ആമുഖം
This manual provides essential instructions for the installation, operation, and maintenance of your replacement 2-in-1 HEPA and Carbon Filter, compatible with Rowenta Pure Air air purifier models PU3030, PU3030F0, and PU3030U0 (Filter model XD6231U0/XD6231). Please read this manual thoroughly before replacing your filter to ensure proper function and optimal air purification.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The 2-in-1 filter combines a True HEPA filter and an Activated Carbon filter to provide comprehensive air purification. This composite design efficiently targets various airborne pollutants.
- HEPA ഫിൽട്ടർ: Effectively captures up to 99.97% of airborne particles, including pollen, dust mites, mold spores, and other allergens.
- സജീവമാക്കിയ കാർബൺ ഫിൽട്ടർ: Designed to remove odors, smoke, volatile organic compounds (VOCs), and other gaseous particles from the air.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps to correctly install your new replacement filter:
- Prepare the Air Purifier: Ensure your Rowenta Pure Air air purifier is turned off and unplugged from the power outlet before beginning the filter replacement process.
- ഫിൽട്ടർ കമ്പാർട്ട്മെന്റ് ആക്സസ് ചെയ്യുക: Refer to your air purifier's original manual for specific instructions on how to open the filter compartment. This usually involves removing a back or front panel.
- പഴയ ഫിൽറ്റർ നീക്കം ചെയ്യുക: Carefully remove the used filter. It may be dusty, so handle it over a trash can.
- പുതിയ ഫിൽട്ടർ അൺപാക്ക് ചെയ്യുക: Remove the new 2-in-1 HEPA and Carbon Filter from its protective packaging.
- Identify Filter Orientation: The filter has a distinct front (HEPA side, typically white and pleated) and back (Activated Carbon side, typically black and honeycomb-like). Ensure you orient the filter correctly according to your air purifier's design. The image below shows the typical appearance.
- പുതിയ ഫിൽറ്റർ ചേർക്കുക: Gently slide the new filter into the compartment. Make sure it fits snugly and securely.
- കമ്പാർട്ട്മെന്റ് അടയ്ക്കുക: Close the filter compartment door or panel securely.
- Reset Filter Indicator (if applicable): Plug in your air purifier and turn it on. If your model has a filter replacement indicator, follow its instructions to reset it.
പ്രവർത്തന തത്വങ്ങൾ
Once installed, the filter works in conjunction with your air purifier to clean the air. Air is drawn into the purifier, passes through the multi-layer filtration system, and then clean air is released back into the room.
- The HEPA layer captures fine particulate matter.
- The Activated Carbon layer adsorbs gases and odors.
മെയിൻ്റനൻസ്
To maintain optimal performance of your air purifier and ensure continuous clean air, regular filter replacement is crucial.
- മാറ്റിസ്ഥാപിക്കൽ ആവൃത്തി: The filter needs to be replaced every 3-6 months. This timeframe can vary depending on air quality, usage frequency, and the presence of pets or smokers in the environment.
- കഴുകരുത്: This filter is not washable. Attempting to wash the HEPA or carbon components will damage them and reduce their effectiveness.
- നീക്കം ചെയ്യൽ: Dispose of the old filter with regular household waste.
ട്രബിൾഷൂട്ടിംഗ്
ഫിൽട്ടർ മാറ്റിസ്ഥാപിച്ചതിന് ശേഷം നിങ്ങൾക്ക് പ്രശ്നങ്ങൾ അനുഭവപ്പെടുകയാണെങ്കിൽ, ഇനിപ്പറയുന്നവ പരിഗണിക്കുക:
- കുറഞ്ഞ വായുപ്രവാഹം: Ensure the filter is installed correctly and not obstructed. Check if the air purifier's intake and output vents are clear.
- സ്ഥിരമായ ദുർഗന്ധം: If odors persist shortly after replacement, verify the filter's orientation. If the filter has been in use for an extended period beyond the recommended 3-6 months, its carbon layer may be saturated, requiring a new replacement.
- ഫിൽട്ടർ ഇൻഡിക്കേറ്റർ ലൈറ്റ് ഓണായി തുടരുന്നു: Consult your air purifier's original manual for instructions on how to reset the filter replacement indicator for your specific model.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിവരണം |
|---|---|
| ടൈപ്പ് ചെയ്യുക | Air Purifier Parts (Composite Filter) |
| അനുയോജ്യമായ മോഡലുകൾ | Rowenta Pure Air PU3030, PU3030F0, PU3030U0 |
| മോഡൽ നമ്പർ ഫിൽട്ടർ ചെയ്യുക | XD6231U0 (XD6231) |
| പ്രവർത്തനം 1 | HEPA Filter (captures up to 99.97% of airborne particles) |
| പ്രവർത്തനം 2 | Activated Carbon Filter (removes odors, smoke, VOCs) |
| HEPA Material | Electrostatic electret melt-blown material; high air permeability, low wind resistance, efficient pollutant capture. |
| Activated Carbon Material | High-quality modified activated carbon particles; developed pores, wide area, strong adsorption capacity for formaldehyde, benzene, TVOC, and odors. |
| ഉത്ഭവം | മെയിൻലാൻഡ് ചൈന |
| ഉയർന്ന തലത്തിലുള്ള രാസവസ്തുക്കൾ | ഒന്നുമില്ല |
വാറൻ്റിയും പിന്തുണയും
For any questions or assistance regarding this replacement filter, please contact the seller or manufacturer's customer support. They will provide the best solution for any issues you may encounter.
ഉപയോക്തൃ ടിപ്പുകൾ
- പതിവ് പരിശോധനകൾ: Periodically check the filter for visible dust and debris, especially if you live in an area with high pollution or have pets. While not washable, a visual check can help you anticipate replacement needs.
- ഒപ്റ്റിമൽ പ്രകടനം: Adhering to the 3-6 month replacement schedule is key to maintaining the air purifier's efficiency and ensuring healthy indoor air quality.
