സൈക്പ്ലസ് M1

CYCPLUS M1 GPS സൈക്കിൾ കമ്പ്യൂട്ടർ ഉപയോക്തൃ മാനുവൽ

മോഡൽ: M1

1. ആമുഖം

The CYCPLUS M1 is a smart GPS bicycle computer designed to track and analyze your cycling data. It features a large display, multiple sensor compatibility, and app synchronization for comprehensive ride analysis.

പ്രധാന സവിശേഷതകൾ:

  • 2.9-inch LCD screen with automatic backlight.
  • Switzerland Ublox chip for faster positioning and accurate track record.
  • ANT+ and Bluetooth 5.0 connectivity for external sensors and app synchronization.
  • Real-time data display: max/current/average speed, cadence, heart rate, power, gradient; Time, distance, ascent, ODO, altitude, temperature.
  • Support app data analysis and sync to Strava.
  • 1200mAh rechargeable battery, 30+ hours super long endurance, Type-C charging port.
  • Built-in barometer and thermometer.
  • IPX6 waterproof rating (Rain-proof, not soakable).
  • 16MB internal memory, storing about 150 hours of cycling data.
  • Supports automatic power-off and auto-pause.

പാക്കേജ് ഉള്ളടക്കം:

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

  • ജിപിഎസ് ബൈക്ക് കമ്പ്യൂട്ടർ (എം1)
  • Silicone Protector Case
  • ബൈക്ക് കമ്പ്യൂട്ടർ മൗണ്ട്
  • റബ്ബർ പാഡ്
  • റബ്ബർ ബാൻഡ് x 3
  • ടൈപ്പ്-സി ചാർജിംഗ് കേബിൾ
  • നിർദ്ദേശ മാനുവൽ (ഈ പ്രമാണം)
CYCPLUS M1 പാക്കേജ് ഉള്ളടക്കങ്ങൾ
Image: Package contents including the M1 bike computer, silicone case, mount, rubber bands, and charging cable.

2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

ഉപകരണം ചാർജിംഗ്:

Before first use, fully charge the device using the provided Type-C charging cable. The charging time is approximately 3.5 hours.

മൌണ്ട് ഇൻസ്റ്റലേഷൻ:

The CYCPLUS M1 can be installed on your bicycle handlebars using the included bike computer mount and rubber bands. Ensure the mount is securely fixed and does not obstruct your view or bike controls.

  1. Select a suitable location on your handlebar that does not interfere with safe riding.
  2. Place the rubber pad on the handlebar to prevent slipping and protect the surface.
  3. Position the bike computer mount over the rubber pad.
  4. Use the rubber bands to cross-fix the mount to the handlebar. Ensure the mount is stable.
  5. Align the convex part on the back of the M1 computer with the mount's slot and rotate clockwise until it clicks into place.
CYCPLUS M1 Mount Installation Diagram
Image: Diagram showing how to install the bike computer mount on the handlebar using rubber bands.

Note: The mount holder Z1 is designed for 31.8mm handlebars. If you have a different handlebar size, you may need to purchase a compatible mount separately.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

ബട്ടൺ പ്രവർത്തനങ്ങൾ:

CYCPLUS M1 Button Functions
Image: Diagram illustrating the functions of the three buttons on the CYCPLUS M1.
  • Left Button (►II):
    • Short Press (off state): Turn on.
    • Short Press (on state): Start/Pause recording.
    • Long Press: Turn off.
  • Middle Button (Clock Icon):
    • Short Press: Count Lap.
    • Long Press: Save record data.
  • Right Button (Refresh Icon):
    • Short Press: Go to next page (switch display content).
    • Long Press: Enter/Quit settings.

ദ്രുത ആരംഭ ഗൈഡ്:

  1. പവർ ഓൺ: Press the left button (►II) to turn on the device.
  2. GPS Signal Acquisition: After turning on, the device will search for GPS signals. This may take a few minutes. Ensure the device is in an open, barrier-free area. The GPS icon will appear when the device is ready.
  3. റെക്കോർഡിംഗ് ആരംഭിക്കുക: Press the left button (►II) again to start recording. The play icon (►) will appear, indicating recording has started.
  4. റെക്കോർഡിംഗ് സംരക്ഷിക്കുക: After your ride, long press the middle button (Clock Icon) to save the recording data. The play icon (►) will disappear.
  5. പവർ ഓഫ്: Long press the left button (►II) to turn off the device.

