THINKCAR THINKOBD CR17 Auto Scanner User Manual

1. ആമുഖം

The THINKCAR THINKOBD CR17 is a professional car diagnostic tool designed for car owners, DIY enthusiasts, and auto mechanics. This device provides full OBDII functionality, allowing for easy diagnosis and resolution of vehicle issues. It is equipped to read and clear Diagnostic Trouble Codes (DTCs), view live data, perform I/M readiness tests, and much more, helping you maintain your vehicle's health and pass emission tests smoothly.

Image: THINKOBD CR17 device displaying its main menu (Diagnose, DTC Lookup, Setup, Help) and highlighting key features like Full OBDII Functions, SMOG TEST, and the ability to Turn off the Malfunction Indicator Light (MIL).

2. What is OBDII?

OBDII (On-Board Diagnostics II) is a standardized system in vehicles that monitors the performance of the engine's major components. It provides a universal connector and a set of diagnostic trouble codes (DTCs) that allow technicians and car owners to access information about the vehicle's health. The THINKOBD CR17 utilizes this system to help you understand and address issues indicated by your vehicle's computer.

3. പ്രധാന സവിശേഷതകളും പ്രവർത്തനങ്ങളും

The THINKOBD CR17 offers a comprehensive suite of OBDII functions:

• കോഡുകൾ വായിക്കുക: Retrieve extensive current, pending, and permanent Diagnostic Trouble Codes (DTCs) from the OBD system.
• കോഡുകൾ മായ്‌ക്കുക: Erase detected fault codes and turn off the Check Engine Light (MIL) efficiently.
• തത്സമയ ഡാറ്റ സ്ട്രീം: View graphical real-time PID data from the Engine Control Unit (ECU) for easy analysis of vehicle operating parameters.
• ഫ്രീസ് ഫ്രെയിം ഡാറ്റ: Capture a snapshot of the vehicle's operating conditions at the exact moment a DTC is detected, helping to pinpoint the problem.
• ഐ/എം സന്നദ്ധത നില: Check the readiness of the monitoring system to determine if the vehicle is ready for an emissions inspection.
• O2 സെൻസർ ടെസ്റ്റ്: Perform O2 sensor tests to check fuel efficiency and vehicle emissions.
• ഓൺ-ബോർഡ് മോണിറ്റർ ടെസ്റ്റ്: Read the results of on-board diagnostic monitoring tests for specific components/systems, useful after servicing or clearing memory.
• EVAP സിസ്റ്റം ടെസ്റ്റ് (മോഡ് $08): Initiate a leak test for the vehicle's evaporative emission control system to prevent fuel evaporation and reduce smog.
• DTC ലുക്ക്അപ്പ്: Access a built-in library with descriptions for every diagnostic trouble code, aiding in efficient vehicle diagnostics and repair.
• വാഹന വിവരം: Retrieve complete vehicle information including VIN (Vehicle Identification Number), CINs (Calibration Identification Numbers), and CVNs (Calibration Verification Numbers).

Image: The THINKOBD CR17 device showing a detailed menu of its full OBDII functions, including Read Codes, Clear Codes, Live Data, EVAP Test, Freeze Frame, I/M Readiness, O2 Sensor Test, On-Board Monitor Test, VIN, DTC Code Lookup, Smog Check, and MIL Fault Indicator Light.

4. Vehicle Compatibility and Supported Languages

4.1 വാഹന അനുയോജ്യത

The THINKOBD CR17 is compatible with most vehicles that support standard OBDII protocols. This includes:

• അമേരിക്കൻ കാറുകൾ: Models manufactured from 1996 onwards (e.g., Chrysler, Ford, GM, Jeep, Lincoln, Buick, Cadillac, Chevrolet, Dodge, HM).
• യൂറോപ്യൻ കാറുകൾ: Models manufactured from 2000 onwards (e.g., Mercedes Benz, Smart, Sprinter, BMW, Volkswagen, Skoda, Audi, Opel, Lamborghini, Porsche, Maybach, Ford, Land Rover, Jaguar, Aston Martin, Bentley, Rolls-Royce, Rover, Mini, Vauxhall, DR, Ferrari, Fiat, Abarth, Lancia, Alfa Romeo, Maserati, Bugatti, Saab, Volvo, GM, GMSA, Dacia, Seat).
• Asian Cars: Models manufactured from 2008 onwards (e.g., Thailand Isuzu, Acura, Daewoo, Infiniti, Proton, Honda, Mazda, Mahindra, Isuzu, Suzuki, Toyota, Nissan, Kia, Daihatsu, Lexus, Mitsubishi, Hyundai).

പ്രധാന കുറിപ്പ്:

• The device is NOT compatible with Citroen, Peugeot, Renault, and Ssangyong vehicles.
• Japanese cars compatible with JOBD protocol are NOT supported.
• Ensure your car has a 16-pin OBD2 connector. This device primarily checks your car's engine system.

Image: The THINKCAR THINKOBD CR17 device held in a car, with the dashboard visible. The image highlights that the device supports all OBDII modes and lists various functions like Read/Clear Codes, Live Data, Smog Check, Freeze Frame, O2 Sensor Test, EVAP, DTC Code Lookup, I/M Readiness, and VIN.

