VEVOR PRO SPOT 2600 സ്പോട്ട് വെൽഡർ ഡെന്റ് പുള്ളർ മെഷീൻ ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

This manual provides comprehensive instructions for the safe and effective operation and maintenance of your VEVOR PRO SPOT 2600 Spot Welder Dent Puller Machine. Designed for professional car body repair, this machine is capable of repairing common dents and other metal deformations with precision and efficiency. Please read this manual thoroughly before use and keep it for future reference.

2 സുരക്ഷാ വിവരങ്ങൾ

WARNING: Improper use can lead to serious injury or death. Always follow safety guidelines.

• Always wear appropriate Personal Protective Equipment (PPE), including welding helmet, gloves, and protective clothing.
• Ensure the work area is well-ventilated to avoid inhaling fumes.
• വെൽഡിംഗ് ഏരിയയിൽ നിന്ന് തീപിടിക്കുന്ന വസ്തുക്കൾ സൂക്ഷിക്കുക.
• മെഷീൻ ശരിയായി നിലത്തുണ്ടെന്ന് ഉറപ്പാക്കുക.
• Do not operate the machine in wet conditions or with wet hands.
• ഏതെങ്കിലും അറ്റകുറ്റപ്പണികൾ നടത്തുന്നതിനോ ആക്‌സസറികൾ മാറ്റുന്നതിനോ മുമ്പ് വൈദ്യുതി വിച്ഛേദിക്കുക.
• കുട്ടികളെയും അനധികൃത വ്യക്തികളെയും പ്രവർത്തന മേഖലയിൽ നിന്ന് അകറ്റി നിർത്തുക.
• Check all cables and connections for damage before each use.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The VEVOR PRO SPOT 2600 is a versatile dent puller and spot welder. It features a robust design and intuitive controls for efficient operation.

Figure 1: VEVOR PRO SPOT 2600 Dent Puller Machine with included accessories.

3.1 നിയന്ത്രണ പാനൽ

ചിത്രം 2: വിശദമായി view നിയന്ത്രണ പാനലിന്റെ.

• Power Switch & Regulation Knob (6): Controls the machine's power and adjusts welding intensity.
• Manual/Automatic Switch (7): Toggles between manual and automatic welding modes.
• Power Indicator (9): Illuminates when the machine is powered on.
• Error Indicator (8): Illuminates to indicate a fault or error condition.
• Tool Select (Icons 1-5): Allows selection of different welding modes:
  • 1. Triangular Meson Pull: For pulling dents using triangular washers.
  • 2. Round Meson Pull: For pulling dents using round washers.
  • 3. OT Meson Pull: For pulling dents using OT washers.
  • 4. Wave Line Welding: For welding wavy wires for larger dent areas.
  • 5. Carbon Rod to Close the Fire (Carbon Rod Heating): For heating and shrinking metal using a carbon rod.

3.2 Welding Guns and Accessories

The machine comes with two welding guns to reduce switching time and improve efficiency.

Figure 3: Dual guns interface with attachments for different welding and pulling tasks.

The comprehensive accessory kit includes:

Figure 4: Standard accessory configuration.

• Dent Puller (Slide Hammer)
• കണക്റ്റർ
• Manual Suction Cup
• കാർബൺ തണ്ടുകൾ
• Wavy Lines
• Draw Hook
• റെഞ്ച്
• Six-Claw Hook
• Carbon Rod Chuck
• Round Meson Washers
• Meson Chuck
• Triangular Meson Washers
• Spot Welding Head
• OT Meson Washers

4. സജ്ജീകരണം

1. അൺപാക്കിംഗും പരിശോധനയും: Carefully unpack all components. Inspect the machine and accessories for any signs of damage during transit. Report any damage to the supplier immediately.
2. പ്ലേസ്മെൻ്റ്: നന്നായി വായുസഞ്ചാരമുള്ള സ്ഥലത്ത്, സ്ഥിരതയുള്ളതും നിരപ്പായതുമായ ഒരു പ്രതലത്തിൽ മെഷീൻ സ്ഥാപിക്കുക.
3. പവർ കണക്ഷൻ: Ensure the machine is connected to a power supply matching the specified voltage (220V or 110V, depending on your model). The machine requires a 16A fuse.
4. Connecting Welding Guns: Attach the desired welding gun to the machine's output port. Ensure a secure connection.
5. ഗ്രൗണ്ടിംഗ്: ഗ്രൗണ്ട് cl കണക്ട് ചെയ്യുകamp securely to a clean, bare metal part of the vehicle or workpiece, close to the repair area.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Before operating, ensure all safety precautions are observed.

5.1 പവറിംഗ് ഓണും മോഡ് തിരഞ്ഞെടുപ്പും

1. Turn the Power Switch & Regulation knob (6) to the 'ON' position. The Power Indicator (9) should illuminate.
2. Select the desired welding mode using the Tool Select icons (1-5) on the control panel.
3. Choose between 'Manual' or 'Automatic' operation using the Manual/Automatic Switch (7).
4. Adjust the welding power using the Power Switch & Regulation knob (6) according to the thickness and type of metal being worked on.

