SK CUSTOM Throttle Body Spacer Instruction Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The SK CUSTOM Throttle Body Spacer is an aftermarket component designed to optimize engine performance by enhancing air intake characteristics. It features a unique eddy design that creates turbulence in the intake manifold, leading to improved air/fuel mixture and increased off-idle torque.

പ്രധാന സവിശേഷതകൾ:

• Unique Eddy Design: Creates air turbulence for superior air/fuel mixture.
• Enhanced Torque: Designed to boost off-idle torque from 800 rpm to approximately 3,000 rpm.
• Improved Throttle Response: Contributes to a more responsive engine feel.
• നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Precision CNC machined from Aircraft Grade 6061-T6 billet aluminum.
• Integrated Silicon Seal: Provides strong sealing properties, resistant to high temperatures and corrosion.
• High-Strength Bolts: Includes 304 Stainless steel bolts for corrosion resistance and secure application.

2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

This section provides general guidelines for installing the Throttle Body Spacer. Professional installation is recommended if you are unfamiliar with automotive engine modifications.

ആവശ്യമായ ഉപകരണങ്ങൾ:

• സോക്കറ്റ് റെഞ്ച് സെറ്റ്
• ടോർക്ക് റെഞ്ച്
• Screwdrivers (various types)
• Gasket scraper or cleaning tool
• വൃത്തിയുള്ള തുണിക്കഷണങ്ങൾ
• സുരക്ഷാ ഗ്ലാസുകളും കയ്യുറകളും

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:

1. സുരക്ഷ ആദ്യം: Ensure the engine is cool. Disconnect the negative terminal of the vehicle's battery to prevent electrical hazards.
2. Access Throttle Body: Locate the throttle body on your engine. This typically involves removing air intake components (e.g., air box, intake tube).
3. Remove Throttle Body: Carefully disconnect any electrical connectors and vacuum lines attached to the throttle body. Unbolt the throttle body from the intake manifold.
4. വൃത്തിയുള്ള പ്രതലങ്ങൾ: Thoroughly clean both the intake manifold and throttle body mating surfaces to ensure a proper seal. Remove any old gasket material or debris.
5. Install Spacer: Place the SK CUSTOM Throttle Body Spacer between the intake manifold and the throttle body. Ensure the integrated silicon seal is correctly seated. The spacer is designed to fit 'after the throttle body'.
6. Reinstall Throttle Body: Position the throttle body onto the spacer. Use the provided longer 304 Stainless steel bolts and washers to secure the assembly. Tighten bolts evenly in a criss-cross pattern to the manufacturer's recommended torque specifications for your vehicle's throttle body (refer to your vehicle's service manual).
7. ഘടകങ്ങൾ വീണ്ടും ബന്ധിപ്പിക്കുക: Reattach all electrical connectors and vacuum lines to the throttle body. Reinstall any air intake components removed in step 2.
8. ബാറ്ററി വീണ്ടും ബന്ധിപ്പിക്കുക: വാഹന ബാറ്ററിയുടെ നെഗറ്റീവ് ടെർമിനൽ വീണ്ടും ബന്ധിപ്പിക്കുക.
9. ടെസ്റ്റ്: Start the engine and check for any air leaks around the throttle body and spacer assembly. Listen for unusual noises and observe engine idle.

3. പ്രവർത്തന തത്വങ്ങൾ

Once installed, the Throttle Body Spacer works by modifying the airflow into the engine's intake manifold. Its spiral (eddy) design induces a swirling motion in the incoming air charge. This turbulence helps to:

• Increase the velocity of the air entering the combustion chamber.
• Improve the atomization and mixing of fuel with air, leading to a more complete combustion.
• Enhance off-idle torque, particularly in the 800-3,000 RPM range.
• Contribute to better throttle response and potentially higher explosive horsepower output, especially when combined with other intake or exhaust modifications.

4. പരിപാലനം

The SK CUSTOM Throttle Body Spacer is a durable component designed for long-term performance with minimal maintenance. However, periodic checks are recommended:

• ബോൾട്ട് ഇറുകിയത: Every 12,000 miles or during routine engine inspections, check the tightness of the mounting bolts. Ensure they are torqued to the vehicle manufacturer's specifications to prevent air leaks.
• മുദ്ര പരിശോധന: Visually inspect the integrated silicon seal for any signs of wear, cracking, or damage. While highly durable, extreme conditions could potentially affect its integrity over time.
• വൃത്തിയാക്കൽ: If the throttle body or intake manifold requires cleaning due to carbon buildup, the spacer can be removed and cleaned with appropriate automotive cleaning agents. Ensure all surfaces are dry before reinstallation.

5. പ്രശ്‌നപരിഹാരം

If you experience issues after installing the throttle body spacer, consider the following troubleshooting steps:

6 സ്പെസിഫിക്കേഷനുകൾ

7 ഉപയോക്തൃ നുറുങ്ങുകൾ

• Always ensure all mating surfaces are perfectly clean and free of old gasket material or debris before installing the spacer to prevent vacuum leaks.
• Use a torque wrench to tighten the bolts to your vehicle's specific throttle body torque specifications. Overtightening can damage components, while undertightening can lead to leaks.
• After installation, perform a thorough check for any air leaks by listening for hissing sounds or using a smoke test if available.
• For optimal performance and safety, if you are not confident in performing the installation yourself, consider having it done by a qualified mechanic.

8. വാറൻ്റിയും പിന്തുണയും

For any questions regarding installation, operation, or product defects, please contact the seller directly through the platform where the product was purchased. Please provide your order number and a detailed description of the issue for prompt assistance.