DOORHAN dh4 ഗാരേജ് ഡോർ റിമോട്ട് കൺട്രോൾ യൂസർ മാനുവൽ

1. ആമുഖം

This manual provides instructions for the setup, operation, and maintenance of your DOORHAN dh4 wireless remote control. This device is designed for controlling remote-controlled equipment such as rolling shutter doors and garage doors within an effective range of 50m-100m (in open space). It utilizes 433MHz rolling code technology for enhanced security and convenience.

IMPORTANT NOTE: This remote control cannot be cloned. Direct access to your receiver/opener is required for programming. Please ensure you have access to your receiver before attempting to program the remote.

Disclaimer: Your remote control must be consistent with the images and descriptions provided, and the brand and model must be on the compatibility list. The manufacturer is not responsible for purchase errors due to incompatibility.

2. ഉൽപ്പന്ന സവിശേഷതകൾ

This remote control is a new model for 2022, designed for compatibility with all DOORHAN models, including TRANSMITTER 2, TRANSMITTER 4, TRANSMITTER -2 PRO, TRANSMITTER -4 PRO, and Premium RC black 4.

3. സജ്ജീകരണവും പ്രോഗ്രാമിംഗും

To program your DOORHAN dh4 remote control, you must have direct access to the receiver unit of your garage door opener or rolling gate system. The programming process involves matching the remote with the receiver.

3.1 പ്രോഗ്രാമിംഗ് ഘട്ടങ്ങൾ

1. റിസീവറെ ആക്‌സസ് ചെയ്യുക: Locate the receiver unit for your garage door or rolling gate. This unit typically has a programming button.
2. Activate Receiver Programming Mode: Press and hold the programming button on the receiver. The receiver's indicator light should turn on or flash, indicating it's in programming mode.
3. Match Remote Control Button: While the receiver is in programming mode, press the desired button on your new DOORHAN dh4 remote control once and then release it.
4. ജോടിയാക്കൽ സ്ഥിരീകരിക്കുക: Press the same button on the remote control again. The receiver's light should flash continuously, and a sound will typically confirm successful matching.
5. ടെസ്റ്റ് ഓപ്പറേഷൻ: After successful pairing, test the remote control to ensure it operates your garage door or gate correctly.

The remote control operations for all DOORHAN models are generally the same. For a visual guide, please refer to the instructional video below:

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once programmed, operating your DOORHAN dh4 remote control is straightforward:

• തുറക്കുക അടക്കുക: Press the programmed button on the remote control to open or close your garage door or rolling gate.
• Stop (if applicable): Some systems allow a second press of the button during operation to stop the door/gate mid-movement. Refer to your receiver's manual for specific functionality.

5. പരിപാലനം

5.1 ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

The DOORHAN dh4 remote control uses a built-in 2032 battery. When the remote's range decreases or the LED indicator becomes dim, it's time to replace the battery.

1. സി തുറക്കുകasing: റിമോട്ട് കൺട്രോൾ ശ്രദ്ധാപൂർവ്വം തുറക്കുക casing. You may need a small screwdriver or a thin tool to pry it open.
2. പഴയ ബാറ്ററി നീക്കം ചെയ്യുക: Remove the old 2032 coin cell battery.
3. പുതിയ ബാറ്ററി ഇടുക: Insert a new 2032 battery, ensuring the correct polarity (+ side up).
4. അടയ്ക്കുക സിasing: റിമോട്ട് കൺട്രോൾ സി സ്നാപ്പ് ചെയ്യുകasing സുരക്ഷിതമായി തിരികെ ഒരുമിച്ച് ചേർക്കുക.

5.2 വൃത്തിയാക്കൽ

മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിച്ച് റിമോട്ട് കൺട്രോൾ തുടയ്ക്കുക. അബ്രാസീവ് ക്ലീനറുകൾ ഉപയോഗിക്കരുത് അല്ലെങ്കിൽ റിമോട്ട് വെള്ളത്തിൽ മുക്കരുത്.

6. പ്രശ്‌നപരിഹാരം

• പ്രോഗ്രാമിംഗിന് ശേഷം റിമോട്ട് പ്രവർത്തിക്കുന്നില്ല:
  • Ensure the receiver is functioning correctly.
  • Re-attempt the programming steps carefully, ensuring the receiver enters programming mode and the remote button is pressed correctly.
  • റിമോട്ടിന്റെ ബാറ്ററി പരിശോധിക്കുക.
• Remote has reduced range:
  • റിമോട്ട് കൺട്രോളിന്റെ ബാറ്ററി മാറ്റിസ്ഥാപിക്കുക.
  • Ensure there are no new sources of interference (e.g., new wireless devices) near the receiver or remote.
• Remote cannot be cloned:

  This remote uses rolling code technology, which prevents direct cloning from another remote for security reasons. It must be programmed directly to your receiver unit as described in the "Setup and Programming" section.
• Distinguishing an Original from a Fake:

  To ensure you have an authentic DOORHAN remote, observe the following characteristics:

  

  • Body Shape: The body of a fake remote may be narrower than the original.
  • ബട്ടൺ ഡിസൈൻ: Original remotes typically have recessed buttons to prevent accidental pressing.

7 ഉപയോക്തൃ നുറുങ്ങുകൾ

• Receiver Access is Key: Always ensure you have physical access to your garage door or gate receiver for programming. Without it, you cannot pair a new remote.
• അനുയോജ്യത പരിശോധിക്കുക: വാങ്ങുന്നതിന് മുമ്പ്asing, verify that your existing receiver is compatible with DOORHAN 433MHz rolling code remotes. If unsure, contact customer service.
• New Model Features: The 2022 model features a built-in 2032 battery and a blu-ray LED indicator for clear feedback.
• മെച്ചപ്പെടുത്തിയ സുരക്ഷ: The rolling code program provides increased security by changing the code each time the remote is used, making it difficult for unauthorized duplication.

8. വാറൻ്റിയും പിന്തുണയും

Specific warranty details for this product are not provided in the available information. For any issues, technical support, or warranty inquiries, please contact the seller or manufacturer directly.

Ensure you retain your proof of purchase for any support claims.