ഓകിൻ മോഡൽ RF.27.19.02 റിമോട്ട് ഹാൻഡ് കൺട്രോൾ ഹാൻഡ്‌സെറ്റ് ഇൻസ്ട്രക്ഷൻ മാനുവൽ

ആമുഖം

This manual provides detailed instructions for the Okin Model RF.27.19.02 Remote Hand Control Handset. This remote is designed as a direct replacement for compatible GhostBed adjustable beds. Please read this manual thoroughly before setup and operation to ensure correct usage and to maximize the lifespan of your device. This remote is specifically for GhostBed adjustable beds and is not compatible with other brands.

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

1. റിമോട്ട് കൺട്രോളിന്റെ പിൻഭാഗത്ത് ബാറ്ററി കമ്പാർട്ട്മെന്റ് കണ്ടെത്തുക.
2. ബാറ്ററി കവർ തുറക്കാൻ താഴേക്ക് സ്ലൈഡ് ചെയ്യുക.
3. Insert two (2) AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment. Batteries are not included and must be purchased separately.
4. സുരക്ഷിതമായി ക്ലിക്ക് ചെയ്യുന്നതുവരെ ബാറ്ററി കവർ തിരികെ സ്ഥാനത്തേക്ക് സ്ലൈഡുചെയ്‌ത് മാറ്റിസ്ഥാപിക്കുക.

2. റിമോട്ട് കൺട്രോൾ ജോടിയാക്കുന്നു

To ensure proper communication with your adjustable bed, the remote control may need to be paired. The exact pairing procedure can vary slightly depending on your specific GhostBed adjustable bed model. Generally, the steps involve:

1. Ensure the adjustable bed is plugged into a working power outlet.
2. Locate the control box under your adjustable bed. There is usually a small button on the control box, often labeled "PAIR" or "LEARN".
3. Press and hold the "PAIR" or "LEARN" button on the control box for a few seconds until an indicator light (if present) starts flashing.
4. Within 10 seconds, press and hold the "PAIR" button on your Okin RF.27.19.02 remote control (located at the top right of the remote, next to the lock icon).
5. Release the button on the remote when the indicator light on the control box stops flashing or when the bed responds to a command.
6. Test the remote's functions to confirm successful pairing.

If pairing is unsuccessful, repeat the steps. If issues persist, consult your GhostBed adjustable bed's original manual for specific pairing instructions or contact GhostBed customer support.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Familiarize yourself with the buttons on your Okin RF.27.19.02 remote control. A visual guide is provided below:

ബട്ടൺ പ്രവർത്തനങ്ങൾ:

• ലോക്ക്/അൺലോക്ക്: Locks or unlocks the remote to prevent accidental adjustments.
• പേയർ: Used for pairing the remote with the adjustable bed's control box (refer to Setup Instructions).
• എം (മെമ്മറി): Saves or recalls a custom bed position. Consult your bed's manual for specific memory programming steps.
• ZG (Zero Gravity): Adjusts the bed to the Zero Gravity position, which elevates the head and feet to promote circulation and relieve pressure.
• ടിവി: Adjusts the bed to a comfortable position for watching TV.
• തല മുകളിലേക്കും താഴേക്കും: Raises or lowers the head section of the bed.
• കാൽ മുകളിലേക്കും താഴേക്കും: Raises or lowers the foot section of the bed.
• ഫ്ലാറ്റ്: കിടക്ക പൂർണ്ണമായും പരന്ന സ്ഥാനത്തേക്ക് തിരികെ കൊണ്ടുവരുന്നു.
• MASSAGE (10min, 20min, 30min): Activates the massage function for the selected duration.
• MASSAGE (Head, Foot): Controls the massage intensity or pattern for the head or foot section.
• MASSAGE (MODE): Cycles through different massage modes or patterns.
• ഓൺ/ഓഫ്: Powers the massage function on or off.
• ടൈമർ: Sets a timer for the massage function.

Press and hold the desired adjustment buttons until the bed reaches your preferred position. Release the button to stop movement.

മെയിൻ്റനൻസ്

ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

When the remote's performance degrades or the indicator light (if any) signals low battery, replace the AAA batteries. Follow the battery installation steps in the "Setup Instructions" section.

വൃത്തിയാക്കൽ

Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners, aerosols, or harsh chemicals, as these can damage the remote's electronics or finish.

സംഭരണം

Store the remote in a dry place away from extreme temperatures and direct sunlight. If storing for an extended period, it is recommended to remove the batteries to prevent leakage.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

ഉപയോക്തൃ ടിപ്പുകൾ

• Always verify the model number (RF.27.19.02) on your existing remote or bed's control box before purchasing a replacement to ensure compatibility.
• Keep a spare set of AAA batteries on hand to avoid interruptions in bed operation.
• If your bed has a "Flat" button on the base or control box, you can use it as an alternative to the remote if the remote is lost or not functioning.
• For optimal signal, ensure there are no large metal objects or other electronics directly between the remote and the bed's control box.

വാറൻ്റിയും പിന്തുണയും

For specific warranty information regarding your Okin Model RF.27.19.02 Remote Hand Control Handset, please refer to the documentation provided at the time of purchase or contact the seller directly. Warranty terms may vary.

If you encounter issues that cannot be resolved using the troubleshooting guide, or if you require further assistance, please contact the retailer from whom you purchased this product. For issues related to your GhostBed adjustable bed itself, please contact GhostBed customer support.