ആമുഖം
Thank you for choosing the Nakamichi NQ537BD Auto Radio. This manual provides essential information for the proper installation, operation, and maintenance of your new car audio system. The NQ537BD is designed to enhance your driving experience with high-quality sound and versatile playback options, including Bluetooth, MP3, USB, and FM radio. Please read this manual thoroughly before use to ensure optimal performance and safety.
സുരക്ഷാ വിവരങ്ങൾ
- Always operate the vehicle safely. Do not perform any operations that may distract you from driving.
- Ensure proper wiring and connections to prevent damage to the unit or vehicle.
- ഏതെങ്കിലും ഘട്ടങ്ങളെക്കുറിച്ച് നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ, ഇൻസ്റ്റാളേഷനായി ഒരു പ്രൊഫഷണലിനെ സമീപിക്കുക.
- പുറത്തെ ഗതാഗത ശബ്ദങ്ങൾ കേൾക്കാൻ കഴിയുന്ന തരത്തിൽ വോളിയം നിലനിർത്തുക.
പാക്കേജ് ഉള്ളടക്കം
പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടോ എന്ന് ദയവായി പരിശോധിക്കുക:
- Nakamichi NQ537BD Main Unit
- വയറിംഗ് ഹാർനെസ്
- USB വിപുലീകരണ കേബിൾ
- റിമോട്ട് കൺട്രോൾ
- ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
- മൗണ്ടിംഗ് ഹാർഡ്വെയർ (സ്ക്രൂകൾ, ബ്രാക്കറ്റുകൾ)
സജ്ജമാക്കുക
യൂണിറ്റ് ഓവർview
Familiarize yourself with the main unit's components:

Figure 1: Front Panel of NQ537BD Auto Radio

ചിത്രം 2: വശം View of NQ537BD Auto Radio

Figure 3: Rear Panel of NQ537BD Auto Radio with Connectors
വയറിംഗും ഇൻസ്റ്റാളേഷനും
Proper wiring is crucial for the functionality and safety of your car stereo. Refer to the wiring harness diagram and the rear panel connections.

Figure 4: Main Wiring Harness
Standard Wiring Connections:
- Yellow (Constant 12V): Connect to a constant 12V power source (battery) for memory retention.
- Red (Accessory 12V): Connect to a switched 12V power source (ignition) that turns on/off with the car.
- കറുപ്പ് (നിലം): Connect to a clean chassis ground point in the vehicle.
- Blue (Power Antenna/Remote Turn-On): Connect to the remote turn-on lead of an external ampലിഫയർ അല്ലെങ്കിൽ പവർ ആന്റിന.
- സ്പീക്കർ വയറുകൾ: Connect the color-coded speaker wires to their respective positive (+) and negative (-) terminals of your car's speakers. (e.g., White/White-Black for Front Left, Gray/Gray-Black for Front Right, Green/Green-Black for Rear Left, Purple/Purple-Black for Rear Right).
- RCA Pre-outputs: ബാഹ്യമായി ബന്ധിപ്പിക്കുക amplifiers for front, rear, and subwoofer channels. The NQ537BD features 7CH x 4V pre-outputs.
- ആന്റിന ഇൻപുട്ട്: Connect your car's FM/AM antenna.
- യുഎസ്ബി ഇൻപുട്ട്: Use the provided USB extension cable (Figure 5) to connect USB devices for media playback or charging.
- മൈക്രോഫോൺ ഇൻപുട്ട്: Connect an external microphone if desired (the unit also has a built-in microphone).
- SWI (Steering Wheel Interface): Connect to a compatible steering wheel control adapter (CAP™-SWI) for remote control via your vehicle's steering wheel buttons.

Figure 5: USB Extension Cable
Warning: Incorrect wiring can cause severe damage to the unit or vehicle's electrical system. If you are not confident in performing the installation, please seek professional assistance.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Basic Controls (Front Panel & Remote)

