ആമുഖം
The HOCO H65 Universal Sucker Car Phone Holder is designed to securely mount your smartphone in your vehicle, providing convenient access for navigation, calls, and music. Featuring a strong suction cup and a 360° adjustable design, it is suitable for dashboards, windshields, and center consoles, accommodating smartphones from 4.5 to 7 inches.
ഉൽപ്പന്നം കഴിഞ്ഞുview
ഘടകങ്ങൾ
- Adjustable Phone Clamp (Chuck)
- One-Button Release Mechanism
- Adjustable Arm/Neck
- സക്ഷൻ കപ്പ് ബേസ്
- Suction Lock Lever
ഫീച്ചറുകൾ
- Universal compatibility for 4.5-7 inch smartphones (chuck range: 65-85mm).
- Strong suction cup for secure mounting on windshields, dashboards, or center consoles.
- 360° rotation for optimal viewകോണുകളുടെ ക്രമീകരണം (ഛായാചിത്രം അല്ലെങ്കിൽ ലാൻഡ്സ്കേപ്പ്).
- One-button release mechanism for easy phone insertion and removal.
- Durable ABS+silicone construction with texturing surface process.
- Compact and stable design.
ചിത്രം 1: മുൻഭാഗം view of the HOCO H65 Car Phone Holder, showing the phone clamp and suction cup base.
സജ്ജീകരണ നിർദ്ദേശങ്ങൾ
- Choose a Mounting Surface: Select a clean, flat, and smooth surface on your car's windshield, dashboard, or center console. Ensure the surface is free from dust, grease, and moisture.
- ഉപരിതലം വൃത്തിയാക്കുക: Wipe the chosen area with a clean cloth. For optimal adhesion, you may use an alcohol wipe and let it dry completely.
- സക്ഷൻ കപ്പ് ഘടിപ്പിക്കുക:
- Ensure the suction lock lever is in the unlocked (upright) position.
- Press the suction cup firmly against the cleaned surface, ensuring no air bubbles are trapped underneath.
- Push the suction lock lever down to secure the holder in place.
ചിത്രം 2: പിൻഭാഗം view of the holder, showing the suction cup and adjustment knob.
- ആംഗിൾ ക്രമീകരിക്കുക: Loosen the adjustment knob(s) on the arm to set the desired viewing angle and position. Tighten the knob(s) once the desired position is achieved.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
- നിങ്ങളുടെ ഫോൺ തിരുകുക:
- Press the one-button release mechanism (usually located on the back or side of the phone clamp) to open the clamp ആയുധങ്ങൾ.
- Place your smartphone into the clamp, ensuring it is centered and securely held by the side grips.
- Clamp arms will automatically adjust or can be gently pressed to secure the phone.
- നിങ്ങളുടെ ഫോൺ നീക്കം ചെയ്യുക:
- Press the one-button release mechanism to open the clamp ആയുധങ്ങൾ.
- Carefully remove your smartphone.
- ക്രമീകരിക്കുക Viewഓറിയന്റേഷൻ: The phone holder supports 360° rotation. Gently rotate your phone to switch between portrait and landscape viewing modes as needed.
Figure 3: Phone holder mounted on a dashboard with a smartphone in landscape orientation.
Figure 4: Phone holder mounted on a dashboard with a smartphone in portrait orientation.
മെയിൻ്റനൻസ്
- സക്ഷൻ കപ്പ് വൃത്തിയാക്കൽ: If the suction cup loses its stickiness, rinse it with warm water and let it air dry. Do not use harsh chemicals or abrasive materials.
- Cleaning the Holder: Wipe the holder with a soft, damp cloth. Avoid using solvents or strong cleaning agents.
- പതിവ് പരിശോധനകൾ: Periodically check that all adjustable parts are tightened and the suction cup is securely attached, especially before long drives.
- സംഭരണം: When not in use for extended periods, store the holder in a cool, dry place away from direct sunlight to prolong the life of the suction cup.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| സക്ഷൻ കപ്പ് പറ്റിനിൽക്കുന്നില്ല | Surface is dirty, oily, or uneven; suction cup is dirty or worn. | Clean the mounting surface and the suction cup with warm water and air dry. Ensure the surface is flat and smooth. Press firmly before engaging the lock lever. |
| ഫോൺ സുരക്ഷിതമായി പിടിച്ചിട്ടില്ല. | Phone size outside chuck range; clamp arms not fully engaged; one-button mechanism malfunction. | Ensure your phone is within the 4.5-7 inch range (65-85mm chuck). Press the clamp arms gently to ensure a snug fit. If the mechanism is faulty, contact support. |
| Holder wobbles or moves | Adjustment knobs are loose; suction cup not fully secured. | Tighten all adjustment knobs. Re-attach the suction cup ensuring it is firmly pressed and the lock lever is engaged. |
സ്പെസിഫിക്കേഷനുകൾ
| ആട്രിബ്യൂട്ട് | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ | H65 |
| മെറ്റീരിയൽ | എബിഎസ് + സിലിക്കൺ |
| ഉപരിതല പ്രക്രിയ | ടെക്സ്ചറിംഗ് |
| അളവുകൾ (L x W x H) | 160 x 93 x 114 മിമി |
| ഭാരം | 173 ഗ്രാം |
| അനുയോജ്യമായ ഫോൺ വലുപ്പം | 4.5 - 7 inches (Chuck range: 65-85mm) |
| മൗണ്ടിംഗ് ലൊക്കേഷൻ | Car Windshield, Dashboard, Center Console |
| ഭ്രമണം | 360° |
| പാക്കേജ് അളവുകൾ (L x W x H) | 15 x 12 x 10 സെ.മീ |
| പാക്കേജ് ഭാരം | 0.5 കി.ഗ്രാം |
ഉപയോക്തൃ ടിപ്പുകൾ
- For best suction, ensure the mounting surface is completely clean and dry. A slightly damp (not wet) suction cup can sometimes improve adhesion on very smooth surfaces.
- Avoid repositioning the holder frequently, as this can reduce the lifespan of the suction cup.
- In extremely cold weather, allow your car's interior to warm up slightly before attempting to mount the holder, as cold can affect suction cup flexibility.
- Always ensure your phone is securely clamped before driving.
വാറൻ്റിയും പിന്തുണയും
For warranty information, technical support, or any inquiries regarding your HOCO H65 Car Phone Holder, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
