മിബോക്‌സർ 3 ഇൻ 1 SPI LED കൺട്രോളറും B6 2.4G SPI പാനൽ റിമോട്ട് യൂസർ മാനുവലും

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your Miboxer 3-in-1 SPI LED Controller (Model: SPIR3) and the B6 2.4G SPI Panel Remote. This system is designed to control single color, RGB, and RGBW SPI LED strips, offering versatile lighting control for various applications.

Image: Miboxer SPIR3 Controller and B6 Remote (black and white versions).

2. Safety Information and Attention

• ഉപകരണം ഇൻസ്റ്റാൾ ചെയ്യുമ്പോൾ, സുരക്ഷ ഉറപ്പാക്കാൻ ദയവായി പവർ ഓഫ് ചെയ്യുക.
• ഇൻപുട്ട് വോളിയമാണോ എന്ന് പരിശോധിക്കുകtage ഉപകരണവുമായി പൊരുത്തപ്പെടുന്നു.
• പ്രൊഫഷണൽ അല്ലാത്ത ഉപയോക്താക്കൾക്ക് ഉപകരണം നേരിട്ട് ഡിസ്അസംബ്ലിംഗ് ചെയ്യാൻ കഴിയില്ല, അല്ലാത്തപക്ഷം ഉപകരണം കേടായേക്കാം.
• Do not use the device near large metal areas or strong magnetic areas, as it will affect the signal and control distance.
• Do not use the remote in humidity or high temperature areas.
• Take out batteries if not using the remote frequently and keep it in a dry or static electricity area.
• This remote control is only compatible with Miboxer SPI LED controllers (SPIR3/SPIR3-M).

3. ഉൽപ്പന്ന സവിശേഷതകൾ

3.1 SPIR3 3-in-1 SPI LED Controller (2.4GHz)

• 3-in-1 functionality: Supports Single color, RGB, and RGBW SPI LED strips.
• Pixel Dots: Single color (2048), RGB (1536), RGBW (1024).
• Output Signal: SPI (TTL) 800Kbps.
• Setting ON/OFF time and color.
• Total 20 dynamic modes with support for editing their colors.
• DND (Do Not Disturb) function: Retains status (lights on or off) after power outage, useful for power failure areas to save power.
• 2.4GHz wireless transmission technology for high-speed, stable signal, and strong anti-interference.
• Supports communication with multiple devices and control of multiple devices simultaneously.
• Magnetic holder with simple installation.
• Wide application for commercial or home lighting.

3.2 B6 SPI Panel Remote (2.4GHz)

• Aligns color and adjusts length (number of Pixel points) of SPI strip.
• Selects dynamic mode and controls speed.
• Saves scenes.
• Changes dynamic mode, color, brightness, and dynamic lighting features.
• Edits width and color for dynamic mode.
• Sets time and color for ON/OFF.
• Works with multiple controllers (control distance 30m).
• Magnetic holder for simple installation.

4 സ്പെസിഫിക്കേഷനുകൾ

4.1 SPIR3 3-in-1 SPI LED Controller

അളവുകൾ: 74.5mm x 36mm x 17mm

Image: SPIR3 Controller Features and Parameters, including dimensions and certifications.

4.2 B6 SPI Panel Remote

Dimensions: 86mm x 86mm x 15mm (Panel), 86mm x 86mm x 5mm (Magnetic Base)

Image: B6 Remote Dimensions and Packaging, showing the panel and magnetic base dimensions.

5. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ സാധാരണയായി ഉൾപ്പെടുന്നു:

• 1 x Miboxer SPIR3 3-in-1 SPI LED Controller (2.4GHz)
• 1 x Miboxer B6 SPI Panel Remote (2.4GHz) (Note: AAA batteries are not included)
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

Image: SPIR3 Controller and accessories in its retail box.

Image: B6 Black Remote and manual in its retail box.

6. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

6.1 SPIR3 Controller Wiring

Connect the SPIR3 controller to your power supply and LED strip as shown in the diagram below. Ensure correct polarity (V+ and V-) and proper connection to the SPI LED strip's data lines (DO1, DO2) and ground (GND).

Image: Connection Diagram for SPIR3 Controller with power supply, SPI LED strip, and optional PUSH switch. It also shows the remote control signal path.

ഇൻപുട്ട്: DC5V-24V

ഔട്ട്പുട്ട്: V+, GND, DO1, DO2 (for SPI LED strip)

An optional PUSH switch can be connected for basic ON/OFF control.

6.2 B6 Remote Installation

The B6 remote uses 2x AAA batteries (not included). Install them into the battery compartment. The remote comes with a magnetic base for easy mounting on a wall or other magnetic surfaces.

1. Fix the double-sided tape on the back of the base.
2. Attach the base securely to your desired surface.
3. Install 2x AAA batteries into the remote.
4. The remote is magnetized to the base.

Image: Step-by-step guide for installing the B6 remote control, including battery insertion and mounting the magnetic base.

6.3 Linking the Remote to the Controller

The controller must be linked with the remote before use.

1. Power off the controller for 10 seconds and then turn it on again.
2. Within 3 seconds of powering on, short press the "ON" button on the remote 3 times.
3. If successful, the connected light strip will flash green 3 times slowly.

Attention: If linking fails (light doesn't flash), repeat the steps. You cannot link a remote that has already finished linking.

Image: Visual guide for linking the B6 remote to the SPIR3 controller.

6.4 Unlinking the Remote from the Controller

To unlink a remote from the controller:

1. Power off the controller for 10 seconds and then turn it on again.
2. Within 3 seconds of powering on, short press the "ON" button on the remote 5 times.
3. If successful, the connected light strip will flash red 10 times quickly.

Attention: If unlinking fails (light doesn't flash), repeat the steps. There is no need to unlink if the light has never been linked.

Image: Visual guide for unlinking the B6 remote from the SPIR3 controller.

7. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

7.1 റിമോട്ട് കൺട്രോൾ ഓവർview (B6)

The B6 remote features various controls for your LED strip:

Image: Diagram illustrating the buttons and indicators on the B6 remote control, including ON/OFF, RGB/RGBW/Pixel number/Speed/Brightness sliders, Dynamic Mode (M), and Scene buttons (S1, S2, S3).

• ഓൺ/ഓഫ്: Power on/off the LED strip.
• RGBW: Change color of pure static lighting.
• RGB: നിറം മാറ്റുക.
• പിക്സൽ നമ്പർ: Change length or width (more information in setting).
• വേഗത: Change dynamic mode speed.
• തെളിച്ചം: Dim brightness.
• ഷിഫ്റ്റ്: Short press to change color of dynamic mode. Long press to change direction of dynamic mode.
• Dynamic Mode (M): Short press to change dynamic mode.
• Scene (S1, S2, S3): Long press to save a scene.

7.2 Output Mode Setting (SPIR3 Controller)

The SPIR3 controller supports Single color, RGB, and RGBW output modes. You can switch between these modes using the "SET" button on the controller.

• Single color mode: Press the SET key repeatedly until the indicator turns red.
• RGB മോഡ്: Press the SET key repeatedly until the indicator turns green.
• RGBW mode: Press the SET key repeatedly until the indicator turns blue.

Image: Close-up of the SPIR3 controller showing the "SET" button and indicator lights for output mode selection (Red for Single Color, Green for RGB, Blue for RGBW).

7.3 Advanced Settings (Using B6 Remote)

These settings are performed using the B6 remote after linking.

7.3.1 Setting the Color Sequence from Strip Light

Long press "OFF" for 5 seconds until the light strip lights up a single color.

• Flashing red: Short press red area.
• Flashing green: Short press green area.
• Flashing blue: Short press blue area.
• Flashing white: Short press "ON/OFF" button.

