1. ആമുഖം
The ANYCUBIC Water Wash ABS-Like Resin 3.0 is an advanced photopolymer resin designed for LCD 3D printers. It offers a balanced combination of toughness, resilience, high precision, and a low shrinkage rate, making it suitable for a wide range of 3D printing applications. This resin is water-washable, simplifying the post-processing cleanup and reducing the need for harsh chemicals. It also features minimal odor for a more pleasant printing experience.
2. സജ്ജീകരണവും തയ്യാറെടുപ്പും
Proper preparation is crucial for successful 3D printing with resin. Follow these steps before starting your print:
- നന്നായി കുലുക്കുക: Before each use, thoroughly shake the resin bottle for at least 30 seconds to ensure all components are evenly mixed.
- താപനില: Ensure your printing environment is within the recommended temperature range of 20-50°C (64-95°F).
- വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (PPE): Always wear gloves and a mask to avoid direct skin contact and inhalation of resin fumes. Work in a well-ventilated area.
- പ്രിന്റർ അനുയോജ്യത: This resin is compatible with all LCD/DLP printers that use 405nm UV light curing technology. It is optimized for Anycubic LCD printers.
- Pouring Resin: Carefully pour the desired amount of resin into your printer's resin vat. Do not overfill.
3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once your printer is set up and resin is loaded, you can begin the printing process.
3.1 അച്ചടി
- സ്ലൈസിംഗ് സോഫ്റ്റ്വെയർ: Use your preferred slicing software to prepare your 3D model.
- എക്സ്പോഷർ പാരാമീറ്ററുകൾ: Refer to the table below for recommended exposure parameters for various Anycubic Photon Mono series printers. Adjust settings as needed for your specific printer and model.
| 3D പ്രിൻ്റർ | Layer Thickness /mm | Normal Exposure Time/s | Light-Off Time/s | Bottom Exposure Time/s | താഴത്തെ പാളികൾ | ആന്റി-അലിasing Level | Z Lift Distance/ mm | Z Lift Speed/ mm/s | Z Retract Speed/ mm/s |
|---|---|---|---|---|---|---|---|---|---|
| ഫോട്ടോൺ മോണോ M7 | 0.05 | 2.2 | 1 | 35 | 4 | 1 | 8 | 6 | 6 |
| ഫോട്ടോൺ മോണോ M7 പ്രോ | 0.05 | 2 | 1 | 25 | 4 | 1 | 8 | 6 | 6 |
| ഫോട്ടോൺ മോണോ M7 മാക്സ് | 0.05 | 2 | 0.5 | 30 | 5 | 1 | 8 | 6 | 6 |
| ഫോട്ടോൺ മോണോ M5 | 0.05 | 2.8 | 0.5 | 25 | 6 | 1 | 8 | 6 | 6 |
| ഫോട്ടോൺ മോണോ M5s | 0.05 | 3 | 0.5 | 25 | 5 | 1 | 8 | 6 | 6 |
| Photon Mono M5s Pro | 0.05 | 3.6 | 1 | 30 | 5 | 1 | 8 | 6 | 6 |
| ഫോട്ടോൺ മോണോ 4 | 0.05 | 2.8 | 1 | 30 | 5 | 1 | 6 | 4 | 6 |
| ഫോട്ടോൺ മോണോ 4K | 0.05 | 2 | 0.5 | 40 | 6 | 1 | 8 | 4 | 6 |
| Photon Mono 4 Ultra | 0.05 | 2.6 | 1 | 30 | 5 | 1 | 5 | 8 | 8 |
| ഫോട്ടോൺ മോണോ 2 | 0.05 | 2.5 | 1 | 28 | 5 | 1 | 6 | 4 | 6 |
| ഫോട്ടോൺ മോണോ X2 | 0.05 | 2.5 | 0.5 | 25 | 5 | 1 | 8 | 2 | 3 |
| ഫോട്ടോൺ മോണോ X 6K | 0.05 | 2 | 0.5 | 23 | 6 | 1 | 8 | 2 | 3 |
| Photon Mono X6Ks | 0.05 | 2.5 | 0.5 | 20 | 6 | 1 | 8 | 2 | 3 |
| ANYCUBIC ഫോട്ടോൺ M3 മാക്സ് | 0.05 | 3 | 2 | 30 | 6 | 1 | 10 | 4 | 4 |
| ഏതൊരു ക്യൂബിക് ഫോട്ടോൺ M3 പ്രീമിയം | 0.05 | 2.5 | 0.5 | 25 | 3 | 1 | 8 | 6 | 6 |
*We recommend setting the first layer exposure duration to 35-40s when printing with HD gray resin.