ക്രമീകരണ മെനു:

To enter the settings menu, long press the right button (Refresh Icon). You can navigate through 8 setting pages by short pressing the right button. Long press the right button again to return to the home page after finishing settings.

CYCPLUS M1 Settings Menu Navigation
Image: Visual guide to navigating the settings menu (C2-C9) on the CYCPLUS M1.

ANT+ Sensor Connection (C2):

  • Press the left button to start searching for ANT+ sensors.
  • Data will appear on the screen when a sensor is connected.
  • To unpair sensors: Switch to C9 page, then press the left button to unpair all paired sensors.
CYCPLUS M1 ANT+ Sensor Connection
Image: Steps for connecting ANT+ sensors and unpairing them.

Wheel Circumference Setting (C3):

  • Press the left button to start setting.
  • Press the right button to modify the flashing digit.
  • Press the middle button to switch between digits.
  • Press the left button to finish setting.

Refer to the "Tire Circumference Chart" in the Specifications section for common wheel circumference values.

Time Zone Setting (C4):

  • Press the left button to start setting.
  • Press the right button to modify the time zone.
  • Press the left button to finish setting.

Speed Unit Setting (C5):

  • Press the left button to start setting.
  • Press the right button to switch between KMH and MPH.
  • Press the left button to finish setting.

Temperature Unit Setting (C6):

  • Press the left button to start setting.
  • Press the right button to switch between °C and °F.
  • Press the left button to finish setting.

Odograph Setting (C8):

  • Press the left button to start setting.
  • Press the right button to modify the flashing digit.
  • Press the middle button to switch between digits.
  • Press the left button to finish setting.

Factory Reset (C7):

  • Press the left button to start setting.
  • Long press the middle button to restore factory settings. The computer will then turn off.

4. App Connection and Data Synchronization

Connecting to XOSS App:

  1. Download the "XOSS" app from Google Play (Android) or the App Store (iOS).
  2. നിങ്ങളുടെ ഇമെയിൽ ഉപയോഗിച്ച് ഒരു അക്കൗണ്ട് രജിസ്റ്റർ ചെയ്യുക.
  3. നിങ്ങളുടെ ഫോണിൽ ബ്ലൂടൂത്ത് പ്രവർത്തനക്ഷമമാക്കുക.
  4. Open the XOSS app, select "CYCPLUS M1" from the device list.
  5. Click "Connect" and choose your M1 computer from the found devices.
XOSS App Connection and Data Synchronization
Image: Screenshots showing the XOSS app interface for connecting the M1 and synchronizing data.

Syncing with Strava/Training Peaks:

  1. Within the XOSS app, find "Strava / Training Peaks" in your personal files അല്ലെങ്കിൽ ക്രമീകരണങ്ങൾ.
  2. Click to connect and log in with your Strava or Training Peaks account credentials. (Note: Google and Facebook account logins are not supported for this integration).
  3. Once connected, your ride data will automatically sync to Strava/Training Peaks after being uploaded to the XOSS app.
CYCPLUS M1 Strava Integration
Image: Visual guide for uploading ride data to CYCPLUS FIT and synchronizing with Strava.

5. പരിപാലനം

വൃത്തിയാക്കൽ:

സോഫ്റ്റ്, ഡി ഉപയോഗിച്ച് ഉപകരണം തുടയ്ക്കുകamp തുണി. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ഉപയോഗിക്കരുത്.

ജല പ്രതിരോധം:

The CYCPLUS M1 has an IPX6 waterproof rating, meaning it is splash-proof and can withstand rain. However, it is not designed to be submerged in water.

ബാറ്ററി കെയർ:

ബാറ്ററി ലൈഫ് വർദ്ധിപ്പിക്കാൻ, ഉപകരണം ഇടയ്ക്കിടെ പൂർണ്ണമായും ഡിസ്ചാർജ് ചെയ്യുന്നത് ഒഴിവാക്കുക. പതിവായി ചാർജ് ചെയ്യുക, പ്രത്യേകിച്ചും ഇത് കൂടുതൽ നേരം സൂക്ഷിക്കണമെങ്കിൽ.

