ZOYI ZT-N1 സ്മാർട്ട് സോൾഡറിംഗ് അയൺ യൂസർ മാനുവൽ

ആമുഖം

Thank you for choosing the ZOYI ZT-N1 Smart Soldering Iron. This high-powered, portable soldering iron features 96W power, fast heating, auto-sleep, temperature regulation, PD/QC protocol support, sleep protection, and an OLED display for efficient and precise soldering tasks. This manual provides essential information for safe and effective use.

സുരക്ഷാ വിവരങ്ങൾ

• Always use the soldering iron in a well-ventilated area.
• The soldering tip can reach very high temperatures (up to 450°C / 842°F). Avoid direct contact with skin or flammable materials.
• Use appropriate personal protective equipment, such as safety glasses and heat-resistant gloves.
• Ensure the soldering iron is placed securely on its stand when not in use.
• Unplug the device when not in use or before performing any maintenance.
• കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
• Do not use the device if the power cord or soldering tip is damaged.

പാക്കേജ് ഉള്ളടക്കം

പാക്കേജ് തുറക്കുമ്പോൾ, എല്ലാ ഇനങ്ങളും നിലവിലുണ്ടെന്നും നല്ല നിലയിലാണെന്നും ദയവായി പരിശോധിക്കുക:

• ZOYI ZT-N1 Smart Soldering Iron
• യുഎസ്ബി ടൈപ്പ്-സി കേബിൾ
• സോൾഡറിംഗ് ഇരുമ്പ് സ്റ്റാൻഡ്
• Aluminum Pen Cap
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

ഉൽപ്പന്നം കഴിഞ്ഞുview

The ZOYI ZT-N1 is a high-performance smart soldering iron designed for precision repair and general soldering tasks. It features an internal heating element for rapid temperature achievement and an OLED display for clear information.

സജ്ജമാക്കുക

1. **Unpacking**: Carefully remove all components from the packaging.
2. **Tip Installation**: Ensure the T12 soldering tip is securely inserted into the heating element. The tip is designed for easy replacement.
3. **Power Connection**: Connect the soldering iron to a compatible power source using the provided USB Type-C cable. The device supports PD (Power Delivery) and QC (Quick Charge) protocols for flexible power options, including plug-in charging or power bank charging.
4. **Placement**: Place the soldering iron on its designated stand when not actively held for soldering to prevent accidental burns or damage.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. **Power On/Off**:
   • To turn on the device, press and hold the power button (labeled with a power symbol and "OK") for 2 seconds.
   • To turn off the device, press and hold the power button for 2 seconds again.
2. **Navigation and Adjustment**:
   • In the main interface, briefly press the power button to move the menu selection to the right.
   • In the main interface, briefly press the 'Up' or 'Down' arrow buttons to move the menu selection to the left or right, respectively.
   • In the usage or settings interface, press the 'Up' or 'Down' arrow buttons to increase or decrease the setting parameters (e.g., temperature).
   • In the usage or settings interface, briefly press the power button to confirm a selection or return to the main interface.
3. **Temperature Setting**:
   • Once powered on, the OLED display will show the current temperature and set temperature.
   • Use the 'Up' and 'Down' arrow buttons to adjust the desired soldering temperature within the range of 100°C to 450°C (212°F to 842°F).
   • The device features PID temperature control for rapid and stable heating.
4. **Auto Sleep Mode**:
   • The soldering iron is equipped with an adjustable sleep mode with automatic sensing.
   • If the device is not in use for a set period (default 5-20 minutes, adjustable), it will automatically enter sleep mode to prevent dry burning and extend tip lifespan.
   • When picked up, the device automatically heats up to the set temperature.

   

5. **Soldering**:
   • Allow the iron to reach the set temperature. The OLED display will indicate when it's ready.
   • Apply solder to the joint, touching both the component lead and the PCB pad with the hot tip.
   • Remove the solder, then remove the iron.

   

മെയിൻ്റനൻസ്

• **Tip Cleaning**: Regularly clean the soldering tip using a damp അധിക സോൾഡറും ഓക്സീകരണവും നീക്കം ചെയ്യാൻ സ്പോഞ്ച് അല്ലെങ്കിൽ പിച്ചള കമ്പിളി ഉപയോഗിക്കുക. ഇത് കാര്യക്ഷമമായ താപ കൈമാറ്റം ഉറപ്പാക്കുകയും ടിപ്പിന്റെ ആയുസ്സ് വർദ്ധിപ്പിക്കുകയും ചെയ്യുന്നു.
• **Tip Tinning**: After cleaning and before storage, tin the tip with a small amount of fresh solder to prevent oxidation.
• **Tip Replacement**: If the soldering tip becomes worn or damaged, replace it with a new T12 compatible tip. Ensure the iron is cool and unplugged before replacing the tip.
• **Device Cleaning**: Wipe the body of the soldering iron with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• **Storage**: Store the soldering iron in a dry, safe place, preferably with the aluminum pen cap covering the tip, when not in use.

ട്രബിൾഷൂട്ടിംഗ്

• **Iron Not Heating**:
  • Check if the power cable is securely connected to both the iron and the power source.
  • Ensure the power source (adapter or power bank) is functioning correctly and provides sufficient power (PD/QC compatible).
  • Verify the iron is powered on (hold the power button for 2 seconds).
  • If the tip is old or heavily oxidized, it might not heat efficiently. Try cleaning or replacing the tip.
• **OLED Display Not Working**:
  • ഉപകരണം ഓണാണെന്ന് ഉറപ്പാക്കുക.
  • If the display remains blank after power-on, try disconnecting and reconnecting the power. If the issue persists, contact customer support.
• **Temperature Fluctuations**:
  • Ensure the soldering tip is properly seated and making good contact with the heating element.
  • Avoid using the iron in excessively drafty environments, which can affect temperature stability.
• **Auto Sleep Not Activating/Deactivating**:
  • Check the sleep mode settings in the device menu to ensure it's enabled and the duration is set correctly.
  • Ensure the iron is placed on a stable surface when not in use for the motion sensor to detect inactivity.

സ്പെസിഫിക്കേഷനുകൾ

ഉപയോക്തൃ ടിപ്പുകൾ

• **Optimal Temperature**: For most common soldering tasks, a temperature between 300°C and 380°C is usually sufficient. Adjust as needed for different solder types and components.
• **Pre-tinning Wires**: Always pre-tin wires before connecting them to components or PCBs for stronger, more reliable joints.
• **Proper Ventilation**: Even with lead-free solder, fumes can be harmful. Ensure good ventilation or use a fume extractor.
• **Power Source**: For best performance, use a power adapter or power bank that supports PD (Power Delivery) or QC (Quick Charge) protocols to utilize the full 96W heating capability.
• **Portability**: The compact design makes it ideal for on-the-go repairs. Remember to use the aluminum pen cap for safe transport.

വാറൻ്റിയും പിന്തുണയും

The ZOYI ZT-N1 Smart Soldering Iron is manufactured by ZOYI Electrical Measuring Instruments Store. For any product-related inquiries, technical support, or warranty claims, please contact the seller directly through the platform where the purchase was made.

നിർദ്ദിഷ്ട വാറന്റി നിബന്ധനകൾക്കും വ്യവസ്ഥകൾക്കും നിങ്ങളുടെ വാങ്ങൽ ഡോക്യുമെന്റേഷൻ പരിശോധിക്കുക.