ആമുഖം
The Speedybee F405 V5 Stack BLS 55A is an integrated Flight Controller (FC) and Electronic Speed Controller (ESC) solution designed for FPV drones. This stack combines a powerful F405 V5 FC with a 32-bit 55A 4-in-1 ESC, offering robust performance, wireless tuning capabilities, and advanced features for both recreational and competitive FPV pilots. This manual provides essential information for the proper installation, configuration, and operation of your Speedybee F405 V5 Stack.
പാക്കേജ് ഉള്ളടക്കം
The Speedybee F405 V5 Stack is available in Standard and Deluxe editions. Please verify your package contents against the lists below.
Standard Edition Package Contents
- SpeedyBee F405 V5 Model Aircraft Flight Controller x1
- SpeedyBee OX32 55A 32 55A 4-in-1 Model Aircraft ESC x1
- Model Aircraft Stack Connector Cable x1 (SH1.0 10pin*25mm)
- Model Aircraft Stack Connector Cable x1 (SH1.0 10pin*75mm)
- DJI Air Unit Connector Cable x1 (SH1.0 6pin*80mm)
- GPS 6pin Connector Cable + 6pin SH1.0 Terminal x1 (SH1.0 6pin*120mm)
- GPS 4pin Connector Cable + 4pin SH1.0 Terminal x1 (SH1.0 6pin to SH1.0 4pin*120mm)
- Receiver 4pin Connector Cable x1 (SH1.0 4pin*100mm)
- XT60 Power Cable x1 (120mm)
- M3 Model Aircraft Stack Mounting Screws x4 (30mm)
- M3 Hex Nylon Nuts x5
- M3 Black Silicone Washers x5
- Capacitor Heat Shrink Tube x2
- 35V 1000uF Solid Capacitor x1
- Quick Start Guide for Model Aircraft Stack x1
- Model Aircraft FC Silicone Covers x5
- Model Aircraft ESC Silicone Covers x5
Deluxe Edition Additional Contents
- Short-Circuit Protection Tool x1
- Soldering Practice Board x1
- USB Extension Board x1
- Power Expansion Board x4
- Buzzer Red & Black Wires x1 (100mm)
- Active Buzzer x1
- Type-C Extension Module 4pin Connector Cable x1
- Type-C Extension Module x1
സ്പെസിഫിക്കേഷനുകൾ
SpeedyBee F405 V5 30.5x30.5mm Model Aircraft Flight Controller
| ഉൽപ്പന്നത്തിൻ്റെ പേര് | SpeedyBee F405 V5 30.5x30.5mm Model Aircraft Flight Controller |
|---|---|
| എം.സി.യു | STM32F405 |
| IMU (Gyro) | ICM42688 |
| യുഎസ്ബി പോർട്ട് തരം | New Type-C interface |
| ബാരോമീറ്റർ | SPA06-003 |
| OSD ചിപ്പ് | AT7456E |
| Full-featured Bluetooth Tuning | Supported. Connect via SpeedyBee App for FC firmware flashing and parameter tuning. |
| Wireless FC Firmware Upgrade | പിന്തുണച്ചു |
| DJI Air Unit Connection | Supports 6-pin direct plug-in or solder connection |
| ബ്ലാക്ക്ബോക്സ് | Supported, built-in 16MB storage chip |
| ഇൻപുട്ട് വോളിയംtage | 3-6S LiPo ബാറ്ററി |
| Independent 5V BEC Output | 9 groups (4x +5V pads on front, 1x BZ+ buzzer pad, and 4x +5V pads at the corners for external LEDs). Total output current: 1.5A. |
| Independent 9V BEC Output | 2 groups (1x 9V pad on front, 1x 9V output in a connector on the back). Total output current: 3A. Supports PINIO remote on/off control. |
| MCU & Gyro Power | Independent LDO |
| 3.3V ഔട്ട്പുട്ട് | 1 group (1x 3.3V pad on front) |
| 4.5V ഔട്ട്പുട്ട് | 3 groups (3x 4.5V pads on front). Can power receiver and GPS when FC is powered via USB. Max output current: 1A. |
| ESC സിഗ്നൽ | M1-M4 pads and 10-pin connector on the back |
| Servo Signal | S5-S6 pads on the front |
