ഉൽപ്പന്നം കഴിഞ്ഞുview
The KW-TRIO 99H5 series heavy-duty punch is designed for loose-leaf binders and journals, offering versatile punching capabilities. It supports 20, 26, and 30-hole binding, and can punch up to 10 sheets of A4 paper simultaneously. Its patented ruler design ensures precise positioning, while the all-metal body and independent metal cutter heads provide durability and efficient performance. The punch also features a convenient paper scrap collection tray and an effort-saving blade design.
Figure 1: KW-triO 99H5 10-Hole Paper Punch
സജ്ജമാക്കുക
- അൺബോക്സിംഗ്: Carefully remove the paper punch from its packaging. Inspect for any damage.
- Familiarize with Parts: Identify the main body, the punching mechanism, the positioning ruler, and the paper scrap collection tray.
- Ruler Installation: The positioning ruler is detachable. Ensure it is securely inserted into its slot until it clicks into place. This ruler is crucial for accurate paper alignment.
- Safety Buckle: The punch features an upper cover storage structure with a safety buckle. To open, press the upper cover safety buckle with your left hand and press the upper cover of the punch with your thumb until it is fully released. To close, push the safety buckle with your right hand and gently lift the left side of the upper cover. When you use it again, the safety buckle will pop up automatically.
Figure 2: Safety Buckle and Bottom Pad
Figure 3: Ruler Installation
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
General Punching
- Prepare Paper: Gather up to 10 sheets of A4 paper. Ensure the edges are neat and aligned.
- സ്ഥാനനിർണ്ണയം: Slide the paper into the punch, aligning the edge with the positioning ruler. The ruler has markings for A4, B5, and A5 paper sizes.
- പഞ്ചിംഗ്: Press down firmly and evenly on the punch handle until the holes are created.
- പേപ്പർ നീക്കം ചെയ്യുക: Release the handle and carefully remove the punched paper.
Adjusting for Multiple Hole Configurations (20, 26, 30 Holes)
The KW-triO 99H5 is designed to create 10 holes at a time. To achieve 20, 26, or 30 holes, you will need to perform multiple punches, repositioning the paper using the built-in ruler and positioning columns.
Video 1: Demonstration of the KW-triO 10-Hole Paper Punch, showing its multi-hole capability and A4 punching method.
- For 30-hole A4 Paper:
1. Align the paper with the ruler and punch the first 10 holes.
2. Count out the third hole from the punched holes and align it with the positioning column. Punch again.
3. Repeat step 2 for the third set of 10 holes. This results in 10 + 10 + 10 = 30 holes. - For 26-hole B5 Paper:
1. Align the paper with the ruler and punch the first 10 holes.
2. Count out the third hole from the punched holes and align it with the positioning column. Punch again.
3. For the remaining 6 holes, adjust the paper to align the appropriate section with the punch. This results in 10 + 10 + 6 = 26 holes. - For 20-hole A5 Paper:
1. Align the paper with the ruler and punch the first 10 holes.
2. Count out the third hole from the punched holes and align it with the positioning column. Punch again. This results in 10 + 10 = 20 holes.
Figure 4: Punching Procedures for Different Hole Counts
Using the Positioning Ruler
The ruler attached to the punch has clear markings for A4, B5, and A5 paper sizes. Use these markings and the red positioning limit indicators to ensure your paper is correctly aligned for consistent hole placement, especially when performing multiple punches for higher hole counts.
Figure 5: Positioning Ruler in Use
മെയിൻ്റനൻസ്
- Empty Paper Scraps: The solid plastic bottom pad serves as a collection tray for paper scraps. Regularly slide out and empty this tray to prevent accumulation, which can affect punching performance.
- വൃത്തിയാക്കൽ: Wipe the exterior of the punch with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- ബ്ലേഡ് കെയർ: The independent metal cutter heads are designed for durability. To maintain sharpness and prevent rust, ensure the punch is stored in a dry environment. Avoid punching materials thicker than 10 sheets of standard A4 paper or non-paper materials.
ട്രബിൾഷൂട്ടിംഗ്
- പേപ്പർ ജാമുകൾ: If paper gets stuck, gently pull it out. Do not force the handle. Ensure you are not exceeding the 10-sheet capacity.
- Incomplete Holes: This can be caused by punching too many sheets at once or insufficient pressure. Reduce the number of sheets or apply more firm, even pressure. Ensure the paper scrap tray is not overflowing.
- തെറ്റായി ക്രമീകരിച്ച ദ്വാരങ്ങൾ: Double-check that the paper is correctly aligned with the positioning ruler and the appropriate positioning columns are used for multi-hole punching.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | KW-TRIO |
| മോഡൽ നമ്പർ | 99H5 |
| ടൈപ്പ് ചെയ്യുക | Standard Punch |
| പഞ്ച് കപ്പാസിറ്റി | Up to 10 sheets of A4 paper (80gsm) |
| ഹോൾ കോൺഫിഗറേഷനുകൾ | 10-hole (default), adaptable for 20, 26, 30 holes |
| മെറ്റീരിയൽ | All-metal body, independent casting metal cutter head |
| ഫീച്ചറുകൾ | Patented ruler design, positioning scales, solid plastic bottom pad for scrap collection, effort-saving blade design |
| അളവുകൾ (L x W x H) | 16 സെ.മീ x 9.5 സെ.മീ x 10 സെ.മീ (ഏകദേശം) |
| ഭാരം | 0.58 കിലോ (ഏകദേശം) |
ഉപയോക്തൃ ടിപ്പുകൾ
- Consistent Alignment: Always use the positioning ruler and columns to ensure perfectly aligned holes, especially when punching multiple sets of holes for larger documents.
- Don't Overload: Stick to the recommended maximum of 10 sheets to prevent paper jams and ensure clean punches.
- Regular Emptying: Make it a habit to empty the paper scrap tray after each use or when it's visibly full to maintain optimal performance and a tidy workspace.
- Binding Strips: For binding, remember that binding strips and opening/closing devices are typically sold separately.
Figure 6: Binding Strip Operation (Binding strip sold separately)
വാറൻ്റിയും പിന്തുണയും
വാറന്റി വിവരങ്ങൾ, സാങ്കേതിക പിന്തുണ, അല്ലെങ്കിൽ ഉൽപ്പന്നവുമായി ബന്ധപ്പെട്ട ഏതെങ്കിലും അന്വേഷണങ്ങൾ എന്നിവയ്ക്ക്, ദയവായി വിൽപ്പനക്കാരനെയോ നിർമ്മാതാവിനെയോ നേരിട്ട് ബന്ധപ്പെടുക. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.
