mbps ഔട്ട്ഡോർ വയർലെസ് CPE ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

This manual provides essential information for the proper installation, configuration, and operation of your TP-Link 5.8GHz 867Mbps Outdoor Wireless CPE. This professional outdoor device is designed to provide high-performance, long-distance wireless transmission and coverage, adapting to various harsh outdoor environments. It is ideal for point-to-point, point-to-multipoint, and hotspot applications.

Note: The product is packaged in single piece. For optimal performance, especially for point-to-point connections, two units are recommended. The default product setting language is Chinese, but an English user manual is provided for configuration assistance.

2. പാക്കേജ് ഉള്ളടക്കം

ഉൽപ്പന്ന പാക്കേജിംഗ് തുറക്കുമ്പോൾ, നിങ്ങൾ ഇനിപ്പറയുന്ന ഇനങ്ങൾ കണ്ടെത്തണം:

• CPE Host (1 unit)
• PoE Injector / Power Adapter
• Bundling Wires (2 pieces)
• ഡിസി വൈദ്യുതി വിതരണം
• ദ്രുത ഇൻസ്റ്റലേഷൻ ഗൈഡ്

3. ശാരീരിക വിവരണം

3.1. പോർട്ടുകളും ബട്ടണുകളും

• മോഡ് സ്വിച്ച്: Used to switch the operating mode to AP (Access Point) or Client.
• പുനഃസജ്ജമാക്കുക/WPS ബട്ടൺ: In power-on state, press for 0-1 second to pair with other bridge equipment. Press for 3 seconds until the wireless signal intensity indicator light starts flashing to restore factory settings and restart automatically.
• LAN1 (LAN0/PoE) Port: RJ45 port for connecting to front-end devices such as IPC. This port also provides PoE input.
• LAN0 (LAN1) Port: RJ45 port for connecting to front-end devices such as IPC.
• പവർ പോർട്ട്: For direct DC power supply.

3.2. ഇൻഡിക്കേറ്റർ ലൈറ്റുകൾ

• AP മോഡ്: All signal indicator lights are always on.
• ക്ലയൻ്റ് മോഡ്: Indicates the intensity of the received wireless signal. More lights on signifies a stronger signal.
• AP/Client Matching: The signal indicator light flashes slowly in turn to indicate that matching is in progress. An overall flash indicates that matching fails.
• LAN Port (LAN0/LAN1): 'Always On' means the port is connected to a device but no data is transmitted. 'Flicker' means the port is connected and data is being sent and received.
• പവർ: Always On when the equipment is powered on and turned on normally.

4. ഇൻസ്റ്റലേഷൻ

4.1. Opening the Slide Cover

Before connecting network cables, you need to open the slide cover on the CPE shell. The cover is designed tightly to prevent it from falling off during outdoor operation. If it is difficult to open, refer to the following steps:

1. Insert a screwdriver into the gap between the CPE shell and the slide cover.
2. Press down the screwdriver to make the sliding cover slide forward under force.

4.2. ഉപകരണം മൌണ്ട് ചെയ്യുന്നു

The CPE is designed for pole-mounted installation. Use the provided nylon ribbons to fix the equipment on a pillar. Adjust the side of the equipment to face the desired wireless coverage area.

5. പ്രാരംഭ സജ്ജീകരണവും ജോടിയാക്കലും

This section guides you through the initial power-on and pairing process for your CPE devices. For point-to-point or point-to-multipoint setups, ensure the devices are within 10 meters during the initial pairing process.

5.1. One-to-One Bridge Setup

1. Set Main Bridge: Open the product cover of the first CPE and connect the power. Switch the mode switch to AP mode.
2. Set Client Bridge: Open the product cover of the second CPE and connect the power. Switch the mode switch to Client mode.
3. ജോടിയാക്കൽ ആരംഭിക്കുക: Press the RESET/WPS button on the main bridge. The indicator lights will start flashing, indicating it's ready to connect.
4. Connect Client: Press the RESET/WPS button on the client bridge. Wait for 5-10 seconds for the two bridges to automatically connect.
5. കണക്ഷൻ സ്ഥിരീകരിക്കുക: If the indicator lights on both bridges remain steadily on, the bridge-to-bridge connection is successful.

5.2. One-to-Many Bridge Setup (e.g., 1-to-3)

For a one-to-many setup, you will configure one main bridge (AP) and multiple client bridges. The process is similar to the one-to-one setup, repeated for each client.

1. Set Main Bridge: Open the product cover of the first CPE and connect the power. Switch the mode switch to AP mode.
2. Set First Client Bridge: Connect the second CPE to the client end and power it on. After the bridge starts normally, switch its mode to Client.
3. Pair First Client: Press the RESET/WPS button on the main bridge (AP). The indicator light starts flashing, ready to connect. Then, press the RESET/WPS button on the first client bridge. Wait for 5-10 seconds for automatic connection. Once connected, the indicator lights on both will remain on.
4. Set Subsequent Client Bridges: Repeat the process for the third and fourth bridges (or any additional clients). For each new client, switch it to Client mode, then press the RESET/WPS button on the main bridge (AP) and then on the new client bridge.
5. എല്ലാ കണക്ഷനുകളും പരിശോധിക്കുക: Ensure all client bridges show steady indicator lights, confirming successful connection to the main bridge.

6. ഓപ്പറേറ്റിംഗ് മോഡുകളും ആപ്ലിക്കേഷനുകളും

The TP-Link Outdoor Wireless CPE supports various operating modes to suit different networking needs.

6.1. Point-to-Point Connection

This mode is primarily used to establish a network connection between two remote wireless devices, such as connecting a computer to a network camera over a long distance.

