1. ആമുഖം
This manual provides essential information for the safe and effective use of your RadioMaster 6200mAh 2S LiPo Transmitter Battery. This high-capacity LiPo battery is designed to provide extended operation for compatible RadioMaster transmitters, including the TX16S, TX16S MKII, and Boxer models, offering up to 20 hours of duration.
2. പ്രധാനപ്പെട്ട സുരക്ഷാ മുന്നറിയിപ്പുകൾ
Lithium Polymer (LiPo) batteries require careful handling. Failure to follow these safety instructions can result in fire, personal injury, and property damage.
- Do not charge battery unattended: Always monitor the battery during charging.
- Always charge battery away from flammable objects: Ensure a safe charging environment.
- Do not disassemble or modify this battery: Tampering with the battery can be dangerous.
- Only use correct charging devices: Use a LiPo-compatible charger with appropriate settings.
- Max Charging Current 2.0A: Do not exceed this charging current.
- Do not puncture, drop, short-circuit, or expose the battery to extreme temperatures.
- If the battery swells, leaks, or shows any signs of damage, discontinue use immediately and dispose of it safely.
3 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ഇനം | 2S 7.4V 6200mAh LiPo Battery |
| നാമമാത്ര വോളിയംtage | 7.4V |
| ശേഷി | 6200mAh |
| വാട്ട് അവേഴ്സ് | 45.88Wh |
| കണക്ടറുകൾ | JST-XH and XT30 |
| പരമാവധി ചാർജ് കറൻ്റ് | 2A |
| അളവുകൾ (L x W x H) | 85mm x 50mm x 21mm |
| ഭാരം | 203 ഗ്രാം |
| അനുയോജ്യത | RadioMaster Boxer, TX16S, TX16S MKII series transmitters |
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
This battery is designed for direct installation into compatible RadioMaster transmitters. Ensure your transmitter is powered off before proceeding.
- ബാറ്ററി കമ്പാർട്ട്മെന്റ് കണ്ടെത്തുക: Refer to your transmitter's user manual to locate and open the battery compartment.
- ബാറ്ററി ബന്ധിപ്പിക്കുക: Carefully connect the XT30 main power connector from the battery to the corresponding port in your transmitter. The JST-XH balance lead is typically used for charging and balancing, and may also connect to an internal balance port if available in your transmitter.
- സുരക്ഷിത ബാറ്ററി: Place the battery securely within the compartment, ensuring no wires are pinched.
- കമ്പാർട്ട്മെന്റ് അടയ്ക്കുക: ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ അടയ്ക്കുക.
5. ഓപ്പറേഷൻ
Once installed, the battery powers your RadioMaster transmitter. Turn on your transmitter as per its specific instructions. The 6200mAh capacity provides extended usage times, up to 20 hours, depending on your transmitter model and usage patterns.
Monitor your transmitter's battery voltage display regularly to ensure the battery does not discharge below its safe operating voltage (typically 3.3V per cell for LiPo, or 6.6V for a 2S battery). Over-discharging can permanently damage the battery.
6. ചാർജിംഗ് നിർദ്ദേശങ്ങൾ
Always follow the safety warnings in Section 2 when charging your LiPo battery.
- Use a LiPo Charger: Connect the battery to a dedicated LiPo balance charger. Use both the XT30 main power connector and the JST-XH balance lead for safe and balanced charging.
- Set Charger Parameters: Configure your charger for a 2S (7.4V) LiPo battery. Set the charging current to a maximum of 2.0A. Charging at a lower current (e.g., 1A or 0.5A) is generally safer and can extend battery life.
- മോണിറ്റർ ചാർജിംഗ്: Never leave the battery unattended while charging. Place it on a non-flammable surface, away from combustible materials.
- ചാർജ് ചെയ്തതിനുശേഷം വിച്ഛേദിക്കുക: Once charging is complete, disconnect the battery from the charger. Do not leave it connected indefinitely.
7. പരിപാലനവും സംഭരണവും
- സംഭരണ വോളിയംtage: For long-term storage, charge or discharge the battery to its storage voltage (typically 3.8V per cell, or 7.6V for a 2S battery). Most modern LiPo chargers have a 'Storage' mode.
- താപനില: ബാറ്ററി തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത് സൂക്ഷിക്കുക, നേരിട്ടുള്ള സൂര്യപ്രകാശവും ഉയർന്ന താപനിലയും ഏൽക്കാത്ത സ്ഥലത്ത് സൂക്ഷിക്കുക.
- ശാരീരിക പരിശോധന: Regularly inspect the battery for any signs of damage, swelling, or leaks. Discontinue use and dispose of damaged batteries safely.
- നീക്കം ചെയ്യൽ: Dispose of LiPo batteries responsibly according to local regulations. Never throw them in household waste.
8. പ്രശ്നപരിഹാരം
- ബാറ്ററി ചാർജുചെയ്യുന്നില്ല: Ensure all connectors (XT30 and JST-XH) are securely plugged into the charger and battery. Verify charger settings are correct for a 2S LiPo battery. Check for any visible damage to the battery or cables.
- Short Run Time: If the battery's run time is significantly shorter than expected, it may be due to aging, damage, or improper charging/storage. Ensure you are not over-discharging the battery during use.
- Battery Swelling: If the battery appears swollen, immediately discontinue use and safely dispose of it. Swelling indicates internal damage and a potential fire hazard.
- ട്രാൻസ്മിറ്റർ ഓണാക്കുന്നില്ല: Check that the battery is fully charged and correctly installed in the transmitter. Ensure the XT30 connector is firmly seated.
9 ഉപയോക്തൃ നുറുങ്ങുകൾ
re-യിൽ നിന്ന് പ്രത്യേക ഉപയോക്തൃ നുറുങ്ങുകളൊന്നുമില്ല.views or Q&A are available at this time. Always prioritize safety and follow the manufacturer's guidelines for your transmitter and battery.
10. വാറൻ്റിയും പിന്തുണയും
For warranty information and technical support, please refer to the official RadioMaster webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ നിങ്ങളുടെ അംഗീകൃത ഡീലറെ ബന്ധപ്പെടുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.
