Spanninga LED Bicycle Front Headlight

Spanninga LED Bicycle Front Headlight 6V-36V User Manual

Model: LED Bicycle Front Headlight

ആമുഖം

This manual provides instructions for the installation, operation, and maintenance of your Spanninga LED Bicycle Front Headlight. This headlight is designed to provide reliable illumination for your bicycle, operating within a wide voltag6V മുതൽ 36V DC വരെയുള്ള ഇ ശ്രേണി.

പാക്കേജ് ഉള്ളടക്കം

  • 1 x Spanninga LED Bicycle Front Headlight

The headlight comes with an integrated wiring harness for connection to your bicycle's power system.

ഫ്രണ്ട് view of the LED bicycle headlight with its attached wiring harness.

ചിത്രം 1: മുൻഭാഗം view of the Spanninga LED Bicycle Front Headlight with wiring.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

  1. ഹെഡ്ലൈറ്റ് സ്ഥാപിക്കൽ:

    Identify a suitable mounting location on the front of your bicycle, typically on the fork crown or handlebars. Use the integrated mounting bracket to securely attach the headlight. Ensure the light is positioned to illuminate the path ahead without obstructing your view or interfering with bicycle controls.

    വശം view of the LED bicycle headlight, showing its mounting bracket.

    ചിത്രം 2: വശം view showing the headlight's mounting bracket.

  2. ഇലക്ട്രിക്കൽ കണക്ഷൻ:

    The headlight operates on a DC voltage range of 6V to 36V. Connect the integrated wiring harness to your bicycle's power source (e.g., e-bike battery, dynamo). Pay close attention to polarity:

    • Connect the positive (+) wire from the headlight to the positive (+) terminal of your power source.
    • Connect the negative (-) wire from the headlight to the negative (-) terminal of your power source.

    CAUTION: Incorrect polarity or exceeding the specified voltage range (6V-36V DC) can damage the headlight.

    പിൻഭാഗം view of the LED bicycle headlight, showing the power input area with 'DC 6-36V' and polarity markings.

    ചിത്രം 3: പിൻഭാഗം view indicating DC 6-36V input and polarity markings.

  3. കേബിൾ മാനേജുമെന്റ്:

    Route the wiring safely along your bicycle frame, securing it with cable ties to prevent it from snagging on moving parts or getting damaged.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once properly installed and connected to a power source, the Spanninga LED Bicycle Front Headlight will typically activate when power is supplied to it. Depending on your bicycle's electrical system, this may be controlled by a switch on your handlebars or automatically with the bicycle's main power.

  • ഓൺ/ഓഫ് ചെയ്യുന്നു: Refer to your bicycle's specific instructions for how to control auxiliary lighting.
  • ബീം അഡ്ജസ്റ്റ്മെന്റ്: If your mounting allows, adjust the angle of the headlight to ensure optimal visibility without dazzling oncoming traffic.

മെയിൻ്റനൻസ്

  • വൃത്തിയാക്കൽ: ലെൻസ് പതിവായി സോഫ്റ്റ്, ഡി ക്ലീനർ ഉപയോഗിച്ച് വൃത്തിയാക്കുക.amp cloth to ensure maximum light output. Avoid abrasive cleaners that could scratch the lens.
  • കണക്ഷൻ പരിശോധന: Periodically inspect the electrical connections for corrosion or looseness. Ensure all wiring is securely fastened and free from damage.
  • മൗണ്ടിംഗ് സെക്യൂരിറ്റി: Check that the headlight remains securely mounted to your bicycle. Tighten any loose screws if necessary.

No user-serviceable parts are inside the headlight unit. Do not attempt to open or modify the casing, as this may void any potential warranty and could lead to damage.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നം സാധ്യമായ കാരണം പരിഹാരം
ഹെഡ്‌ലൈറ്റ് ഓണാകുന്നില്ല.
  • No power from source.
  • Loose or incorrect wiring connection.
  • തെറ്റായ വോളിയംtagഇ വിതരണം ചെയ്തു.
  • Check if your bicycle's power source is active.
  • Verify all wiring connections are secure and correctly polarized (+ to +, - to -).
  • Ensure the power source provides 6V-36V DC.
വെളിച്ചം മങ്ങുന്നു അല്ലെങ്കിൽ മിന്നിമറയുന്നു.
  • കുറഞ്ഞ വോളിയംtagവൈദ്യുതി ഉറവിടത്തിൽ നിന്ന് ഇ.
  • മോശം വൈദ്യുത ബന്ധം.
  • വൃത്തികെട്ട ലെൻസ്.
  • Check your power source's output voltage.
  • Inspect wiring for loose connections or corrosion.
  • Clean the headlight lens.

സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർ വിശദാംശങ്ങൾ
ഉൽപ്പന്നത്തിൻ്റെ പേര് Spanninga LED Bicycle Front Headlight
Model Identifier (visible on lens) TREK K316
വാല്യംtagഇ ഇൻപുട്ട് DC 6V-36V
സ്ഥാനം ഫ്രണ്ട്
മെറ്റീരിയൽ Aluminum alloy (assumed for casing)
പാക്കേജ് അളവുകൾ (L x W x H) 15 സെ.മീ x 6 സെ.മീ x 2 സെ.മീ
പാക്കേജ് ഭാരം 0.08 കി.ഗ്രാം

Note: Some product properties provided in the source data appear to be for a bicycle hub rather than the headlight. Specifications listed above are based on direct product information and visual cues.

ഉപയോക്തൃ ടിപ്പുകൾ

This section would typically include helpful advice and insights from other users. As no specific user reviews or Q&A were provided, we recommend checking online forums or product pages for community-contributed tips on optimizing your headlight's performance and longevity.

വാറൻ്റിയും പിന്തുണയും

വാറന്റി വിവരങ്ങൾക്കും സാങ്കേതിക പിന്തുണയ്ക്കും, ദയവായി റീട്ടെയിലറെയോ നിർമ്മാതാവിന്റെയോ ഉദ്യോഗസ്ഥനെയോ ബന്ധപ്പെടുക. website where you purchased this product. Keep your proof of purchase for any warranty claims.

അനുബന്ധ രേഖകൾ - LED Bicycle Front Headlight

പ്രീview AXENDO 40 DYNAMO Instruction Manual - Spanninga
Instruction manual for the Spanninga AXENDO 40 DYNAMO bicycle headlight, detailing installation, operation, and performance. Learn how to connect your dynamo-powered light for optimal visibility on your bike.
പ്രീview Spanninga Kendo Dynamo Bicycle Light Instruction Manual
Comprehensive instruction manual for the Spanninga Kendo Dynamo bicycle light (model CC01). Learn how to install and operate your dynamo-powered bike light for optimal road illumination.
പ്രീview Spanninga VENA EBIKE Instruction Manual
Instruction manual for the Spanninga VENA EBIKE light system, detailing electrical connections, mounting, and supported voltagഇ ഇൻപുട്ടുകൾ.
പ്രീview Spanninga Corona 20 E-Bike Instruction Manual
User manual for the Spanninga Corona 20 E-Bike, providing installation and operational guidance. Features include AC/DC power compatibility and model number CC01.
പ്രീview FLEXIO SPEED E-BIKE: Spanninga Rear Light Installation Manual
Official instruction manual for installing the Spanninga rear light and license plate light on the FLEXIO SPEED E-BIKE. Covers electrical specifications (6-36V DC) and mounting details (M5 x 12mm screws).
പ്രീview Kendo E-Bike Light Installation and Operation Manual
Comprehensive instruction manual for the Spanninga Kendo E-Bike light, covering front light mounting, rear light connection, and power specifications.