YRHAND HK1PRO Tuya WiFi Smart Door Lock Instruction Manual

ഉൽപ്പന്നം കഴിഞ്ഞുview

The YRHAND HK1PRO is a digital electronic smart door lock featuring multiple unlocking methods, a built-in camera, and a peephole viewer. It integrates with the Tuya Smart Home platform via WiFi for enhanced control and monitoring. This lock is designed for various door types, offering advanced security and convenience.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Before installation, ensure your door meets the required specifications for thickness and mortise type. The lock is compatible with door thicknesses ranging from 40mm to 90mm and uses a 6068 anti-theft mortise (available in 24x240mm square or 30x240mm cylindrical variants).

പ്രീ-ഇൻസ്റ്റലേഷൻ അളവുകൾ

Carefully measure your door's thickness, the length of the guide sheet, and the width of the guide sheet to ensure proper fitment.

Mortise Selection

Choose the correct mortise type (square or cylindrical) based on your door's requirements. The lock supports 6068 anti-theft mortises.

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ

For a detailed visual guide on installation, please refer to the official installation video below. The video demonstrates the process of installing the mortise, connecting wiring, and assembling the lock components.

1. മോർട്ടൈസ് ഇൻസ്റ്റാൾ ചെയ്യുക: Secure the 6068 mortise into the door frame using screws.
2. Prepare the Lock Panels: Connect the necessary wires between the front and rear lock panels.
3. Attach the Front Panel: Carefully align and attach the front panel to the door, ensuring wires pass through correctly.
4. Attach the Rear Panel: Connect the wires to the rear panel's circuit board and secure the panel to the door using screws.
5. ബാറ്ററികൾ ചേർക്കുക: Open the battery compartment on the rear panel and insert 8 AA dry batteries.
6. ടെസ്റ്റ് പ്രവർത്തനം: After assembly, test all unlocking methods and ensure the lock operates smoothly.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

അൺലോക്ക് രീതികൾ

The YRHAND HK1PRO offers six convenient ways to unlock your door:

• ഫിംഗർപ്രിന്റ് അൺലോക്ക്: Place your registered finger on the biometric sensor for instant access (0.5s unlock time, <0.00001% error rate).
• പാസ്‌വേഡ് അൺലോക്ക്: Enter your registered passcode on the keypad. The lock supports virtual passwords, allowing you to enter random digits before and after your actual password to prevent peeping.
• IC Card / NFC Unlock: Tap a registered IC card or NFC-enabled device on the designated area.
• മെക്കാനിക്കൽ കീ അൺലോക്ക്: Use the provided physical key for emergency access.
• APP റിമോട്ട് അൺലോക്ക്: Use the Tuya APP on your smartphone to unlock the door remotely.
• Wristband Unlock: Tap a registered wristband on the designated area.

Tuya APP Features

The Tuya APP provides comprehensive control and monitoring capabilities for your smart lock:

• ഉപയോക്തൃ മാനേജ്മെന്റ്: Easily manage user permissions, create, and delete fingerprints, passcodes, or cards.
• റിമോട്ട് അൺലോക്ക്: Receive unlock requests on your phone when someone rings the doorbell and grant access remotely.
• Alerts & Operation Logs: The app records all unlocking operations and alerts you if the door sounds an alarm.
• ഫോട്ടോ ക്യാപ്ചർ: Know who is at your door in real-time through photo capture when the doorbell is pressed.

Peephole and Camera Functions

The lock features a built-in camera and a 3.5-inch large visual screen for enhanced security:

• Large Visual Screen: Press the doorbell, and the 3.5-inch screen lights up, allowing you to see who is outside.
• HD Night Vision Camera: The camera provides a large wide-angle view with HD night vision, ensuring clear visibility even in low-light conditions.

അധിക സവിശേഷതകൾ

• നിശ്ശബ്ദമായ മോഡ്: Turn on or off the voice prompt for quiet operation.
• Anti-lock Knob: After the indoor lock is reversed, the outdoor door cannot be opened, providing an extra layer of security.
• Electromagnetic Interference Shielding: The lock is shielded from electromagnetic interference, preventing unauthorized opening methods.

മെയിൻ്റനൻസ്

Power Supply and Emergency Options

The smart lock is powered by 8 AA alkaline dry batteries. A full charge can last approximately 3 months.

• ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: When the low battery warning is issued, replace all 8 AA batteries promptly.
• എമർജൻസി മെക്കാനിക്കൽ കീ: In case of complete power loss, use the mechanical key for emergency unlocking.
• Emergency USB Power: If batteries are depleted, connect a power bank via the USB power outlet for temporary power to unlock the door.

വൃത്തിയാക്കൽ

• Wipe the lock's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Keep the fingerprint sensor and camera lens clean for optimal performance.

ട്രബിൾഷൂട്ടിംഗ്

• ലോക്ക് പ്രതികരിക്കുന്നില്ല: Check battery levels. If batteries are low, replace them or use the emergency USB power.
• വിരലടയാളം തിരിച്ചറിയാൻ കഴിഞ്ഞില്ല: Ensure your finger and the sensor are clean and dry. Re-register your fingerprint if issues persist.
• പാസ്‌വേഡ് പ്രവർത്തിക്കുന്നില്ല: Double-check the entered password. Try the virtual password feature if you suspect someone is watching.
• ആപ്പ് കണക്റ്റിവിറ്റി പ്രശ്നങ്ങൾ: Ensure your home WiFi network (2.4GHz) is stable and the lock is within range. Restart the lock and your router if necessary.
• Doorbell not activating screen: Check connections and ensure the doorbell button is functioning correctly.

സ്പെസിഫിക്കേഷനുകൾ

ഉപയോക്തൃ ടിപ്പുകൾ

• ജല പ്രതിരോധം: The lock has an IP66 protection level, meaning it is protected against dust and powerful water jets. It is suitable for outdoor use where it might be exposed to rain or splashes, but it is not designed for immersion in water.
• ഊർജ്ജ സ്രോതസ്സ്: This smart lock operates on 8 AA dry batteries and does not use direct electrical power. Always keep spare batteries on hand or utilize the emergency USB power option if batteries run out unexpectedly.
• വൈഫൈ കണക്റ്റിവിറ്റി: Ensure your WiFi network is 2.4GHz for proper connection, as the lock does not support 5GHz networks.

വാറൻ്റിയും പിന്തുണയും

The YRHAND HK1PRO Smart Door Lock comes with a 24-month Manufacturer's Limited Warranty for defective items. This warranty does not cover items damaged due to misuse or improper handling after receipt.

• റിപ്പോർട്ടിംഗ് വൈകല്യങ്ങൾ: Defective items must be reported and returned within the warranty period, ideally in their original packaging. Please provide your order number when reporting.
• റിട്ടേൺ മെർച്ചൻഡൈസ് ഓതറൈസേഷൻ (RMA): Before returning any product, an RMA must be obtained by contacting the seller.
• റിട്ടേൺ ഷിപ്പിംഗ്: The buyer is responsible for the cost of returning any merchandise.

For any concerns or support, please contact the seller directly. Your satisfaction is important, and they strive to address any issues promptly and effectively.