1. ആമുഖം
The DEWALT Drill Flip Drive Unit is a versatile 2-in-1 tool accessory designed for efficient drilling of pilot holes and driving screws. It allows for quick and easy changes between drilling and driving functions, helping users complete tasks faster. This unit is available in #6, #8, and #10 sizes, corresponding to models DW2700, DW2701, and DW2702 respectively. It features black oxide split-point drill bits for immediate contact drilling and a quick-change mechanism for single-step loading.
Important: This product is not 'Impact Ready' and should only be used with a regular drill chuck, not an impact driver.
2. സജ്ജീകരണം
- Attaching to Drill: Insert the hexagonal shank of the flip drive unit into the chuck of your regular drill. Tighten the chuck securely to ensure the unit is firmly held.
- Inserting/Removing Bits: The flip drive unit features a quick-change mechanism. To insert a drill bit or screwdriver bit, pull back the collar on the unit, insert the desired bit, and release the collar. The bit should lock into place. To remove, pull back the collar and pull out the bit.
3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The DEWALT Drill Flip Drive Unit simplifies the process of drilling pilot holes and driving screws. Follow these steps for optimal use:
- പൈലറ്റ് ദ്വാരങ്ങൾ തുരക്കൽ:
- Ensure the drill bit is securely inserted into the flip drive unit.
- ആവശ്യമുള്ള ഡ്രില്ലിംഗ് സ്ഥലത്ത് ഡ്രിൽ ബിറ്റ് സ്ഥാപിക്കുക.
- Apply steady, even pressure and activate your drill to create the pilot hole. The black oxide split-point drill bits are designed to start on contact, preventing walking.
- Flipping to Drive: Once the pilot hole is drilled, pull the collar on the flip drive unit, rotate the unit 180 degrees to expose the screwdriver bit, and release the collar to lock it in place.
- ഡ്രൈവിംഗ് സ്ക്രൂകൾ:
- Place the screwdriver bit into the head of the screw.
- Activate your drill to drive the screw into the pilot hole. The countersink feature will ensure the screw head sits flush with the surface.
ഓപ്പറേഷൻ ഡെമോൺസ്ട്രേഷൻ വീഡിയോ
Video 1: Demonstrates the quick drill, flip, and drive functionality of the DEWALT unit.
4. പരിപാലനം
- വൃത്തിയാക്കൽ: After each use, wipe down the flip drive unit and bits with a clean, dry cloth to remove any dust, wood chips, or debris. For stubborn residue, a slightly damp തുണി ഉപയോഗിക്കാം, തുടർന്ന് നന്നായി ഉണക്കാം.
- ലൂബ്രിക്കേഷൻ: Periodically apply a small amount of light machine oil to the moving parts of the quick-change mechanism to ensure smooth operation.
- പരിശോധന: Regularly inspect the drill bits and screwdriver bits for signs of wear, dullness, or damage. Replace worn bits to maintain optimal performance and prevent damage to your workpiece. Check the flip drive unit for any loose components or damage.
- സംഭരണം: Store the unit and bits in a dry environment to prevent rust and corrosion. Keep them in their original packaging or a suitable tool organizer to protect them from damage.
5. പ്രശ്നപരിഹാരം
- ചക്കിൽ ബിറ്റ് സ്ലിപ്പിംഗ്: Ensure the drill chuck is tightened sufficiently around the hexagonal shank of the flip drive unit. If the problem persists, check the chuck jaws for wear or damage.
- Bit Slipping in Flip Drive Unit: Make sure the quick-change collar is fully released and locked after inserting the bit. Inspect the bit's shank for damage that might prevent it from seating correctly.
- Poor Countersink Finish: This can be caused by a dull countersink bit or incorrect drilling speed/pressure. Ensure the bit is sharp and apply consistent pressure.
- Difficulty Flipping Unit: If the unit is stiff or difficult to flip, clean the mechanism thoroughly and apply a small amount of lubricant as described in the Maintenance section.
6 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| ബ്രാൻഡ് നാമം | ഡിവാൾട്ട് |
| മോഡൽ നമ്പറുകൾ | DW2700 (#6), DW2701 (#8), DW2702 (#10) |
| മെറ്റീരിയൽ | ഉയർന്ന കാർബൺ സ്റ്റീൽ |
| ഉപയോഗിക്കുക | Wood Drilling, Metalworking |
| സർട്ടിഫിക്കേഷൻ | CE |
| ഉത്ഭവം | മെയിൻലാൻഡ് ചൈന |
| പാക്കേജ് ദൈർഘ്യം | 25 സെ.മീ |
| പാക്കേജ് വീതി | 9 സെ.മീ |
| പാക്കേജ് ഉയരം | 3 സെ.മീ |
| പാക്കേജ് ഭാരം | 0.15 കി.ഗ്രാം |
7 ഉപയോക്തൃ നുറുങ്ങുകൾ
- ഒപ്റ്റിമൽ വേഗത: Use appropriate drill speeds for the material you are working with. Slower speeds are generally better for harder materials or larger drill bits, while faster speeds work well for softer materials.
- സ്ഥിരമായ സമ്മർദ്ദം: Apply steady and consistent pressure when drilling and driving to achieve clean holes and flush screw heads.
- Bit Condition: Always ensure your drill bits and screwdriver bits are sharp and in good condition. Dull bits can lead to splintering, stripped screw heads, and inefficient work. Consider having replacement bits on hand, as they can wear out over time.
- സുരക്ഷ ആദ്യം: Always wear appropriate personal protective equipment, including safety glasses, when operating power tools.
8. വാറൻ്റിയും പിന്തുണയും
This DEWALT product is covered by the manufacturer's standard warranty. For specific warranty details, service, or technical support, please refer to the official DEWALT webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുകയോ ചെയ്യുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.