6.2. Point-to-Multipoint Connection

This mode is used for wireless devices in several different areas to establish network connections with access points in a central area, often for distributed surveillance or network access.

6.3. Hotspot Applications

The CPE can provide network access for wireless clients such as smartphones, tablets, and laptops. If the front-end device of the wireless CPE is a router, it is recommended to configure the CPE to Access Point mode.

6.4. Remote Video Surveillance

The 5GHz 867Mbps outdoor wireless CPE can achieve long-distance video data transmission, enabling scattered video monitoring of different factory areas, multiple construction sites, docks, parks, and real-time viewing and centralized management in monitoring locations.

7. Web ഇൻ്റർഫേസ് ക്രമീകരണങ്ങൾ

The CPE can be configured via a web-based management interface. Connect your computer to the CPE's LAN port and access the device's IP address in a web browser (default IP is often 192.168.1.254 for AP mode, 192.168.1.252 for Client mode, as seen in diagrams).

7.1. ദ്രുത സജ്ജീകരണം

The Quick Setup wizard allows you to select the working mode policy. You can choose to follow the external physical mode switch or fix the device to Access Point or Client mode.

7.2. Wireless Basic Settings

Configure fundamental wireless parameters such as SSID, encryption, and channel settings.

• SSID: Network name (e.g., TP-LINK_5G_D69E).
• എൻക്രിപ്ഷൻ രീതി: No encryption, WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP).
• വയർലെസ് മോഡ്: 802.11a/n/ac mixed.
• ചാനൽ ബാൻഡ്‌വിഡ്ത്ത്: 80MHz/40MHz/20MHz Automatic.
• Channel/frequency: ഓട്ടോമാറ്റിക്.
• പവർ ട്രാൻസ്മിറ്റ്: Adjustable (e.g., 22 dBm).
• Maximum transmission rate: Eye movement (likely an auto-negotiation setting).
• Video transmission acceleration: ടോഗിൾ ഓൺ/ഓഫ്.
• Enable AP isolation: ടോഗിൾ ഓൺ/ഓഫ്.

7.3. Advanced Wireless Settings

For fine-tuning your wireless network, access advanced settings.

• ജോടിയാക്കൽ: Enable/Disable.
• Group Key Update Cycle: (e.g., 86400 seconds).
• ദൂര ക്രമീകരണം: Manual settings (0-17km).
• Beacon time slot: (40-1000).
• RTS threshold: (1-2346).
• Shard threshold: (256-2346).
• DTIM interval: (1-255).
• ഹ്രസ്വ ജി‌ഐ: ടോഗിൾ ഓൺ/ഓഫ്.
• Wi-Fi multimedia (WMM): ടോഗിൾ ഓൺ/ഓഫ്.

8 സ്പെസിഫിക്കേഷനുകൾ

9 ഉപയോക്തൃ നുറുങ്ങുകൾ

• Quantity for Point-to-Point: For a stable point-to-point connection, you will need two CPE devices. The product is sold individually, so ensure you purchase the correct quantity for your intended setup.
• ഭാഷാ ക്രമീകരണം: The default language for the product settings may be Chinese. If you encounter difficulties, refer to the provided English user manual for guidance on changing the interface language or configuring settings.
• പവർ അഡാപ്റ്റർ: The product includes a power adapter (PoE injector). Please select the appropriate plug type (US, EU, UK, AU) when purchasing, as different countries have different standards.
• ലാൻ കേബിൾ: A LAN cable is typically included for initial setup and connection to the PoE injector. The length may vary, but it is usually sufficient for connecting the CPE to the PoE injector.
• ട്രാൻസ്മിഷൻ ദൂരം: This CPE is designed for long-range transmission, capable of reaching up to 5 kilometers in non-interference environments. Optimal performance depends on clear line-of-sight and minimal environmental obstructions.

10. പ്രശ്‌നപരിഹാരം

If you encounter issues with your CPE, consider the following common troubleshooting steps:

• ശക്തിയില്ല: Ensure the power adapter is correctly connected and the power outlet is functional. Check the PWR indicator light.
• കണക്ഷൻ ഇല്ല/മോശം സിഗ്നൽ:
  • Verify that both CPEs are powered on and configured correctly (one AP, one or more Clients).
  • Ensure the mode switch is set appropriately for each device.
  • Check the indicator lights for pairing status. If flashing, re-attempt the pairing process.
  • Ensure clear line-of-sight between devices. Obstructions can severely degrade signal quality.
  • Adjust the physical alignment of the CPEs to optimize signal strength (monitor signal intensity lights).
  • For initial pairing, ensure devices are within 10 meters.
• ആക്‌സസ് ചെയ്യാൻ കഴിയില്ല Web ഇൻ്റർഫേസ്:
  • Verify your computer's IP address is in the same subnet as the CPE (e.g., if CPE is 192.168.1.254, set your computer to 192.168.1.x, where x is not 254).
  • Ensure the Ethernet cable is securely connected to the LAN port.
  • മറ്റൊന്ന് പരീക്ഷിക്കുക web ബ്രൗസർ.
  • If you've forgotten the password or made incorrect settings, perform a factory reset by pressing the RESET/WPS button for 3 seconds until the indicator lights flash.
• വേഗത കുറഞ്ഞ വേഗത:
  • മറ്റ് 5GHz ഉപകരണങ്ങളിൽ നിന്നുള്ള ഇടപെടലുകൾ പരിശോധിക്കുക.
  • Ensure the CPEs are properly aligned for optimal signal strength.
  • Review advanced wireless settings like channel bandwidth and distance settings.

11. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or further assistance, please refer to the official TP-Link website or contact your local TP-Link support team. Keep your purchase receipt for warranty claims.