4.2 പിന്തുണയ്ക്കുന്ന പ്രോട്ടോക്കോളുകൾ

The THINKOBD CR17 supports the following OBDII protocols:

• KWP2000
• ISO9141
• J1850 VPW
• J1850 PWM
• CAN (കൺട്രോളർ ഏരിയ നെറ്റ്‌വർക്ക്)

4.3 പിന്തുണയ്ക്കുന്ന ഭാഷകൾ

The device supports the following 8 languages:

• ഇംഗ്ലീഷ്
• പോർച്ചുഗീസ്
• റഷ്യൻ
• ഇറ്റാലിയൻ
• സ്പാനിഷ്
• ഫ്രഞ്ച്
• പോളിഷ്
• ജർമ്മൻ

Image: Icons visually representing the supported languages: English, French, Spanish, German, Russian, Italian, Portuguese, and Polish.

5. സജ്ജീകരണവും കണക്ഷനും

The THINKOBD CR17 is designed for simple plug-and-play operation. No batteries or complex setup procedures are required as it draws power directly from your vehicle's OBDII port.

5.1 ഉപകരണം ബന്ധിപ്പിക്കുന്നു

1. Locate your vehicle's 16-pin OBDII diagnostic port. This port is usually found under the dashboard on the driver's side, but its exact location can vary by vehicle model. Refer to your vehicle's owner's manual if you have trouble finding it.
2. നിങ്ങളുടെ വാഹനത്തിന്റെ ഇഗ്നിഷൻ ഓഫ് പൊസിഷനിൽ ആണെന്ന് ഉറപ്പാക്കുക.
3. Firmly plug the THINKOBD CR17's OBDII connector into your vehicle's diagnostic port.
4. Turn your vehicle's ignition to the ON position (do not start the engine unless instructed by a specific diagnostic procedure). The device will power on automatically.

Image: Two detailed shots demonstrating the strong and long cable of the THINKOBD CR17. One shows a hand connecting the OBDII connector to a car's diagnostic port, and the other shows a hand holding the flexible cable, emphasizing its durability.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once connected, the THINKOBD CR17 will display its main menu. Use the navigation buttons (Up, Down, Left, Right, OK, Back) to select desired functions.

6.1 കോഡുകൾ വായിക്കുക

This function allows you to read current, pending, and permanent DTCs stored in the vehicle's ECU. These codes indicate specific issues detected by the vehicle's diagnostic system.

1. From the main menu, select "Diagnose" then "Read Codes".
2. The scanner will display any detected DTCs.
3. Note down the codes for further investigation or use the DTC Lookup function.

6.2 Clear Codes / Reset Check Engine Light (MIL)

After addressing a vehicle issue, use this function to clear the stored DTCs and turn off the Check Engine Light.

1. From the main menu, select "Diagnose" then "Clear Codes".
2. ആവശ്യപ്പെടുമ്പോൾ പ്രവർത്തനം സ്ഥിരീകരിക്കുക.
3. The Check Engine Light should turn off. If the underlying issue is not resolved, the light may reappear.

Image: This image illustrates the process of resetting the Check Engine Light (MIL). The top part shows the THINKOBD CR17 connected to a car's engine bay, while the bottom part displays a car dashboard with the check engine light illuminated, followed by the same dashboard with the light turned off, indicating a successful reset.

6.3 ലൈവ് ഡാറ്റ സ്ട്രീം

Monitor real-time operating parameters of your vehicle's engine. This data can be displayed graphically for easier analysis.

1. From the main menu, select "Diagnose" then "Live Data".
2. Choose the specific parameters you wish to monitor.
3. Observe the real-time values, which can help diagnose intermittent problems or verify repairs.

Image: The THINKOBD CR17 device displaying various diagnostic screens. It shows "SIMPLE PLUG AND PLAY" functionality, a graphical representation of "LIVE DATA" (O2S14 and SHRTFT14 values), a "DTC Lookup" input field (P0000), detailed "Rich to lean sensor" data, and "I/M Readiness" status for different monitors.

6.4 Freeze Frame Data

When an emission-related fault occurs, the ECU stores certain vehicle parameters. This data provides valuable context for diagnosing the fault.

1. From the main menu, select "Diagnose" then "Freeze Frame".
2. The scanner will display the recorded parameters at the time the fault occurred.

6.5 I/M സന്നദ്ധത നില

This function indicates whether the various emission-related systems on the vehicle are operating correctly and have completed their diagnostic tests.

1. From the main menu, select "Diagnose" then "I/M Readiness".
2. The display will show the status of each monitor (e.g., OK, INC - Incomplete, N/A - Not Applicable).
3. This is crucial for determining if your vehicle is ready for an emissions test.

6.6 O2 സെൻസർ ടെസ്റ്റ്

Retrieve the results of the oxygen sensor monitor tests from the vehicle's on-board computer. This helps in diagnosing issues related to fuel mixture and emissions.