3.2 പോസ്റ്റ്-പ്രോസസ്സിംഗ്
- പ്രിന്റ് നീക്കം ചെയ്യുക: Carefully remove the printed model from the build plate.
- Support Removal: Remove any necessary support structures. The resin is designed for easy support removal, even for delicate parts.
- Water Washing: Thanks to hydrophilic agents, the resin is water-washable. Rinse the printed model thoroughly with water to remove residual liquid resin.
- ക്യൂറിംഗ്: After washing, cure the model under UV light according to your printer's recommendations to achieve optimal hardness and strength.
Environmental Note: Avoid direct wastewater disposal into the sewer system to protect groundwater from contamination.
4. പരിപാലനവും സംഭരണവും
Proper maintenance and storage will prolong the life of your resin and ensure consistent print quality.
- സംഭരണം: Store the resin in a sealed container in a cool, dark place, away from direct sunlight and dust.
- ഷെൽഫ് ലൈഫ്: The resin has a shelf life of 1 year.
- Unused Resin: Filter any unused resin from the vat back into its original bottle for future use.
- വൃത്തിയാക്കൽ: Clean your resin vat and build plate thoroughly after each print session.
5. പ്രശ്നപരിഹാരം
ചില സാധാരണ പ്രശ്നങ്ങളും അവയുടെ സാധ്യമായ പരിഹാരങ്ങളും ഇതാ:
- പ്രിന്റ് പരാജയം: Ensure correct exposure settings for your printer model (refer to the table in Section 3.1). Check for proper bed leveling and sufficient support structures.
- Greasy or White Stains on Prints: This resin has a lower water absorption rate to mitigate such issues. Ensure thorough washing with clean water and proper curing.
- ക്രാക്കിംഗ്: The water-washable formula is designed to make cured prints less prone to cracking. Ensure prints are fully cured and not exposed to excessive stress immediately after printing.
- Poor Detail/Accuracy: Verify your printer's calibration and ensure the resin is well-mixed before use.
6 സ്പെസിഫിക്കേഷനുകൾ
6.1 Physical Properties
| സ്വത്ത് | മൂല്യം |
|---|---|
| മെറ്റീരിയൽ | Hydrophilic group-modified light-curing resin |
| തരംഗദൈർഘ്യം | 365-405nm |
| വിസ്കോസിറ്റി | 400-500/mPa.s (25°C) |
| സാന്ദ്രത | 1.07-1.09/g/cm3 |
6.2 മെക്കാനിക്കൽ പ്രോപ്പർട്ടികൾ
| സ്വത്ത് | മൂല്യം |
|---|---|
| കാഠിന്യം | 83-86എച്ച്ഡി |
| വലിച്ചുനീട്ടാനാവുന്ന ശേഷി | 36-46MPa |
| ഇടവേളയിൽ നീളം | 35-45% |
| Bending Modulus | 40-50MPa |
| വളയുന്ന ശക്തി | 2000-2500MPa |
| Young's Modulus | 1800-2300MPa |
| ഐസോഡ് ഇംപാക്ട് ശക്തി | 133ജെ/മീ |
| Volume Shrinkage Rate | 4-5% |
6.3 ലഭ്യമായ നിറങ്ങൾ
| നിറം | Hex Color Value | കളർ ഡിസ്പ്ലേ |
|---|---|---|
| കറുപ്പ് | #212721 | |
| വെള്ള | #EFF0F1 | |
| ബീജ് | #FCC89B | |
| ചാരനിറം | #7E93A7 | |
| HD Gray | #768692 | |
| ക്ലിയർ | / | |
| Translucent Red | #D22630 | |
| Translucent Green | #009A17 | |
| Smoky Black | #688197 |
കുറിപ്പ്: Products used in the pictures are real products, still there may be color difference due to light or display. The color of the product received shall prevail.
7 ഉപയോക്തൃ നുറുങ്ങുകൾ
- Painting Prints: After your models are fully cured, they can be painted using standard model paints to add further customization and detail.
- Resin Mixing: Always ensure the resin is thoroughly mixed before pouring into the vat, especially if it has been sitting for a while, to prevent pigment separation and ensure consistent print quality.
- വെൻ്റിലേഷൻ: Maintain good ventilation in your printing area to minimize exposure to resin fumes, even with low-odor resins.
- നീക്കം ചെയ്യൽ: Dispose of cured resin and contaminated water responsibly, following local regulations. Never pour liquid resin or contaminated water directly down the drain.
8. വാറൻ്റിയും പിന്തുണയും
ANYCUBIC provides support for its products. For any issues or inquiries regarding your ABS-Like Resin 3.0, please refer to the official ANYCUBIC website or contact their customer service for assistance. Keep your purchase receipt as proof of purchase for any warranty claims.
