Butterfly V40

ബട്ടർഫ്ലൈ V40 റിമോട്ട് കൺട്രോൾ എയർക്രാഫ്റ്റ് ഇൻസ്ട്രക്ഷൻ മാനുവൽ

മോഡൽ: V40

1. Safety Information & Compliance

Please read this manual thoroughly before operating the Butterfly V40 Remote Control Aircraft. Keep it for future reference.

⚠ Disclaimer: For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.

Recommended Age: 14+ years. Although the product is designed for ease of use, adult supervision is recommended for younger operators.

2. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

  • Butterfly V40 Aircraft
  • Magic Wand Remote Controller
  • Rechargeable Lithium Battery (Modular)
  • സ്പെയർ പ്രൊപ്പല്ലറുകൾ (4 കഷണങ്ങൾ)
  • യുഎസ്ബി ചാർജിംഗ് കേബിൾ
  • നിർദ്ദേശ മാനുവൽ (ഈ പ്രമാണം)
Contents of Butterfly V40 package including drone, remote, battery, propellers, and charging cable.
Figure 2.1: Package Contents of the Butterfly V40 Aircraft.

3. സജ്ജീകരണ ഗൈഡ്

3.1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

  1. Locate the battery compartment on the underside of the Butterfly V40 aircraft.
  2. Insert the modular lithium battery into the compartment, ensuring it clicks securely into place.
Modular battery compartment on the Butterfly V40 drone.
Figure 3.1: Modular battery for easy replacement.

3.2 ബാറ്ററി ചാർജ് ചെയ്യുന്നു

  1. Connect the USB charging cable to the aircraft's charging port and a suitable USB power source (e.g., computer, USB wall adapter).
  2. The indicator light on the charging cable or aircraft will show the charging status. Refer to the specific light behavior in the remote control guide diagram for details.
  3. പൂർണ്ണമായി ചാർജ് ചെയ്തുകഴിഞ്ഞാൽ, കേബിൾ വിച്ഛേദിക്കുക.

3.3. റിമോട്ട് കൺട്രോളർ സജ്ജീകരണം

  1. Ensure the remote controller has fresh batteries installed (not specified, assume standard AAA or AA).
  2. Turn on the remote controller using the power switch.
  3. The remote controller and aircraft should automatically pair. If not, refer to the troubleshooting section.
Child holding the magic wand remote control.
Figure 3.2: Magic Wand Remote Control for 2.4G long-distance operation.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1. പവർ ഓൺ/ഓഫ്

  1. To power on the aircraft, press and hold the power button on the aircraft until the lights illuminate.
  2. To power on the remote controller, slide the power switch to the 'ON' position.
  3. To power off, reverse the steps.

4.2. Basic Flight Controls (Remote Control Guide)

Diagram of the remote control with labeled buttons and their functions.
Figure 4.1: Remote Control Guide with button functions.
  • പൈലറ്റ് എൽamp: Indicates remote status.
  • Short Press Emergency Stop / Long Press Calibration: Quickly stop the drone or calibrate its sensors.
  • കൺട്രോൾ സ്റ്റിക്ക്: Controls flight direction and altitude.
  • Short Press Speed / Press and Hold to Switch Modes: Adjust flight speed or change between flight modes.
  • Short Press Headless Mode / Long Press Hover: Activate headless mode or initiate stable hovering.
  • വൈദ്യുതി സ്വിച്ച്: Turns the remote controller on/off.
  • Press the Light Switch and Hold to Fine-Tune Mode: Control the aircraft's lights and fine-tune flight.
  • Gravity Release Switch: Activates gravity sensing mode.