1. From the main menu, select "Diagnose" then "O2 Sensor Test".
2. Review the test results to assess O2 sensor performance.

6.7 ഓൺ-ബോർഡ് മോണിറ്റർ ടെസ്റ്റ്

ഈ പ്രവർത്തനം നിങ്ങളെ അനുവദിക്കുന്നു view the results of on-board diagnostic monitoring tests for specific components/systems that are not continuously monitored.

1. From the main menu, select "Diagnose" then "On-Board Monitor".
2. Examine the results, which are particularly useful after repairs or clearing the ECU memory.

Image: The THINKOBD CR17 device displaying diagnostic results for I/M Readiness status, O2 Sensor Test, and On-Board Monitor Test, indicating the vehicle's emission system health.

6.8 EVAP System Test (Mode $08)

Perform a leak test of the Evaporative Emission Control System to check for fuel vapor leaks.

1. From the main menu, select "Diagnose" then "EVAP Test".
2. Follow the on-screen prompts to initiate and complete the test.
3. This allows you to verify repairs related to the EVAP system without waiting for the vehicle to run the test automatically.

6.9 ഡിടിസി ലുക്കപ്പ്

Access the built-in DTC library to get detailed descriptions of diagnostic trouble codes.

1. പ്രധാന മെനുവിൽ നിന്ന്, "DTC ലുക്കപ്പ്" തിരഞ്ഞെടുക്കുക.
2. Enter the DTC (e.g., P0000) using the navigation buttons.
3. Press "OK" to view the detailed definition of the code.

Image: The THINKOBD CR17 screen displaying the DTC Lookup function. It shows an input field for a diagnostic trouble code (P0000) and provides a detailed textual description of the selected code, aiding in understanding vehicle faults.

6.10 വാഹന വിവരങ്ങൾ

Retrieve essential vehicle identification details.

1. From the main menu, select "Diagnose" then "Vehicle Info".
2. The device will display the VIN, CINs, and CVNs of the test vehicle.

7. പരിപാലനവും പരിചരണവും

• വൃത്തിയാക്കൽ: ഉപകരണം വൃത്തിയാക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക. അബ്രസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
• സംഭരണം: Store the device in a clean, dry environment away from extreme temperatures, direct sunlight, and excessive moisture.
• കേബിൾ കെയർ: Avoid bending or twisting the cable excessively. Ensure the OBDII connector is handled carefully to prevent damage to the pins.
• സോഫ്റ്റ്‌വെയർ അപ്‌ഡേറ്റുകൾ: Check the official THINKCAR website periodically for any available software updates to ensure optimal performance and compatibility.

8. പ്രശ്‌നപരിഹാരം

8.1 ഉപകരണം ഓണാകുന്നില്ല

• Ensure the OBDII connector is firmly plugged into the vehicle's diagnostic port.
• Verify that the vehicle's ignition is in the ON position.
• Check your vehicle's fuse box for any blown fuses related to the OBDII port.

8.2 Communication Error with Vehicle

• Confirm that your vehicle is OBDII compliant (most US vehicles 1996+, EU vehicles 2000+, Asian vehicles 2008+).
• വാഹനത്തിന്റെ ഇഗ്നിഷൻ ഓണാണെന്ന് ഉറപ്പാക്കുക.
• OBDII പോർട്ടിൽ ഏതെങ്കിലും അയഞ്ഞ കണക്ഷനുകൾ ഉണ്ടോയെന്ന് പരിശോധിക്കുക.
• Try the device on another compatible vehicle to rule out a device issue.

8.3 Check Engine Light Remains On After Clearing Codes

• Clearing codes only turns off the light; it does not fix the underlying problem. The light will reappear if the fault is still present.
• Perform a thorough diagnosis using the scanner's functions (Live Data, Freeze Frame, etc.) to identify and repair the root cause of the issue.

9 സ്പെസിഫിക്കേഷനുകൾ

10 ഉപയോക്തൃ നുറുങ്ങുകൾ

• ഗുണമേന്മ: The THINKCAR THINKOBD CR17 is a product from THINKCAR, a brand recognized for its quality. It also holds CE certification, ensuring it meets high safety and quality standards.
• സുരക്ഷ ആദ്യം: Always ensure your vehicle is safely parked with the ignition off before connecting or disconnecting the scanner.
• പതിവ് പരിശോധനകൾ: Use the I/M Readiness function regularly, especially before scheduled emissions tests, to ensure your vehicle is compliant.
• Understand DTCs: Don't just clear codes. Use the DTC Lookup feature to understand what each code means and address the underlying issue to prevent recurrence.

11. പിന്തുണയും സമ്പർക്കവും

For any technical assistance, warranty inquiries, or support, please contact the seller or the official THINKCAR customer service. Refer to your purchase documentation for specific contact details.

പാക്കേജ് ഉള്ളടക്കം:

• 1 x THINKOBD CR17 Main Unit
• 1 x ദ്രുത ആരംഭ ഗൈഡ്

Image: The contents of the THINKOBD CR17 package, showing the main diagnostic unit and the Quick Start Guide.