മെമ്മറി മാനേജ്മെൻ്റ്:

The device has 16MB of internal memory, capable of storing approximately 150 hours of cycling data. When the memory is full, the computer will overwrite the oldest records chronologically. Regularly synchronize your data to the XOSS app to prevent data loss.

6. പ്രശ്‌നപരിഹാരം

  • ഉപകരണം ഓണാക്കുന്നില്ല: Ensure the device is fully charged. If it still doesn't turn on, try a long press on the left button. If unresponsive, perform a factory reset (see Operating Instructions).
  • GPS സിഗ്നൽ ലഭിച്ചില്ല: Make sure the device is in an open area with a clear view of the sky. Remain static for a few minutes after turning on to allow for signal acquisition.
  • ANT+ sensor not connecting: Ensure the sensor is active and within range. Check the ANT+ sensor connection settings (C2) on the M1 computer.
  • Data not syncing to app: Verify that Bluetooth is enabled on your phone and the M1 is correctly paired in the XOSS app. Check your internet connection for Strava/Training Peaks synchronization.
  • Incorrect speed/distance readings: Verify the wheel circumference setting (C3) is accurate.
  • Screen backlight issues: The backlight automatically activates from 18:00 to 9:00 after setting the time zone. It also lights up for 10 seconds after any button press. If it's not working as expected, check time zone settings or perform a factory reset.
  • Data recording stops unexpectedly: Ensure the device has sufficient battery. If the issue persists, a factory reset might be necessary.

7 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർസ്പെസിഫിക്കേഷൻ
മോഡൽM1
ഡിസ്പ്ലേ വലിപ്പം2.9 ഇഞ്ച് എൽസിഡി
ഡിസ്പ്ലേ കളർകറുപ്പും വെളുപ്പും
ഉൽപ്പന്ന വലുപ്പം90 x 53 x 20 മിമി
ഉൽപ്പന്ന ഭാരം77.5 ഗ്രാം
ബാറ്ററി ശേഷി1200 mAh 3.7 V
സഹിഷ്ണുത സമയം30-35 മണിക്കൂർ
ചാർജിംഗ് ഇൻ്റർഫേസ്ടൈപ്പ്-സി
ചാർജിംഗ് സമയംഏകദേശം 3.5 മണിക്കൂർ
മെമ്മറി കപ്പാസിറ്റി16MB (approx. 150 hours cycling data)
ബ്ലൂടൂത്ത് പതിപ്പ്5.0
ബാഹ്യ ഉപകരണങ്ങൾANT+ (Speed sensor, Cadence sensor, Heart rate monitor, Powermeter)
വാട്ടർപ്രൂഫ് ലെവൽIPX6
യാന്ത്രിക ഉറക്കംഅതെ
ഓട്ടോ-താൽക്കാലികമായി നിർത്തുകഅതെ
നാവിഗേഷൻഇല്ല
സർട്ടിഫിക്കേഷൻCE, FCC

Tire Circumference Chart:

Use this chart as a reference for setting the wheel circumference (C3). The actual circumference may vary slightly based on tire pressure.

