1. ആമുഖം
Thank you for choosing the WHEEL TOP EDS OX Electronic Derailleur System. This manual provides detailed instructions for the installation, operation, and maintenance of your new electronic shifting system. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.
2. ഉൽപ്പന്നം കഴിഞ്ഞുview
The WHEEL TOP EDS OX is an advanced electronic derailleur system designed for seamless and precise gear shifting on bicycles. It features a wireless connection between the shifter and rear derailleur, offering a clean and efficient setup.
2.1 ഘടകങ്ങൾ
2.2 ഭാഗം തിരിച്ചറിയൽ
- ഷിഫ്റ്റർ:
- എ. ബട്ടൺ
- ബി. എൽഇഡി ഇൻഡിക്കേറ്റർ
- C. Clamp
- ഡി.ബോൾട്ട്
- E. Switch (pairing/mode switching)
- F. ബാറ്ററി കവർ
- പിൻഭാഗത്തെ ഡെറൈലിയർ:
- A. Mounting bolt
- B. High limit screw
- C. Low limit screw
- D. LED സൂചകം
- E. Guide roller
- F. Adjustment screw
- G. Magnetic charging port
3 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| ബ്രാൻഡ് നാമം | റോക്ക്ബ്രോസ് |
| മോഡൽ നമ്പർ | EDS OX |
| ഉൽപ്പന്നത്തിൻ്റെ പേര് | ഇലക്ട്രോണിക് ഡെറൈലിയർ സിസ്റ്റം |
| ഇനം നമ്പർ | 41210060006/41210060005/41210060004 |
| മെറ്റീരിയൽ | അലുമിനിയം അലോയ് |
| വേഗത പരിധി | Support 7-13 speed gear freewheels |
| Rear Derailleur Battery | 800mAh |
| Shift Count (Full Power) | About 20,000 shifts |
| ശേഷിക്കുന്ന ബാറ്ററി നില | Indication on the mobile app |
| ചാർജ്ജിംഗ് റിമൈൻഡർ | Red light: Charging, Green light: Charging complete |
| ഷിഫ്റ്റർ ബാറ്ററി | CR2032 * 1 |
| പാക്കേജ് അളവുകൾ (L x W x H) | 30cm x 25cm x 20cm (ഏകദേശം) |
| പാക്കേജ് ഭാരം | 0.14 കി.ഗ്രാം (ഏകദേശം) |
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Please follow these steps carefully for proper installation. It is recommended to wear gloves during installation to keep components clean.
4.1 ഷിഫ്റ്റർ ഇൻസ്റ്റാളേഷൻ
- Remove the existing grip and brake lever from your handlebar.
- Secure the EDS OX shifter in a suitable position on the handlebar.
- Use a 5mm Allen wrench to tighten the screw on the shifter clamp.
- Reinstall the brake lever.
- Reinstall the grip and tighten its screws.
- Slide the switch on the shifter to the "T" position.
- Rotate and open the rear cover of the shifter using a coin.
- Insert a CR2032 battery into the shifter.
- Close the rear cover and slide the switch to "N" to prepare for pairing with the rear derailleur.
4.2 Rear Derailleur Installation
- Align the rear derailleur with the dropout on your bicycle frame.
- Tighten the mounting screws using a 5mm hex key.
- Thread the chain through the rear derailleur. Ensure the chain passes above the small metal plate.
- Align the chain with the smallest gear on the cassette and thread it through the derailleur.
- Align the chain with the freewheel teeth.
- Align both ends of the chain.
- Securely close the chain using a chain tool.
- Use a 5mm hex key to adjust the adjustment bolt according to your actual needs for proper chain tension.
- Use a 5mm hex key to adjust the high limit bolt to prevent the chain from overshifting off the largest cog.
- Use a 5mm hex key to adjust the low limit bolt to prevent the chain from overshifting off the smallest cog.
- Installation is complete. Carefully check if all bolts are tightened and the chain moves freely.
4.3 ഇൻസ്റ്റലേഷൻ വീഡിയോ ഗൈഡ്
5. ഓപ്പറേഷൻ
5.1 Basic Shifting
The EDS OX shifter features a user-friendly button design for easy and quick gear shifting. Press the buttons to shift up or down through your gears.
5.2 APP Pairing and Fine-Tuning
The system supports convenient APP pairing for fine-tuning and monitoring.
- To enter fine-tuning/pairing mode, a blue light will illuminate on the shifter.
- The rear derailleur will indicate pairing mode with continuous blinking.
- Use the dedicated mobile application to connect to your EDS OX system for adjustments and to view ബാറ്ററി ലെവലുകൾ.
6. പരിപാലനം
6.1 ചാർജിംഗ്
The rear derailleur features magnetic charging for convenience.
- The rear derailleur has an 800mAh battery capacity.
- Use a 5V/1A charger. A full charge typically takes only 2 hours.
- A red light indicates charging, and a green light indicates charging is complete.
- പ്രധാനപ്പെട്ടത്: Please stop charging and remove the battery if the green light is not on after 6 hours of charging to prevent overcharging.
- The shifter uses a CR2032 battery. Replace it when the battery level is low.
6.2 ജല പ്രതിരോധം
The system offers daily splash resistance, suitable for rides in light rain. However, avoid prolonged exposure to heavy rain to prevent damage.
6.3 Jockey Wheel Care
The metal jockey wheels are designed for smooth and durable performance. Regular cleaning and lubrication of your chain and jockey wheels will reduce wear and improve your riding experience.
7. പ്രശ്നപരിഹാരവും മുൻകരുതലുകളും
7.1 പൊതുവായ മുൻകരുതലുകൾ
- The front shifter is pre-paired; new pairing is generally not required.
- Do not remove the battery from the shifter while performing shifting operations.
- If any improper operation occurs during pairing, the entire pairing process should be repeated.
- After each magnetic connection (e.g., charging), the system may enter pairing mode by default, and the rear derailleur indicator will flash blue. If already paired, no special attention is needed.
- There is no need to re-pair the system after each charging operation.
- If any part of the system is replaced, added, or removed, the pairing process must be repeated.
7.2 ഉപയോക്തൃ നുറുങ്ങുകൾ
- Ensure your handlebar diameter is approximately 22.2mm for proper shifter fit.
- Regularly check the battery level via the mobile app to avoid unexpected power loss during rides.
- Keep the system clean, especially after riding in wet or dusty conditions, to maintain smooth operation.
8. വാറൻ്റിയും പിന്തുണയും
This product is covered by a 365-day warranty from the date of purchase. For any technical support or warranty claims, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.