ചിത്രം 6: റിമോട്ട് കൺട്രോൾ
- Power Button (IR / U on remote): യൂണിറ്റ് ഓൺ / ഓഫ് ചെയ്യുന്നതിന് അമർത്തുക.
- Volume Knob (Vol): വോളിയം നില ക്രമീകരിക്കാൻ തിരിക്കുക.
- മോഡ് ബട്ടൺ (മോഡ്): Press to cycle through available sources (FM, Bluetooth, USB, TF).
- Menu Button (Menu): Press to access audio settings and other system options.
- SRC Button (SRC on remote): ഓഡിയോ ഉറവിടം തിരഞ്ഞെടുക്കുന്നു.
- Band Button (BAND): In FM mode, cycles through FM bands (FM1, FM2, FM3).
- RST (പുനഃസജ്ജമാക്കുക): A small button, usually recessed, to reset the unit to factory defaults. Use a pointed object to press.
- Track Control (|< / >> |): Skips tracks or navigates radio presets.
- പ്ലേ/താൽക്കാലികമായി നിർത്തുക (> ||): മീഡിയ പ്ലേബാക്ക് പ്ലേ ചെയ്യുകയോ താൽക്കാലികമായി നിർത്തുകയോ ചെയ്യുന്നു.
Radio Operation (FM)
- Selecting FM: Press the MODE button until FM is selected.
- ട്യൂണിംഗ്: Use the track control buttons to seek for stations.
- പ്രീസെറ്റുകൾ സംരക്ഷിക്കുന്നു: Tune to a desired station, then press and hold one of the numbered preset buttons (1-6) to save it. The unit supports 18 FM presets.
- RDS: The unit supports RDS (Radio Data System) for displaying station information where available.
ബ്ലൂടൂത്ത് പ്രവർത്തനം
The NQ537BD features Bluetooth Version 5.0 for wireless audio streaming and hands-free calling.
- ജോടിയാക്കൽ:
- നിങ്ങളുടെ മൊബൈൽ ഉപകരണത്തിൽ ബ്ലൂടൂത്ത് പ്രവർത്തനക്ഷമമാക്കിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- Select Bluetooth mode on the NQ537BD using the MODE button.
- On your mobile device, search for available Bluetooth devices and select "NQ537BD" (or similar).
- ആവശ്യപ്പെടുകയാണെങ്കിൽ ജോടിയാക്കൽ സ്ഥിരീകരിക്കുക.
- ബ്ലൂടൂത്ത് സംഗീതം: Once paired, you can stream audio from your device to the car stereo. Use the unit's controls or your phone to play/pause and skip tracks.
- ഹാൻഡ്സ് ഫ്രീ കോളിംഗ്: When a call comes in, the unit will display caller information. Use the front panel or remote to answer/end calls. The built-in or external microphone will be used for communication.
USB/TF Playback
The unit supports playback from USB drives and TF (microSD) cards.
- മീഡിയ ചേർക്കുന്നു: Insert a USB drive into the front USB port (or via the extension cable) or a TF card into the designated slot.
- Selecting Source: Press the MODE button to select USB or TF mode.
- File പ്ലേബാക്ക്: The unit will automatically begin playing compatible audio files (MP3, WMA, AAC, FLAC, APE). Use the track controls to navigate.
- Front USB 2A Charge: The front USB port also provides 2A charging for your mobile devices.
Audio Settings (DSP, EQ, Xbass, Xover, 3D Surround, Time Alignment)
The NQ537BD offers advanced audio customization:
- DSP (Digital Signal Processor): The embedded DSP allows for precise sound tuning.
- EQ (സമനില): Access the 30-band equalizer to fine-tune audio frequencies. 8 preset EQ curves are also available.
- Xbass: Enhances low-frequency response for a deeper bass sound.
- Xover (Crossover): Adjust crossover frequencies for speakers and subwoofers to optimize sound distribution.
- 3D സറൗണ്ട്: Activates a simulated surround sound effect.
- Time Alignment (0-20ms): Adjust the delay for individual speakers to ensure sound reaches the listener at the same time, creating a more focused soundstage.
- Q Value (1-20): Adjusts the bandwidth of the equalizer filters.
- സബ് വൂഫർ നിയന്ത്രണം: Dedicated controls for subwoofer output level and phase.
