ACEMIC PR-8/ST-4

ACEMIC PR-8/ST-4 UHF Wireless Saxophone Microphone System

ഉപയോക്തൃ മാനുവൽ

ആമുഖം

Thank you for choosing the ACEMIC PR-8/ST-4 UHF Wireless Saxophone Microphone System. This system is designed to provide high-quality audio capture for saxophones and other wind instruments, offering freedom of movement with reliable wireless performance. This manual will guide you through the setup, operation, and maintenance of your new wireless microphone system.

പാക്കേജ് ഉള്ളടക്കം

എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കാൻ പാക്കേജ് ശ്രദ്ധാപൂർവ്വം പരിശോധിക്കുക:

  • ACEMIC PR-8 UHF Diversity Wireless Receiver
  • ACEMIC ST-4 Wireless Transmitter (Saxophone Microphone)
  • Power Adapter (for receiver)
  • 6.35എംഎം ഓഡിയോ ഔട്ട്പുട്ട് കേബിൾ
  • ഉടമയുടെ മാനുവൽ

വീഡിയോ: അൺബോക്സിംഗ്, പിന്നെയുംview of the ACEMIC PR-8/ST-4 system components.

ACEMIC PR-8/ST-4 Wireless Saxophone Microphone system in its carrying case.

Image: ACEMIC PR-8/ST-4 Wireless Saxophone Microphone system neatly packed in its carrying case.

ACEMIC PR-8/ST-4 system components laid out.

Image: All components of the ACEMIC PR-8/ST-4 system laid out, including receiver, transmitter, cables, and power adapter.

ഫീച്ചറുകൾ

  • UHF 660-690MHz frequency range (region dependent)
  • PLL Synthesized, pre-set 100 selectable frequencies
  • Antenna diversity for maximum range up to 80 meters (line-of-sight)
  • Pre-set 100 (10*10) frequency selectable groups
  • IR synchronization for downloading frequency from receiver to transmitter
  • LCD display shows RF level, AF level, channel, and frequency
  • Patented design with rubber cover to protect the wind instrument
  • Receiver powered by 2x 1.5V AA batteries or DC9V/500mA adapter, convenient for outdoor and indoor use
  • Designed for saxophone, trumpet, trombone, tuba, and horn applications
Diagram showing PR-8 receiver with 100m line-of-sight range.

Image: The PR-8 receiver highlighting its true diversity wireless capability and operating range up to 100 meters line-of-sight for outdoor use.

Diagram showing PR-8 receiver with 10-hour battery life and saxophone player.

Image: The PR-8 receiver emphasizing strong endurance for better outdoor performance, with up to 10 hours of continuous use.

സ്പെസിഫിക്കേഷനുകൾ

സമഗ്രമായ പ്രകടനം

  • ഫ്രീക്വൻസി ശ്രേണി: 660-690MHz
  • മോഡുലേഷൻ മോഡ്: FM
  • ചലനാത്മക ശ്രേണി: >100dB
  • ഫ്രീക്വൻസി പ്രതികരണം: 60Hz-17KHz ±3dB
  • ആകെ ഹാർമോണിക് ഡിസ്റ്റോർഷൻ: 0.5KHz-ൽ <1%
  • സിഗ്നൽ/ശബ്ദ അനുപാതം: ≥108dB

Receiver (PR-8)

  • ഫ്രീക്വൻസി ശ്രേണി: 660-690MHz
  • സംവേദനക്ഷമത സ്വീകരിക്കുക: -110dBm (sinad ≥30dB)
  • സിഗ്നൽ/ശബ്ദ അനുപാതം: >105dB
  • വൈദ്യുതി വിതരണം: DC9V/500mA or 2x 1.5V AA Battery
  • ഓഡിയോ ഔട്ട്പുട്ട്: 1x 6.35mm jack socket

Transmitter (ST-4)

  • ഫ്രീക്വൻസി ശ്രേണി: 660-690MHz
  • RF പവർ: 10mW
  • മൈക്രോഫോൺ തരം: കണ്ടൻസർ
  • സംവിധാനം: കാർഡിയോഓയിഡ്
  • വ്യതിയാനം: ±48KHz
  • ആൻ്റിന: 1/4 wave Length wire type
  • ബാറ്ററി വോളിയംtage: 1.5V (1x 1.5V AA Battery)
  • വൈദ്യുതി ഉപഭോഗം: Up to 10 hours (battery-dependent)

കുറിപ്പ്: ഉൽപ്പന്നത്തിനൊപ്പം ബാറ്ററികൾ ഉൾപ്പെടുത്തിയിട്ടില്ല.

സജ്ജമാക്കുക

  1. Powering the Receiver (PR-8):
    For indoor use, connect the provided DC9V/500mA power adapter to the receiver's power input and plug it into a wall outlet. For outdoor or portable use, open the battery compartment on the underside of the receiver and insert two (2) 1.5V AA batteries, ensuring correct polarity.
  2. Connecting the Receiver to an Audio System:
    Connect one end of the 6.35mm audio output cable to the audio output socket on the receiver. Connect the other end to the input of your speaker, mixer, or sound card.
  3. Powering the Transmitter (ST-4):
    Open the battery compartment on the ST-4 transmitter and insert one (1) 1.5V AA battery, observing correct polarity.
  4. Attaching the Transmitter:
    The ST-4 transmitter features a clip-on design. Securely attach it to the bell of your saxophone or other wind instrument. Adjust the flexible gooseneck to position the microphone capsule appropriately for optimal sound capture.
  5. ആൻ്റിന സജ്ജീകരണം:
    Ensure both antennas on the PR-8 receiver are securely attached and positioned upright for best signal reception.
Diagram showing battery compartment (2xAA) for receiver and 6.35mm audio output/power input.

