ആമുഖം
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Autonics Temperature Sensor/Controller. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent potential hazards.
The Autonics Temperature Sensor/Controller is designed for precise temperature measurement and control in various industrial and commercial applications. It features a digital display and multiple control outputs.
1. സജ്ജീകരണം
1.1 അൺപാക്കിംഗും പരിശോധനയും
Carefully unpack the temperature controller and inspect it for any signs of damage during transit. Ensure all components are present.
The packaging indicates models such as TC4S-24R and TC4S-14R, specifying "MULTI SENSOR" input, "MULTI RANGE" capability, "RELAY+SSR" output, and "100-240VAC" power supply.
1.2 മൗണ്ടിംഗ്
The controller is designed for panel mounting. Ensure adequate space for ventilation and wiring connections. Refer to the dimensions below for proper panel cutout and installation.
The diagram shows the controller with approximate dimensions: 48mm width, 48mm height (front panel), and 64.5mm depth.
- Ensure the mounting location is free from excessive vibration, dust, moisture, and corrosive gases.
- Maintain proper clearance around the unit for heat dissipation.
1.3 വയറിംഗ്
All wiring should be performed by a qualified electrician in accordance with local and national electrical codes. Ensure power is disconnected before making any connections.
- വൈദ്യുതി വിതരണം: Connect the power supply to the designated terminals. The unit operates on 100-240VAC.
- സെൻസർ ഇൻപുട്ട്: Connect your multi-sensor (e.g., thermocouple, RTD) to the sensor input terminals. Ensure correct polarity for thermocouples.
- നിയന്ത്രണ ഔട്ട്പുട്ട്: Connect your control device (e.g., heater, fan) to the Relay or SSR output terminals as required by your application.
- അലാറം ഔട്ട്പുട്ടുകൾ: If utilizing alarm functions, connect external alarm indicators or devices to the AL1 and AL2 output terminals.
Warning: Incorrect wiring can cause damage to the unit or connected equipment, and may pose a safety risk.
2. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Autonics Temperature Controller features a clear digital display and intuitive button controls for easy operation.
The display shows Process Value (PV) and Set Value (SV), along with indicators for temperature units (°F, °C), alarms (AL1, AL2), and output status (OUT). Control buttons include MODE, left arrow, down arrow, and up arrow.
2.1 പ്രദർശനം പൂർത്തിയായിview
- PV (Process Value): Displays the current measured temperature.
- SV (Set Value): ലക്ഷ്യ താപനില പ്രദർശിപ്പിക്കുന്നു.
- °F / °C Indicators: Show the selected temperature unit.
- AL1 / AL2 Indicators: Light up when respective alarm conditions are met.
- ഔട്ട് സൂചകം: Lights up when the control output is active.
2.2 ബട്ടൺ പ്രവർത്തനങ്ങൾ
- മോഡ് ബട്ടൺ: Used to cycle through different operating modes and parameter settings. Press and hold to enter setup menus.
- Up Arrow (▲) Button: Increases numerical values or scrolls through options.
- Down Arrow (▼) Button: Decreases numerical values or scrolls through options.
- Left Arrow (◀) Button: Moves the cursor during parameter setting or confirms selections.
2.3 Setting the Temperature (SV)
- In normal operating mode, the SV is typically displayed.
- Use the Up (▲) or Down (▼) buttons to adjust the Set Value to your desired temperature.
- The controller will automatically begin to regulate the temperature based on the new SV.
2.4 Accessing Parameter Settings
To access advanced settings such as alarm limits, control modes (PID, ON/OFF), or sensor type, press and hold the MODE button for several seconds until the display changes to a parameter menu. Use the arrow buttons to navigate and adjust settings, and the MODE button to confirm and move to the next parameter.
3. പരിപാലനം
Regular maintenance ensures the longevity and accuracy of your Autonics Temperature Controller.
3.1 വൃത്തിയാക്കൽ
- Wipe the front panel with a soft, dry cloth. For stubborn dirt, use a slightly damp മൃദുവായ ഡിറ്റർജൻ്റ് ഉള്ള തുണി.
- Do not use abrasive cleaners, solvents, or alcohol, as these can damage the display and casing.
- യൂണിറ്റിനുള്ളിൽ ദ്രാവകങ്ങൾ പ്രവേശിക്കുന്നില്ലെന്ന് ഉറപ്പാക്കുക.
3.2 കാലിബ്രേഷൻ
While the unit is factory calibrated, periodic checks against a known accurate temperature source are recommended for critical applications. If recalibration is necessary, refer to the detailed calibration procedures in the full technical manual (if available) or contact technical support.
3.3 സംഭരണം
If the unit is to be stored for an extended period, ensure it is kept in a dry, dust-free environment within the specified operating temperature and humidity ranges.
4. പ്രശ്നപരിഹാരം
This section addresses common issues you might encounter. For problems not listed here, contact technical support.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| പവർ/ഡിസ്പ്ലേ ഓഫല്ല | No power supply, incorrect wiring, blown fuse. | Check power connections (100-240VAC). Verify wiring. Check internal fuse (if accessible and user-serviceable). |
| തെറ്റായ താപനില വായന | Sensor not connected, incorrect sensor type selected, damaged sensor, sensor outside range. | Ensure sensor is properly connected. Verify sensor type setting in parameters. Replace damaged sensor. Check if temperature is within sensor's operating range. |
| Output (OUT) not activating | Set Value (SV) not reached, control mode incorrect, output wiring issue. | Check SV and PV values. Verify control mode (e.g., ON/OFF, PID). Inspect output wiring for continuity and correct connection to load. |
| Alarm (AL1/AL2) not triggering | Alarm limits incorrectly set, alarm output wiring issue. | Review and adjust alarm limit settings in parameters. Check wiring to external alarm devices. |
5 സ്പെസിഫിക്കേഷനുകൾ
Key technical specifications for the Autonics Temperature Sensor/Controller models:
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| ഉൽപ്പന്ന തരം | Temperature Sensor / Controller |
| ഔട്ട്പുട്ട് തരം | Digital Sensor (Control Output: Relay + SSR) |
| മെറ്റീരിയൽ | ലോഹം |
| വൈദ്യുതി വിതരണം | 100-240VAC |
| സെൻസർ ഇൻപുട്ട് | Multi Sensor (e.g., Thermocouple, RTD) |
| താപനില പരിധി | Multi Range (Configurable) |
| Dimensions (Front Panel) | ഏകദേശം 48 മിമി (പടിഞ്ഞാറ്) x 48 മിമി (ഉയരം) |
| ആഴം | ഏകദേശം 64.5 മി.മീ |
| ഉത്ഭവം | മെയിൻലാൻഡ് ചൈന |
6. വാറൻ്റിയും പിന്തുണയും
For warranty information, technical assistance, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase records handy for any support requests.
Seller: SZ AOYUE IC SHOP Store
7 ഉപയോക്തൃ നുറുങ്ങുകൾ
- This product is designed for accurate temperature measurements in various applications.
- The working principle relies on digital sensing for precise temperature detection.
- Always ensure the correct sensor type is selected in the controller's settings to match your connected temperature probe for optimal accuracy.