4.3. ടേക്ക് ഓഫും ലാൻഡിംഗും

  • വൺ-കീ ടേക്ക് ഓഫ്: Press the designated 'Take Off' button on the remote (refer to Figure 4.1). The aircraft will automatically ascend to a stable hovering height.
  • വൺ-കീ ലാൻഡിംഗ്: Press the designated 'Land' button. The aircraft will automatically descend and land gently.
  • അടിയന്തരമായി നിർത്തുക: In case of emergency, short press the 'Emergency Stop' button.
Butterfly V40 drone with remote, illustrating one-key takeoff.
Figure 4.2: One-key takeoff for simple operation.

4.4. Flight Modes & Features

  • ഒപ്റ്റിക്കൽ ഫ്ലോ ഹോവറിംഗ്: The drone uses optical sensors to maintain a stable position, making it easier to control.
  • Barometric Height Setting: Automatically sets and maintains a fixed height for stable hovering. Features three-speed switch for different skill levels.
  • ഗ്രാവിറ്റി സെൻസിംഗ് മോഡ്: Switch to gravity sensing mode using the remote. The drone will respond to the tilt of the remote controller.
  • തലയില്ലാത്ത മോഡ്: In headless mode, the aircraft automatically recognizes the direction of the remote control, eliminating the need to identify the front and back of the aircraft. This makes it easier for beginners to control.
  • One-Click Circling (Aerial Stunts): Perform cool aerial stunts with a single button press.
  • തടസ്സം ഒഴിവാക്കൽ: Features front and rear induction obstacle avoidance. The drone will automatically turn right after front induction to avoid collision risks.
  • വർണ്ണാഭമായ ലൈറ്റുകൾ: The aircraft is equipped with high brightness LED lights for dazzling night flights.
Diagram showing core functions of the intelligent flight system.
Figure 4.3: Core functions of the intelligent flight system.
Butterfly V40 drone demonstrating front and rear induction obstacle avoidance.
Figure 4.4: Intelligent obstacle avoidance in action.

4.5. ഉൽപ്പന്ന പ്രദർശന വീഡിയോ

Video 4.1: Demonstration of Butterfly V40 features including one-key takeoff, optical flow hovering, 2.4G remote control, EPP anti-fall material, throwing go, stunt tumbling, gravity sensing, speed gears, intelligent obstacle avoidance, one-key circling, and one-key landing.

5. പരിപാലനം

  • വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the aircraft and remote controller. Do not use water or harsh chemicals.
  • ബാറ്ററി കെയർ: Always fully charge the battery before use. Do not overcharge. Store the battery in a cool, dry place when not in use. Remove the battery if the aircraft will not be used for an extended period.
  • പ്രൊപ്പല്ലർ മാറ്റിസ്ഥാപിക്കൽ: If a propeller is damaged, carefully remove it and replace it with a new one from the spare parts provided. Ensure the new propeller is installed correctly.
  • മെറ്റീരിയൽ ഈട്: The aircraft is made from high-toughness EPP (Expanded Polypropylene) and plastic, designed to be resistant to falls and crashes. However, extreme impacts should still be avoided.
Butterfly V40 drone made of EPP material, highlighting its durability.
Figure 5.1: High toughness EPP material for enhanced durability.

6. പ്രശ്‌നപരിഹാരം

  • Aircraft not responding to remote: Ensure both the aircraft and remote are powered on and fully charged. Re-pair the remote and aircraft if necessary (refer to remote control guide for calibration).
  • അസ്ഥിരമായ ഫ്ലൈറ്റ്/ഡ്രിഫ്റ്റിംഗ്: Perform a calibration of the aircraft (long press emergency stop button on remote). Ensure propellers are not damaged and are installed correctly. Fly in an area free from strong air currents.
  • കുറഞ്ഞ ഫ്ലൈറ്റ് സമയം: Ensure the battery is fully charged. Battery performance may degrade over time; consider replacing if flight time significantly decreases.
  • തടസ്സം ഒഴിവാക്കൽ പ്രവർത്തിക്കുന്നില്ല: Ensure the sensors are clean and unobstructed. Fly in well-lit conditions for optimal sensor performance.
  • ലൈറ്റുകൾ പ്രവർത്തിക്കുന്നില്ല: Check if the light switch on the remote is activated.

