Radiolink F722 Flight Controller & Flycolor 55A 4-in-1 ESC Instruction Manual

ആമുഖം

This manual provides comprehensive instructions for the Radiolink F722 Flight Controller and the Flycolor 55A 4-in-1 Electronic Speed Controller (ESC) stack. Designed for FPV racing drones, quadcopters, and other RC aircraft, this stack offers high performance and versatility with support for Betaflight and INAV firmware.

1 സ്പെസിഫിക്കേഷനുകൾ

1.1 Radiolink F722 Flight Controller Specifications

1.2 Flycolor 55A 4-in-1 ESC Specifications

2. പാക്കേജ് ഉള്ളടക്കം

2.1 Radiolink F722 Only Package

The 'Radiolink F722 Only' package includes:

• F722 Flight Controller * 1
• ESC Connect Cable * 2
• Camera Connect Cable * 1
• ELRS Receiver Connect Cable * 1
• Analog Video Transmission Connect Cable * 1
• GPS Connect Cable * 1
• R8SM Receiver Connect Cable * 2
• Receiver Connect Cable * 2
• ഇൻസ്ട്രക്ഷൻ മാനുവൽ * 1
• പാക്കേജ് ബോക്സ് * 1

2.2 F722 4-in-1 ESC Stack Package

The 'F722 4in1 ESC Stack' package includes:

• F722 Flight Controller * 1
• 4-in-1 ESC * 1
• Camera Connect Cable * 1
• ELRS Receiver Connect Cable * 1
• Analog Video Transmission Connect Cable * 1
• GPS Connect Cable * 1
• Receiver Connect Cable * 2
• ESC Connect Cable * 2

2.3 Flycolor 55A 4-in-1 ESC Only Package

The '4in1 55A ESC' package includes:

• ESC * 1
• XT60 Power Connector * 1
• FC/ESC Connect Cable * 1
• Low ESR Capacitor * 1
• O-Ring * 5
• Silicone Vibration Absorber * 1

3. സജ്ജീകരണം

3.1 ഘടകം ഓവർview

The Radiolink F722 Flight Controller and Flycolor 55A 4-in-1 ESC form a compact and powerful stack for various RC applications. The F722 FC features a STM32F722RET6 main processor, ICM42688 gyroscope, BMP280/DPS310 barometer, and an integrated OSD module. The Flycolor 55A 4-in-1 ESC is designed for 3-6S LiPo batteries and supports various throttle signals.

3.2 വയറിംഗും കണക്ഷനുകളും

Careful wiring is crucial for the proper functioning of your RC aircraft. The F722 FC offers multiple interfaces for connecting various peripherals.

The F722 FC supports both CADDX HD Digital and DJI HD Digital Image Transmission systems with plug-and-play compatibility. Refer to the diagrams below for specific wiring instructions.

For a complete system integration, the F722 FC can be combined with various Radiolink components and other third-party devices to create a cost-effective solution for high-speed aerial photography and cinematography.

3.3 Firmware Installation and Configuration

The Radiolink F722 FC supports both Betaflight and INAV firmware. Users can specify their preferred firmware before shipment. If no preference is stated, the default factory firmware will be flashed.

Configuration can be performed using the Betaflight Configurator or INAV Configurator software on a PC or mobile phone. For the ESC, use Bluejay Configurator or BLHeliSuite for parameter adjustment.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 FPV Flight with OSD

The integrated OSD module allows for real-time display of critical flight information such as flight mode, distance, GPS satellites, longitude, latitude, home direction, GPS speed, and battery voltage. This enhances situational awareness during FPV flight.

4.2 ESC Telemetry

The ESC supports information telemetry, providing data on motor status and performance. It is compatible with two-way DShot, OneShot, and PWM signals.

4.3 Adaptable Models

The F722 Flight Controller is adaptable to a wide range of models including 2-8 axis multi-rotors (including X8 models), airplanes, A-tail quads, bicopters, custom airplanes, custom tricopters, dualcopters, flying-wings, gimbals, Helicopter120, HEL+, HEX H, HEX X, OCTO FLAT+, OCTO FLAT X, OCTO X8, OCTO X8+, PPM to Servo, Quad+, Quad X, Quad X 1234, Singlecopter, Tricopter, V-tail Quad, Y4, Y6.

5. പരിപാലനം

5.1 പൊതു പരിചരണം

Keep the flight controller and ESC clean and free from dust and debris. Use a soft, dry brush or compressed air for cleaning. Avoid exposing the components to moisture or extreme temperatures.

5.2 Connection Inspection

Regularly inspect all wiring and solder joints for any signs of wear, corrosion, or loose connections. Secure any loose connections immediately.

5.3 ഫേംവെയർ അപ്ഡേറ്റുകൾ

Periodically check the official Radiolink website for firmware updates. Keeping your firmware up-to-date can improve performance and add new features.

6. പ്രശ്‌നപരിഹാരം

6.1 പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും

• പവർ ഇല്ല/ഇടവിട്ട പവർ: Check all power connections, including the battery, XT60 connector, and BEC output. Ensure the input voltage is within the specified 3-6S range.
• Motors Not Spinning/Incorrect Direction: Verify ESC connections to the flight controller and motor wiring. Use the Betaflight/INAV configurator to check motor output and direction. Calibrate ESCs if necessary using Bluejay or BLHeliSuite.
• No OSD Display: Ensure the OSD module is correctly configured in Betaflight/INAV. Check video transmission connections (digital or analog) and ensure your FPV goggles/monitor are receiving a signal.
• അസ്ഥിരമായ ഫ്ലൈറ്റ്: Review PID settings in Betaflight/INAV. Ensure the flight controller is securely mounted and vibration-isolated. Check for any loose propellers or damaged motors.
• റിസീവർ പ്രതികരിക്കുന്നില്ല: Verify receiver wiring (SBUS/CRSF) and binding with your transmitter. Check receiver settings in the flight controller software.

7 ഉപയോക്തൃ നുറുങ്ങുകൾ

• For optimal performance, ensure proper vibration isolation for the flight controller. Use the provided silicone vibration absorbers.
• Always double-check wiring diagrams before making connections to prevent damage to components.
• Familiarize yourself with the Betaflight or INAV configurator software for advanced tuning and customization.
• Consider using a smoke stopper during initial power-up after assembly to prevent short-circuit damage.

8. വാറൻ്റിയും പിന്തുണയും

For detailed warranty information, technical support, and the latest resources, please visit the official Radiolink webസൈറ്റ്: https://www.radiolink.com/f722.