5.2 Dent Pulling Operation

For dent pulling, attach the appropriate pulling accessory (e.g., triangular meson, round meson, OT meson, wavy line) to the welding gun. For larger dents, the slide hammer (dent puller) can be used in conjunction with these accessories.

1. Clean the dented area thoroughly.
2. Select the appropriate meson or wavy line for the dent size and shape.
3. Attach the chosen accessory to the welding gun.
4. Place the accessory firmly against the dented metal surface.
5. Initiate the weld (either manually or automatically, depending on the switch setting). The machine creates small, strong welding spots.
6. Once welded, attach the slide hammer or draw hook to the accessory.
7. Gently pull the dent outwards. Repeat as necessary, moving across the dented area.

Figure 5: Small-scale spot welding for dent repair, ensuring high strength with minimal impact.

Figure 6: The PRO SPOT 2600 produces small welding spots, preventing burn-through and corrosion.

5.3 Carbon Rod Heating Operation

For shrinking stretched metal or minor surface imperfections, use the carbon rod heating function.

1. Attach the carbon rod chuck and a carbon rod to the welding gun.
2. Select the 'Carbon Rod to Close the Fire' mode.
3. Lightly touch the carbon rod to the metal surface in the area to be shrunk.
4. Observe the metal for a slight glow. Do not overheat.
5. Allow the metal to cool naturally or use a damp cloth to cool it, which helps in shrinking.

5.4 പൊതുവായ ഉപയോഗ നുറുങ്ങുകൾ

• Always ensure the metal surface is clean and free of paint, rust, or grease for optimal welding results.
• Practice on scrap metal before working on the actual vehicle to get a feel for the machine's settings and operation.
• The single-side welding thickness range is 0.6 - 1.2 mm. Adjust power accordingly.
• For best results, work systematically across the dent, pulling in small increments.

6. പരിപാലനം

Regular maintenance ensures the longevity and optimal performance of your VEVOR PRO SPOT 2600.

• വൃത്തിയാക്കൽ: After each use, clean the machine and accessories. Wipe down the main unit with a dry cloth. Remove any welding spatter from the guns and chucks.
• കേബിൾ പരിശോധന: Regularly inspect all cables, hoses, and connections for cuts, abrasions, or loose fittings. Replace damaged components immediately.
• തണുപ്പിക്കൽ സംവിധാനം: The machine features an efficient cooling system with side vents. Ensure these vents are clear of obstructions to allow for proper heat dissipation.


Figure 7: Side vents for fast heat radiation, crucial for continuous operation.

• സംഭരണം: Store the machine and accessories in a dry, clean environment, preferably in the provided compact toolbox, when not in use.

7. പ്രശ്‌നപരിഹാരം

നിങ്ങൾക്ക് പ്രശ്നങ്ങൾ നേരിടുകയാണെങ്കിൽ, ഇനിപ്പറയുന്ന പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും പരിശോധിക്കുക:

• മെഷീൻ പവർ ഓൺ ചെയ്യുന്നില്ല:
  • പവർ കേബിൾ കണക്ഷൻ പരിശോധിക്കുക.
  • പവർ സ്വിച്ച് 'ഓൺ' സ്ഥാനത്താണെന്ന് ഉറപ്പാക്കുക.
  • വൈദ്യുതി വിതരണം വോളിയം പരിശോധിക്കുകtage matches the machine's requirements (220V/110V).
  • Check the main fuse (16A).
• No welding output:
  • ഗ്രൗണ്ട് cl ഉറപ്പാക്കുകamp is securely attached to a clean metal surface.
  • Check for loose connections on the welding gun.
  • Verify the correct welding mode is selected.
  • Adjust welding power settings.
• Poor welding quality (weak or inconsistent welds):
  • Ensure the workpiece surface is clean and free of contaminants.
  • Adjust welding power.
  • Check the condition of the welding tips/accessories; replace if worn.
• Error Indicator (8) is illuminated:
  • This typically indicates an internal fault or overheating. Turn off the machine, disconnect power, and allow it to cool down. If the error persists, contact VEVOR support.
• Machine overheats:
  • Ensure cooling vents are clear.
  • Reduce continuous operating time.
  • Allow the machine to cool down before resuming operation.

8 സ്പെസിഫിക്കേഷനുകൾ

Figure 8: Key product specifications and typical applications.

9 ഉപയോക്തൃ നുറുങ്ങുകൾ

• വാല്യംtagഇ പരിശോധിക്കുക: Always confirm the machine's voltage requirement (220V/110V) matches your power supply before plugging it in.
• ഉപരിതല തയ്യാറാക്കൽ: For optimal results, ensure the metal surface is thoroughly cleaned of paint, rust, and any other contaminants before welding or heating.
• ആക്സസറി തിരഞ്ഞെടുക്കൽ: Choose the correct meson or pulling accessory based on the size and type of dent you are repairing. Using the right tool for the job improves efficiency and results.
• പരിശീലനം പൂർണതയിലെത്തിക്കുന്നു: If you are new to dent pulling or spot welding, practice on a piece of scrap metal first to familiarize yourself with the machine's operation and settings.

10. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or service inquiries, please contact VEVOR customer service through the official channels. Keep your purchase receipt as proof of purchase.