7 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
ഉൽപ്പന്നത്തിൻ്റെ പേര്4D-V40
ടൈപ്പ് ചെയ്യുകAirplane (Quadcopter)
അളവുകൾ16.5 x 21.5 x 6.5 സെ.മീ
മെറ്റീരിയൽEPP / Plastic
Flight Time (Endurance)5~10 minutes (approx. 8 minutes)
പവർ ഉറവിടംQuadrotor output (4 turbofan motors)
സിഗ്നൽ ആവൃത്തി2.4G
ബാറ്ററി തരംLithium Battery (Removable Module Battery)
ബാറ്ററികൾ ഉൾപ്പെടുത്തിയിട്ടുണ്ട്അതെ
ചാനലുകൾ നിയന്ത്രിക്കുക6 ചാനലുകൾ
കൺട്രോളർ മോഡ്മോഡ്2
ഇൻഡോർ/ഔട്ട്ഡോർ ഉപയോഗംഇൻഡോർ-ഔട്ട്ഡോർ
ഫീച്ചറുകൾBarometric Height Setting, 4 Turbofan Motors, One-Click Takeoff/Landing/Circling, Cool LED Lights, One-Click Stop, Gravity Model, Headless Mode, Obstacle Avoidance
ശുപാർശ ചെയ്യുന്ന പ്രായം14+ വർഷം
പാക്കേജിൽ ഉൾപ്പെടുന്നുOriginal Box, Remote Controller, Battery, Spare Propellers, USB Charging Cable
Table of product parameters for the Butterfly V40 drone.
ചിത്രം 7.1: വിശദമായ ഉൽപ്പന്ന പാരാമീറ്ററുകൾ.
Dimensions of the Butterfly V40 drone and its packaging.
Figure 7.2: Product and packaging dimensions.

8 ഉപയോക്തൃ നുറുങ്ങുകൾ

  • തുടക്കക്കാർക്ക് സൗഹൃദം: The Butterfly V40 is designed for easy flight, making it suitable for beginners. Start with slower speeds and open areas.
  • Indoor/Outdoor Flexibility: Enjoy flying both indoors and outdoors. Be mindful of wind conditions when flying outside.
  • Gravity Sensing Fun: Experiment with the gravity sensing remote control for an interactive flying experience.
  • Night Flight: The dazzling LED lights make for an exciting night flight experience. Ensure you have clear visibility of the drone.
  • പരിശീലനം പൂർണതയിലെത്തിക്കുന്നു: അഡ്വാൻ എടുക്കുകtage of features like optical flow hovering and headless mode to build confidence and master controls.

9. വാറണ്ടിയും പിന്തുണയും

ഏതെങ്കിലും ഉൽപ്പന്ന അന്വേഷണങ്ങൾ, സാങ്കേതിക പിന്തുണ അല്ലെങ്കിൽ വാറന്റി ക്ലെയിമുകൾ എന്നിവയ്‌ക്ക്, വിൽപ്പനക്കാരനെയോ നിർമ്മാതാവിനെയോ നേരിട്ട് ബന്ധപ്പെടുക. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.


GDRC Butterfly V40 Remote Control Drone for Kids with Optical Flow Hovering and Obstacle Avoidance

GDRC Butterfly V40 Remote Control Drone for Kids with Optical Flow Hovering and Obstacle Avoidance