ETRTOവലിപ്പംL(mm)ഇഞ്ച്ETRTOവലിപ്പംL(mm)ഇഞ്ച്
47-20312x1.7593528-59026x1-1/81970
54-20312x1.959401237-59026x1-3/82068
40-25414x1.5010201437-58426x1-1/2210026
47-25414x1.751055650C Tubular 26x7/81920
40-30516x1.50118520-571650x20 സി1938
47-30516x1.7511951623-571650x23 സി1944
54-30516x2.00124525-571650x25C 26x1(571)1952
28-34916x1-1/8129040-590650x38A2125
37-34916x1-3/8130040-584650X38B2105
32-36917x1-1/4(369)134025-63027x1 (630)2145
40-35518x1.50134028-63027x1-1/8215527
47-35518x1.7513501832-63027x1-1/42161
32-40620x1.25145037-63027x1-3/82169
35-40620x1.35146040-58427.5x1.502079
40-40620x1.50149050-58427.5x1.952090
47-40620x1.75151554-58427.5x2.1214827.5
50-40620x1.95156557-58427.5x2.252182
28-45120x1-1/8154518-622700x18 സി2070
37-45120x1-3/816152019-622700x19 സി2080
37-50122x1-3/817702220-622700x20 സി2086
40-50122x1-1/2178523-622700x23 സി2096
47-50724x1.7518902425-622700x25 സി2105
50-50724x2.00192528-622700x28 സി2136
54-50724x2.125196530-622700x30 സി2146
25-52024x1 (520)175332-622700x32 സി2155
24x3/4 Tubular1785700C ട്യൂബുലാർ2130700C
28-54024x1-1/8179535-622700x35 സി2168
32-54024x1-1/4190538-622700x38 സി2180
25-55926x1 (559)191340-622700x40 സി2200
32-55926x1.25195042-622700x42 സി2224
37-55926x1.40200544-622700x44 സി2235
40-55926x1.50201045-622700x45 സി2242
47-55926x1.75202347-622700x47 സി2268
50-55926x1.95205054-62229x2.1228829
54-55926x2.10206856-62229x2.22298
57-55926x2.125207060-62229x2.32326
58-55926x2.352083
75-55926x3.002170

8 ഉപയോക്തൃ നുറുങ്ങുകൾ

  • Power Meter Compatibility: While the M1 supports power meters via ANT+, some users have noted that specific power meters might not be immediately available or compatible. Ensure your power meter uses ANT+ and test connectivity.
  • Garmin Mount Compatibility: The M1 mount is similar to Garmin mounts, and some users have successfully used Garmin mounts with the M1. However, for optimal fit and security, it's recommended to use the provided CYCPLUS mount or a specifically designed compatible mount.
  • Indoor Cycling: The M1 primarily relies on GPS for speed and distance. For indoor cycling or spinning, you would need external speed/cadence sensors (ANT+) to get accurate data, as GPS will not function indoors.
  • ഭാഷാ പിന്തുണ: The device's primary language is English. While the manual is multilingual, the device interface is in English.
  • ഡാറ്റ കൃത്യത: For precise GPS tracking, ensure the device is in an open area away from obstructions. The speed of positioning can be affected by environment and weather conditions.

9. വാറൻ്റിയും പിന്തുണയും

വാറൻ്റി:

The CYCPLUS M1 GPS Bicycle Computer comes with a 1-year warranty for free replacement or repair from the date of purchase.

നിർമ്മാതാവിൻ്റെ വിവരങ്ങൾ:

  • നിർമ്മാതാവ്: ചെങ്‌ഡു ചെന്നിയൻ ഇന്റലിജന്റ് ടെക്‌നോളജി കോ., ലിമിറ്റഡ്.
  • വിലാസം: നമ്പർ 88 ടിയാൻചെൻ റോഡ്, ചെങ്ഡു, സിചുവാൻ പ്രവിശ്യ, ചൈന

പിന്തുണയുമായി ബന്ധപ്പെടുക:

For any after-sales inquiries or technical support, please contact us via email:

ഇമെയിൽ: steven@cycplus.com

For additional information and guides, you can refer to the official user manual PDF: CYCPLUS M1 User Manual (PDF)

10. ഉൽപ്പന്ന വീഡിയോ പ്രദർശനം

Watch this video for a visual guide on the CYCPLUS M1 GPS Bicycle Computer's features and operation.

വീഡിയോ: കഴിഞ്ഞുview of the CYCPLUS M1 GPS Bicycle Computer, demonstrating its features, button functions, and app connectivity.