- Configuration of Listening Bits: Advanced setting for audio processing.
അപ്ലിക്കേഷൻ നിയന്ത്രണം
Control your NQ537BD from your iOS or Android smartphone. Download the official Nakamichi app from your device's app store. The app provides an intuitive interface for controlling various functions and audio settings.
മെയിൻ്റനൻസ്
- യൂണിറ്റ് വൃത്തിയാക്കൽ: മുൻവശത്തെ പാനൽ തുടയ്ക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക. കഠിനമായ അഴുക്കിന്, dampen the cloth with water or a mild, non-abrasive cleaner. Never use harsh chemicals or solvents.
- ക്ലീനിംഗ് കണക്ടറുകൾ: Ensure all connections are clean and free of dust or corrosion.
- സോഫ്റ്റ്വെയർ അപ്ഡേറ്റുകൾ: Check the Nakamichi website periodically for any available firmware updates for your unit.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your NQ537BD, refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ശക്തിയില്ല | തെറ്റായ വയറിംഗ്; ഫ്യൂസ് പൊട്ടി; വാഹന ബാറ്ററി പ്രശ്നം | Check power (yellow, red) and ground (black) connections. Inspect the unit's fuse and vehicle's fuse box. Ensure battery is charged. |
| ശബ്ദമില്ല | ശബ്ദം വളരെ കുറവാണ്; മ്യൂട്ട് സജീവമാക്കി; തെറ്റായ സ്പീക്കർ വയറിംഗ്; Ampലൈഫയർ പ്രശ്നം | Increase volume. Check if mute is on. Verify speaker connections. If using external amps, check their power and connections. |
| ബ്ലൂടൂത്ത് കണക്റ്റ് ചെയ്യുന്നില്ല | Unit not in pairing mode; Device Bluetooth off; Interference | Ensure unit is in Bluetooth mode. Turn Bluetooth on/off on your device. Delete previous pairings and re-pair. Move closer to the unit. |
| USB/TF not playing | പൊരുത്തമില്ലാത്തത് file format; Corrupted media; Incorrect source selected | ഉറപ്പാക്കുക files are MP3, WMA, AAC, FLAC, or APE. Try a different USB/TF card. Select USB/TF mode. |
| റിമോട്ട് കൺട്രോൾ പ്രവർത്തിക്കുന്നില്ല | Dead battery; Obstruction; Out of range | Replace remote battery. Ensure no objects block the IR sensor. Use within effective range. |
ഉപയോക്തൃ ടിപ്പുകൾ
- ശബ്ദം ഒപ്റ്റിമൈസ് ചെയ്യുക: Experiment with the 30-band EQ and Time Alignment features to tailor the sound to your vehicle's acoustics and your personal preference.
- ബ്ലൂടൂത്ത് സൗകര്യം: Utilize the Bluetooth 5.0 for seamless audio streaming and hands-free calls, keeping your focus on the road.
- ആപ്പ് നിയന്ത്രണം: Download the Nakamichi app for an easier way to manage settings and playback directly from your smartphone.
- USB ചാർജിംഗ്: അഡ്വാൻ എടുക്കുകtage of the 2A front USB port to quickly charge your mobile devices while on the go.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| പാനൽ തരം | പരിഹരിച്ചു |
| എൽസിഡി ഡിസ്പ്ലേ | 2 lines, VA-LCD |
| Main Illumination | ബഹുവർണ്ണം |
| ബ്ലൂടൂത്ത് പതിപ്പ് | 5.0 |
| ബ്ലൂടൂത്ത് സവിശേഷതകൾ | Music Streaming, Hands-Free Calling |
| ഡി.എസ്.പി | ഉൾച്ചേർത്തത് |
| ഇക്വലൈസർ (EQ) | 30 bands, 8 presets |
| പ്രീ-ഔട്ട്പുട്ട് | 7CH x 4V |
| പരമാവധി പവർ ഔട്ട്പുട്ട് | 4x50W |
| Audio Enhancements | Xbass, Xover, 3D Surround |
| സമയ വിന്യാസം | XXX - 0 മി |
| Q മൂല്യം | 1-20 |
| സബ് വൂഫർ നിയന്ത്രണം | അതെ |
| പ്ലേബാക്ക് ഇന്റർഫേസ് | TF and USB |
| SWI Support | CAP™-SWI |
| വിദൂര പിന്തുണ | അതെ |
| മൈക്രോഫോൺ | അന്തർനിർമ്മിതവും ബാഹ്യവും |
| റേഡിയോ പ്രീസെറ്റുകൾ | 18FM, 12h, RDS |
| അപ്ലിക്കേഷൻ നിയന്ത്രണം | iOS and Android phone |
| Front USB Charge | 2A |
| ഓഡിയോ ഫോർമാറ്റുകൾ | MP3, WMA, AAC, FLAC, APE |
വാറൻ്റിയും പിന്തുണയും
For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your authorized Nakamichi dealer. Keep your proof of purchase for any warranty claims.