| ESC Telemetry Input | Supported (UART5) |
| Betaflight Camera Tuning Pad | Supported (CC pad on front) |
| I2C | Supported (GPS connector + pads) |
| UART | UART1 (Bluetooth); UART2 (front pads for receiver); UART3 (DJI VTX pads + rear SH1.0-6-pin); UART4 (GPS pads + front SH1.0-6-pin); UART5 (TLM); UART6 (receiver pads + rear SH1.0-4-pin) |
| ST LED Pads | Supported, on front G/5V/LED pads; controlled by FC firmware |
| Meteor LED Strip Pads | Supported. Switch between SB-LED and ST-LED modes via BOOT button or App. In SB-LED mode, controlled by ESP32 Bluetooth chip. |
| ബസർ പാഡുകൾ | പിന്തുണച്ചു |
| ബൂട്ട് ബട്ടൺ | [A] Hold BOOT while powering on to force DFU mode for flashing. [B] When powered and in standby, short-press cycles LED display modes; long-press switches SB-LED/ST-LED. In ST-LED mode, LED1-LED4 are controlled by FC firmware. |
| RSSI Pads | പിന്തുണച്ചു |
| സ്മാർട്ട് പോർട്ട് | പിന്തുണയ്ക്കുന്നില്ല |
| പിന്തുണയ്ക്കുന്ന FC ഫേംവെയർ | Betaflight, iNAV, Ardupilot (Preloaded with Betaflight 4.5.2) |
| ഫേംവെയർ ടാർഗെറ്റ് പേര് | SPEEDYBEEF405V5 |
| Configurator Version | Betaflight 10.10.0 |
| മൗണ്ടിംഗ് ദ്വാരങ്ങൾ | 30.5 × 30.5mm (Ø4mm), side opening |
| അളവുകൾ | 39mm (L) × 39mm (W) × 4.9mm (H) |
| ഭാരം | 8.1 ഗ്രാം |
SpeedyBee OX32 55A 30.5x30.5 4-in-1 ESC
| ഉൽപ്പന്നത്തിൻ്റെ പേര് | SpeedyBee OX32 55A 30.5x30.5 4-in-1 ESC |
|---|---|
| സ്ഥിരസ്ഥിതി ഫേംവെയർ | OX32 |
| തുടർച്ചയായ കറൻ്റ് | 55A (per channel) / 220A (4-in-1) |
| പരമാവധി കറൻ്റ് | 70A (per channel) / 280A (4-in-1) |
| TVS Protective Diode | അതെ (ബിൽറ്റ്-ഇൻ) |
| ബാഹ്യ കപ്പാസിറ്റർ | 1000μF Solid Capacitor (included in package) |
| ESC/Motor Protocol | DSHOT300/600 |
| ഇൻപുട്ട് വോളിയംtage | 3-6S LiPo |
| പവർ ഔട്ട്പുട്ട് | VBAT |
| നിലവിലെ സെൻസർ | പിന്തുണച്ചു |
| ESC Telemetry Input | പിന്തുണച്ചു |
| മൗണ്ടിംഗ് ദ്വാരങ്ങൾ | 30.5 × 30.5mm (Ø4mm), side opening |
| അളവുകൾ | 40.9mm (L) × 44.9mm (W) × 8.0mm (H) (incl. heatsink) |
| ഭാരം | 19.1 ഗ്രാം |
| Current Meter Note | Supported (Scale=27, Offset=-2644) |
General Product Attributes
| ആട്രിബ്യൂട്ട് | മൂല്യം |
|---|---|
| ഉയർന്ന തലത്തിലുള്ള രാസവസ്തുക്കൾ | ഒന്നുമില്ല |
| ഇലക്ട്രിക് ആണ് | ബാറ്ററി ഇല്ല |
| അളവ് | 1 പീസുകൾ |
| വീൽബേസ് | സ്ക്രൂകൾ |
| Is it battery/power supply | N |
| Is it charger/adapter | N |
| ബാറ്ററികൾ ഉൾപ്പെടുത്തിയിട്ടുണ്ടോ? | ഇല്ല |
| സാങ്കേതിക പാരാമീറ്ററുകൾ | മൂല്യം 2 |
| വാഹന തരത്തിന് | വിമാനങ്ങൾ |
| Tool Supplies | Assembled class |
| Four-wheel Drive Attributes | speedybee f405 v4 55a stack |
| Remote Control Peripherals/Devices | ഇഎസ്സി |
| Upgrade Parts/Accessories | speedybee f405 v3 50a stack |
| ആർസി പാർട്സും അക്കൗണ്ടുകളും | ഗൈറോസ് |
| മെറ്റീരിയൽ | സംയോജിത മെറ്റീരിയൽ |
| ഉത്ഭവം | മെയിൻലാൻഡ് ചൈന |
| പ്രായം ശുപാർശ ചെയ്യുക | 14+വയസ്സ് |
| ഉപയോഗിക്കുക | വാഹനങ്ങളും റിമോട്ട് കൺട്രോൾ കളിപ്പാട്ടങ്ങളും |
അളവുകൾ
സജ്ജമാക്കുക
Mounting the Stack
The F405 V5 Stack features 30.5 x 30.5mm mounting holes with a Ø4mm side opening. Use the provided M3 mounting screws, hex nylon nuts, and silicone washers for secure installation. The PCB-mounted frame and pad redesign offer easier soldering and a more compact installation than previous generations.