CYCPLUS M1 GPS ബൈക്ക് കമ്പ്യൂട്ടർ: അൺബോക്സിംഗ്, ഇൻസ്റ്റാളേഷൻ, ക്രമീകരണ ഗൈഡ്

CYCPLUS M1 GPS ബൈക്ക് കമ്പ്യൂട്ടർ: അൺബോക്സിംഗ്, ഇൻസ്റ്റാളേഷൻ, ക്രമീകരണ ഗൈഡ്

4:21 • 1280×720 • നിർദ്ദേശങ്ങൾ

അനുബന്ധ രേഖകൾ - M1

പ്രീview CYCPLUS M1 GPS ബൈക്ക് കമ്പ്യൂട്ടർ യൂസർ മാനുവൽ
CYCPLUS M1 GPS ബൈക്ക് കമ്പ്യൂട്ടറിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, സജ്ജീകരണം, സവിശേഷതകൾ, ക്രമീകരണങ്ങൾ, ഇൻസ്റ്റാളേഷൻ എന്നിവ ഉൾക്കൊള്ളുന്നു. സൈക്ലിംഗ് ട്രാക്കിംഗിനും ഡാറ്റ വിശകലനത്തിനും നിങ്ങളുടെ ഉപകരണം എങ്ങനെ ഉപയോഗിക്കാമെന്ന് മനസിലാക്കുക.
പ്രീview CYCPLUS M2 GPS ബൈക്ക് കമ്പ്യൂട്ടർ യൂസർ മാനുവൽ
This user manual provides comprehensive instructions for the CYCPLUS M2 GPS Bike Computer, covering setup, operation, features, settings, and app connectivity for cyclists.
പ്രീview സൈക്പ്ലസ് എം2 ജിപിഎസ് സൈക്ലിംഗ് കമ്പ്യൂട്ടർ യൂസർ മാനുവൽ
സൈക്പ്ലസ് M2 ജിപിഎസ് സൈക്ലിംഗ് കമ്പ്യൂട്ടറിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, സജ്ജീകരണം, പ്രവർത്തനം, ക്രമീകരണങ്ങൾ, XOSS, Strava പോലുള്ള ആപ്പുകളുമായുള്ള കണക്റ്റിവിറ്റി, സുരക്ഷാ വിവരങ്ങൾ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview സൈക്പ്ലസ് എം1 സ്മാർട്ട് ജിപിഎസ് ബൈക്ക് കമ്പ്യൂട്ടർ ക്വിക്ക് സ്റ്റാർട്ട് ഗൈഡ്
സൈക്പ്ലസ് എം1 സ്മാർട്ട് ജിപിഎസ് ബൈക്ക് കമ്പ്യൂട്ടർ സജ്ജീകരിക്കുന്നതിനും ഉപയോഗിക്കുന്നതിനുമുള്ള ഒരു സമഗ്ര ഗൈഡ്, അടിസ്ഥാന പ്രവർത്തനങ്ങൾ, ക്രമീകരണങ്ങൾ, കണക്റ്റിവിറ്റി എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview സൈക്പ്ലസ് M1 സൈക്ലിംഗ് കമ്പ്യൂട്ടർ ഉപയോക്തൃ മാനുവൽ
Cycplus M1 സൈക്ലിംഗ് കമ്പ്യൂട്ടറിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, സജ്ജീകരണം, സവിശേഷതകൾ, കണക്റ്റിവിറ്റി, അറ്റകുറ്റപ്പണി എന്നിവ ഉൾക്കൊള്ളുന്നു. റൈഡുകൾ ട്രാക്ക് ചെയ്യുന്നതിനും, Strava പോലുള്ള ആപ്പുകളിലേക്ക് കണക്റ്റ് ചെയ്യുന്നതിനും, അതിന്റെ സ്പെസിഫിക്കേഷനുകൾ മനസ്സിലാക്കുന്നതിനും നിങ്ങളുടെ ഉപകരണം എങ്ങനെ ഉപയോഗിക്കാമെന്ന് മനസിലാക്കുക.
പ്രീview CYCPLUS M1 GPS സ്മാർട്ട് സൈക്ലിംഗ് കമ്പ്യൂട്ടർ ക്വിക്ക് സ്റ്റാർട്ട് ഗൈഡ്
CYCPLUS M1 GPS സ്മാർട്ട് സൈക്ലിംഗ് കമ്പ്യൂട്ടറിനായുള്ള ക്വിക്ക് സ്റ്റാർട്ട് ഗൈഡും യൂസർ മാനുവലും, ഉൽപ്പന്ന ഘടകങ്ങൾ, മൗണ്ടിംഗ്, സവിശേഷതകൾ, ഉപയോഗം, ക്രമീകരണങ്ങൾ, ആപ്പ് കണക്റ്റിവിറ്റി, ഡാറ്റ വിശകലനം, സ്പെസിഫിക്കേഷനുകൾ, വാറന്റി എന്നിവ ഉൾക്കൊള്ളുന്നു.