ചിത്രം: വിശദമായത് view of the PR-8 receiver's battery compartment (for 2xAA batteries) and the 6.35mm audio output socket with power input.

ACEMIC ST-4 microphone attached to a saxophone.

Image: The ST-4 microphone transmitter securely clipped onto a saxophone, demonstrating proper placement.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

  1. പവർ ഓൺ/ഓഫ്:
    Press and hold the power button on both the PR-8 receiver and ST-4 transmitter until their respective displays illuminate. To power off, press and hold the power button again.
  2. Frequency Synchronization (IR Sync):
    Ensure both units are powered on. On the PR-8 receiver, select your desired channel/frequency using the control buttons. Then, align the IR windows of the receiver and transmitter (usually marked 'IR') and press the 'IR Sync' button on the receiver. The frequency will be automatically transferred to the transmitter.
  3. വോളിയം ക്രമീകരിക്കുന്നു:
    Use the volume knob on the PR-8 receiver to adjust the output level to your audio system. Start with a low volume and gradually increase it to avoid feedback or clipping.
  4. നിശബ്‌ദ പ്രവർത്തനം:
    The ST-4 transmitter has a mute button. Press it briefly to mute the microphone output. Press again to unmute. The LCD display on the receiver will indicate the mute status.
  5. മോണിറ്ററിംഗ് ഡിസ്പ്ലേ:
    The LCD display on the PR-8 receiver shows important information such as RF (Radio Frequency) level, AF (Audio Frequency) level, current channel, and operating frequency. Monitor these indicators for optimal performance.
Close-up of ACEMIC PR-8 receiver display and controls.

Image: Close-up of the ACEMIC PR-8 receiver's LCD display, showing RF/AF levels, group, channel, and frequency, along with control buttons.

മെയിൻ്റനൻസ്

  • ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: Replace batteries in both the receiver and transmitter when the low battery indicator appears on the LCD display or when performance degrades. Always use fresh, high-quality 1.5V AA batteries.
  • വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the exterior of both units. For the microphone capsule and rubber instrument cover, a slightly damp തുണി ഉപയോഗിക്കാം, പക്ഷേ ഇലക്ട്രോണിക് ഘടകങ്ങളിൽ ഈർപ്പം കയറുന്നില്ലെന്ന് ഉറപ്പാക്കുക.
  • സംഭരണം: When not in use for extended periods, remove batteries from both units to prevent leakage. Store the system in its original carrying case in a cool, dry place away from direct sunlight and extreme temperatures.
  • ആന്റിന കെയർ: Handle antennas with care. Avoid bending them excessively or applying undue force, as this can damage the internal wiring and affect signal quality.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ശബ്ദ ഔട്ട്പുട്ട് ഇല്ലReceiver/Transmitter not powered on; Low batteries; Incorrect frequency sync; Audio cable disconnected; Mute function active.Ensure both units are on; Replace batteries; Perform IR sync; Check audio cable connections; Deactivate mute on transmitter.
Poor sound quality (static, dropouts)Interference; Out of range; Low batteries; Obstructions between units.Change frequency/channel; Reduce distance between units; Replace batteries; Ensure clear line-of-sight.
Receiver not powering onPower adapter faulty/disconnected; Dead batteries.Check power adapter connection and functionality; Replace AA batteries.
Transmitter not powering onഡെഡ് ബാറ്ററി.Replace AA battery.

ഉപയോക്തൃ ടിപ്പുകൾ

  • ഒപ്റ്റിമൽ പ്ലേസ്മെൻ്റ്: Experiment with the microphone's position on your instrument to find the sweet spot that captures the best tone and minimizes key noise.
  • വീക്ഷണരേഖ: For the most stable connection and maximum range, try to maintain a clear line of sight between the transmitter and receiver antennas.
  • ബാറ്ററി മാനേജ്മെൻ്റ്: Always carry spare batteries, especially for live performances or extended outdoor use.
  • ഇടപെടൽ പരിശോധന: If you experience interference, try changing the operating frequency on the receiver and re-syncing the transmitter. Avoid placing the receiver near other wireless devices or strong electromagnetic fields.

വാറൻ്റിയും പിന്തുണയും

വാറന്റി വിവരങ്ങൾ, സാങ്കേതിക പിന്തുണ, അല്ലെങ്കിൽ സേവന അന്വേഷണങ്ങൾ എന്നിവയ്ക്കായി, നിങ്ങളുടെ യഥാർത്ഥ വാങ്ങൽ പോയിന്റുമായോ നിർമ്മാതാവുമായോ നേരിട്ട് ബന്ധപ്പെടുക. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.


ACEMIC PR-8/ST-4 UHF Wireless Saxophone Microphone System Unboxing & Overview

ACEMIC PR-8/ST-4 UHF Wireless Saxophone Microphone System Unboxing & Overview

1:41 • 540×952 • അൺബോക്സിംഗ്