1:00 • 1280×720 • ഡെമോൺസ്ട്രേഷൻ

അനുബന്ധ രേഖകൾ - Butterfly V40

പ്രീview GDRC 4D-M3 ക്വാഡ്‌കോപ്റ്റർ പ്രവർത്തന നിർദ്ദേശങ്ങളും ഉപയോക്തൃ മാനുവലും
GDRC 4D-M3 ക്വാഡ്‌കോപ്റ്ററിനായുള്ള സമഗ്രമായ പ്രവർത്തന നിർദ്ദേശങ്ങളും ഉപയോക്തൃ മാനുവലും, സജ്ജീകരണം, റിമോട്ട് കൺട്രോൾ പ്രവർത്തനം, APP നിയന്ത്രണം, സുരക്ഷാ മുന്നറിയിപ്പുകൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview ക്രോസ്ലാൻഡർ ബട്ടർഫ്ലൈ റിമോട്ട്-കൺട്രോൾഡ് ടോയ്: യൂസർ മാനുവലും ഓപ്പറേഷൻ ഗൈഡും
ലെക്സിബുക്ക് ക്രോസ്ലാൻഡർ ബട്ടർഫ്ലൈ റിമോട്ട് കൺട്രോൾ കളിപ്പാട്ടം പ്രവർത്തിപ്പിക്കുന്നതിനുള്ള സമഗ്രമായ ഗൈഡ്, സജ്ജീകരണം, ഫ്ലൈറ്റ് നിയന്ത്രണങ്ങൾ, സുരക്ഷ, അറ്റകുറ്റപ്പണികൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview ഫോർ ആക്സിസ് എയർക്രാഫ്റ്റ് X1-നുള്ള ഉപയോക്തൃ മാനുവൽ
ഫോർ ആക്സിസ് എയർക്രാഫ്റ്റ് X1 പ്രവർത്തിപ്പിക്കുന്നതിനുള്ള നിർദ്ദേശങ്ങൾ ഈ ഉപയോക്തൃ മാനുവലിൽ നൽകുന്നു, അതിൽ സജ്ജീകരണം, ഫ്ലൈറ്റ് നിയന്ത്രണങ്ങൾ, സുരക്ഷാ മുൻകരുതലുകൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview മിഗിപാസ് ബട്ടർഫ്ലൈ ഫ്ലൈ ഇന്ററാക്ടീവ് ക്യാറ്റ് ടോയ് യൂസർ മാനുവൽ
ഇൻഡോർ പൂച്ചക്കുട്ടികൾക്കായി രൂപകൽപ്പന ചെയ്‌തിരിക്കുന്ന ഒരു ഇന്ററാക്ടീവ് ഓട്ടോമാറ്റിക് ക്യാറ്റ് ടോയ് ആയ മിഗിപാസ് ബട്ടർഫ്ലൈ ഫ്ലൈയുടെ ഉപയോക്തൃ മാനുവൽ. സെൽഫ്-പ്ലേയിംഗ്, ഓട്ടോമാറ്റിക് സെൻസിംഗ് കിറ്റി ടീസർ വാൻഡിനായുള്ള അസംബ്ലി, പ്രവർത്തനം, സവിശേഷതകൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഈ ഗൈഡിൽ ഉൾപ്പെടുന്നു.
പ്രീview ORSDA T62 3-in-1 Interactive Cat Toy User Guide
Comprehensive user guide for the ORSDA T62 3-in-1 interactive cat toy, detailing its features, operation, safety precautions, and troubleshooting for indoor cats.
പ്രീview ദി റാബിറ്റ് കമ്പനി കം ഹിദർ ബട്ടർഫ്ലൈ ജി-കിസ് വൈബ് യൂസർ മാനുവലും സ്പെസിഫിക്കേഷനുകളും
ദി റാബിറ്റ് കമ്പനിയുടെ കം ഹിതർ ബട്ടർഫ്ലൈ ജി-കിസ് വൈബിലേക്കുള്ള സമഗ്രമായ ഗൈഡ്, സജ്ജീകരണം, പ്രവർത്തനം, പരിചരണം, സുരക്ഷ, സ്പെസിഫിക്കേഷനുകൾ, നീക്കംചെയ്യൽ എന്നിവ ഉൾക്കൊള്ളുന്നു. ശരീരത്തിന് സുരക്ഷിതമായ സിലിക്കണിൽ നിന്ന് നിർമ്മിച്ചത്.