Scimagic SMG-020A Multi-Frequency Rolling Code Compatible Remote Control User Manual

1. ആമുഖവും അവസാനവുംview

The Scimagic SMG-020A is a multi-frequency rolling code compatible remote control designed to replace and consolidate up to four different remote controls for various garage doors, gates, and barriers. This aftermarket remote offers 100% perfect fit and functionality comparable to your original remote, provided your original remote's brand is listed in the compatibility table. It features a robust design with a metal and PVC construction, including a non-slip design and a dust-proof sliding cover for enhanced durability and comfort.

2 സ്പെസിഫിക്കേഷനുകൾ

3. പാക്കേജ് ഉള്ളടക്കം

• 1 x Scimagic SMG-020A Remote Control
• 1 x കീ ചെയിൻ
• 1 x ഇംഗ്ലീഷ് മാനുവൽ
• 1 x CR2032 Battery (pre-installed or separate)

4. സജ്ജീകരണവും പ്രോഗ്രാമിംഗും

The SMG-020A remote control offers a unique and straightforward programming method. It can be programmed without the need for the original remote, making it an ideal replacement even if your original is lost.

4.1. Programming Demonstration Video

4.2. Step-by-Step Programming Instructions

1. Enter Remote Brand Selection Mode: Press and hold button 1 and button 4 on the SMG-020A remote control simultaneously. Continue holding until the LED light flashes quickly. Release both buttons.
2. Select Your Original Remote's Code: Refer to the 'Compatible List' below to find your original remote's brand and its corresponding code. For example, if your original remote is DITEC with code 1-3-3-3, you would press button 1, then button 3, then button 3, then button 3 on the SMG-020A. After entering the code, the LED on the SMG-020A will flash quickly.
3. Store the Code to a Button: Immediately after the LED flashes quickly (indicating the code is entered), press the specific button on the SMG-020A (e.g., button 1) that you wish to assign this brand's code to.
4. Repeat for Multiple Brands (Optional): You can repeat steps 1-3 for other buttons (2, 3, and 4) to store codes for up to four different remote brands. For example, you could store DOORHAN's code to button 2.
5. Activate (Program) the New Remote with Your Receiver:
   • സി തുറക്കുകasing of your receiver, typically located near your garage door or gate motor.
   • On the receiver circuit board, locate and press the programming button (often labeled 'Prog' or 'Learn'). Hold it until the LED light (e.g., L1) on the receiver illuminates.
   • Press the button on your new SMG-020A remote control that you just programmed (e.g., button 1). Release it. The LED light on the receiver should blink and then turn off, indicating successful programming.
   • Wait approximately 10 seconds for the programming to finalize. Your new remote control is now programmed and ready for use.
6. Emitting Seed Code (Remark): After selecting the brand, press and hold button 1 and button 2 at the same time until the LED flashes, then press button 1 to emit the seed code.
7. Hidden Button Function: To activate a hidden button function (if applicable for your original remote), press and hold button 1 and button 2 on the SMG-020A simultaneously until the LED light turns on. Then, press the button you stored the code to (e.g., button 1) to send the hidden button signal.

4.3. Compatible List

കുറിപ്പ്: Only compatible with the branded remote controls listed below. Please ensure your original remote control is in this list before attempting to program.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once successfully programmed, operating the Scimagic SMG-020A remote control is simple:

1. Ensure you are within the effective emission distance of 10-50 meters from your receiver.
2. Press the corresponding button on the SMG-020A remote that you have programmed for your specific garage door, gate, or barrier.
3. The LED light on the remote will illuminate briefly to indicate a signal is being transmitted.

6. പരിപാലനം

6.1. ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

The SMG-020A remote control uses a CR2032 coin cell battery. When the remote's range decreases or the LED light becomes dim, it's time to replace the battery. To replace:

1. റിമോട്ട് കൺട്രോൾ ശ്രദ്ധാപൂർവ്വം തുറക്കുക casing.
2. പഴയ CR2032 ബാറ്ററി നീക്കം ചെയ്യുക.
3. ശരിയായ പോളാരിറ്റി (+ സൈഡ് അപ്പ്) ഉറപ്പാക്കിക്കൊണ്ട് ഒരു പുതിയ CR2032 ബാറ്ററി ഇടുക.
4. റിമോട്ട് കൺട്രോൾ അടയ്ക്കുക casinഗ്രാം സുരക്ഷിതമായി.

6.2. ജനറൽ കെയർ

• Keep the remote control dry and away from moisture.
• Avoid exposing the remote to extreme temperatures (hot or cold).
• The dust-proof sliding cover helps protect the buttons from dirt and accidental presses. Keep it clean.
• റിമോട്ട് താഴെയിടുകയോ ശക്തമായ ആഘാതങ്ങൾക്ക് വിധേയമാക്കുകയോ ചെയ്യരുത്.

7. പ്രശ്‌നപരിഹാരം

• Remote not responding after programming:
  • Double-check all programming steps, especially the brand code entry and the receiver activation.
  • Ensure your original remote's brand is indeed on the compatibility list.
  • Verify that the battery is correctly installed and has sufficient charge.
• Poor operating range:
  • CR2032 ബാറ്ററി പുതിയൊരെണ്ണം ഉപയോഗിച്ച് മാറ്റിസ്ഥാപിക്കുക.
  • Ensure there are no significant obstructions between the remote and the receiver.
  • Avoid using the remote in areas with high radio frequency interference.
• LED on remote does not flash during programming:
  • Ensure buttons 1 and 4 are pressed simultaneously and held long enough until the LED flashes quickly.
  • ബാറ്ററി പരിശോധിക്കുക.

8 ഉപയോക്തൃ നുറുങ്ങുകൾ

• അനുയോജ്യത പരിശോധിക്കുക: Always check the compatibility list carefully to ensure your original remote's brand and frequency are supported by the SMG-020A before purchasing.
• Backup Remote: Since the SMG-020A can be programmed without the original remote, it's an excellent choice as a backup in case your primary remote is lost or damaged.
• Multiple Brands: അഡ്വാൻ എടുക്കുകtage of the 4-button design to consolidate up to four different rolling code remotes into one convenient device.
• ബാറ്ററി ലൈഫ്: Keep a spare CR2032 battery on hand to ensure uninterrupted operation.

9. വാറൻ്റിയും പിന്തുണയും

For specific warranty information, technical assistance, or further support regarding your Scimagic SMG-020A remote control, please refer to the documentation provided with your purchase or contact the seller directly. Keep your purchase receipt as proof of purchase for any warranty claims.