The system automatically closes after the setting is complete.

Image: Visual guide for setting the color sequence of the LED strip using the B6 remote.

7.3.2 Setting Length (Pixel Number: mini 8pt, max 2048pt)

Long press "ON" for 5 seconds until the light strip lights up white color and the last point is blinking.

• Slide to change length.
• Short press to add one pixel point.
• Long press to add pixel points continuously.
• Short press to reduce one pixel point.
• Long press to reduce pixel points continuously.

Short press "ON/OFF" to exit once setting is done.

7.3.3 Setting Width for Dynamic Mode

Slide the pixel number control to change the pixel point number and get different lengths for dynamic mode, which has various sections.

7.3.4 Setting Time and Color for ON/OFF

Short press "OFF" 5 times to enter into running ON/OFF setting.

• Slide "Speed" to set time for ON/OFF.
• Slide "RGB" to set color for ON/OFF.

Short press "ON/OFF" to exit once setting is done.

7.3.5 Turn On/Off Do Not Disturb Mode (DND)

The DND mode is applicable to areas with frequent power outages to save energy.

ശല്യപ്പെടുത്തരുത് മോഡ് ഓണാക്കുക:

• Short press the "OFF" button 3 times within 3 seconds.
• Then short press the "ON" button 3 times.
• The light flashes 4 times to indicate success.

ശ്രദ്ധിക്കുക: എപ്പോൾ എൽamp ഒരു പവർ ou ശേഷം വീണ്ടും പവർ ചെയ്യുന്നുtage, its status (lights on or off) will remain the same as before the power outage.

ശല്യപ്പെടുത്തരുത് മോഡ് ഓഫാക്കുക:

• Short press the "ON" button 3 times within 3 seconds.
• Then short press the "OFF" button 3 times.
• The light flashes 4 times slowly to indicate successful shutdown.

ശ്രദ്ധിക്കുക: എപ്പോൾ എൽamp ഒരു പവർ ou ശേഷം വീണ്ടും പവർ ചെയ്യുന്നുtagഇ, അതിൻ്റെ സ്റ്റാറ്റസ് ഡിഫോൾട്ടായി ഓണായിരിക്കും.

Image: Instructions for setting ON/OFF time and color, and activating/deactivating Do Not Disturb mode.

8. പരിപാലനം

• മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിച്ച് ഉപകരണങ്ങൾ വൃത്തിയാക്കുക. അബ്രസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
• Ensure the remote control batteries are replaced when they run low to maintain optimal performance.
• Keep the devices away from excessive heat, direct sunlight, and moisture.

9. പ്രശ്‌നപരിഹാരം

• Light strip not responding to remote:
  • കൺട്രോളർ ഓണാക്കിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • Check if the remote batteries are installed correctly and have sufficient charge.
  • Verify that the remote is properly linked to the controller (refer to Section 6.3).
  • Ensure the remote is within the 30m control distance.
  • Check for strong magnetic fields or large metal objects that might interfere with the 2.4GHz signal.
• Incorrect color or mode:
  • Verify the output mode setting on the SPIR3 controller (Section 7.2).
  • Adjust settings using the B6 remote (Section 7.3).
• Controller not functioning:
  • ഇൻപുട്ട് വോളിയം പരിശോധിക്കുകtage to ensure it is within DC5V~24V.
  • Ensure all wiring connections are secure and correct.
  • If the device was disassembled by a non-professional, it might be damaged.

10 ഉപയോക്തൃ നുറുങ്ങുകൾ

• For optimal performance, ensure the controller and remote are not obstructed by large metal objects.
• Experiment with the dynamic modes and scene saving features to personalize your lighting experience.
• Utilize the DND function in areas prone to power fluctuations to maintain your preferred lighting state.

11. വാറൻ്റിയും പിന്തുണയും

The Miboxer SPIR3 controller comes with a 2-year warranty. For technical support or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.