Wiring Diagram (Soldered Connection)
Refer to the detailed wiring diagram for soldered connections. Ensure all connections are made correctly to avoid damage to the components.
Motor and Power Connection
Connect your motors to the ESC and the XT60 power cable to the designated pads. It is strongly recommended to use the included 1000uF solid capacitor to protect the AIO flight controller from instantaneous voltage spikes when powered on.
Flight Controller Layout
Familiarize yourself with the layout of the F405 V5 Flight Controller and the BLS 55A 4-in-1 ESC to ensure correct connections for peripherals such as FPV camera, buzzer, GPS, receiver, and VTX.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Wireless Tuning 2.0 via SpeedyBee App
The Speedybee F405 V5 Stack features Wireless Tuning 2.0, allowing full configuration via the SpeedyBee App on your smartphone. This eliminates the need for a computer on-site for tuning and firmware updates.
- ഫേംവെയർ അപ്ഡേറ്റുകൾ: Perform APP-based wireless firmware updates with a one-click unbrick feature.
- Parameter Tuning: Adjust all flight controller parameters wirelessly.
- LED നിയന്ത്രണം: Configure and control the X4 Meteor LED strips and multicolor battery LEDs via the app.
BOOT Button Functionality
- DFU മോഡ്: Hold the BOOT button while powering on to force the FC into DFU mode for flashing firmware via USB.
- LED Mode Cycle: When powered and in standby, short-press the BOOT button to cycle through LED display modes.
- LED മോഡ് സ്വിച്ച്: Long-press the BOOT button to switch between SB-LED and ST-LED modes. In ST-LED mode, LED1-LED4 are controlled by the FC firmware.
Integrated Smart Switch
The integrated smart switch allows you to easily control the 5V output via a remote controller using the configurator. This delivers a steady 1.5A current and supports various applications without needing an extra electronic switch.
മെയിൻ്റനൻസ്
അനുരൂപമായ പൂശുന്നു
Both the flight controller and ESC come with a factory-applied conformal coating. This provides extra protection against moisture, solder residue, plant sap, and other harsh environmental conditions, enhancing the durability and longevity of your stack.
Recessed Type-C USB Port
The recessed Type-C USB port is designed to efficiently prevent USB detachment under extreme conditions. Its 2mm lower profile also makes battery installation and maintenance easier.
ട്രബിൾഷൂട്ടിംഗ്
- ശക്തിയില്ല: Double-check all power connections, especially the XT60 cable and the solid capacitor. Ensure the LiPo battery is charged and connected correctly (3-6S).
- No Signal to Motors: Verify motor connections to the ESC. Check ESC/Motor protocol settings in Betaflight (DSHOT300/600). Ensure ESC firmware (OX32) is correctly flashed.
- FC Not Connecting to App/PC: Ensure Bluetooth is enabled on your device for app connection. For PC connection, ensure the correct USB drivers are installed and try holding the BOOT button to enter DFU mode if flashing firmware.
- അസ്ഥിരമായ ഫ്ലൈറ്റ്: Review your Betaflight/iNAV/Ardupilot configuration. Ensure the ICM-42688 Gyroscope is properly calibrated. Check for any loose connections or physical damage to the drone frame or propellers.
- LEDs Not Working: Check LED strip connections. Ensure the correct LED mode (SB-LED/ST-LED) is selected via the BOOT button or SpeedyBee App. Verify LED settings in FC firmware.
ഉപയോക്തൃ ടിപ്പുകൾ
- ഫേംവെയർ അനുയോജ്യത: While the stack is preloaded with Betaflight, future support for iNAV and ArduPilot is planned. Always check the latest SpeedyBee documentation for firmware compatibility and flashing instructions.
- Amperage റേറ്റിംഗുകൾ: The product is rated for 55A continuous current. When comparing with other products, ensure you are comparing continuous current ratings, as peak current ratings can be higher (e.g., 70A peak for this ESC). This can influence pricing and performance expectations.
- Deluxe Edition Tools: If you have the Deluxe Edition, utilize the included Soldering Practice Board to hone your soldering skills before working on the actual flight stack. The Short-Circuit Protection Tool can be invaluable for safely testing your build.
- വയർലെസ് സൗകര്യം: Leverage the SpeedyBee App for all your tuning and configuration needs. It significantly simplifies field adjustments and firmware updates, reducing the need for a laptop.
- കൺഫോർമൽ കോട്ടിംഗ്: Although factory-applied, consider inspecting the coating periodically, especially after crashes or exposure to harsh elements, to ensure continued protection.
വാറൻ്റിയും പിന്തുണയും
For warranty claims, technical support, or further assistance, please contact your retailer or the official Speedybee support channels. Keep your proof of purchase for any warranty-related inquiries. Detailed support resources, including updated firmware and software, can often be found on the official Speedybee webസൈറ്റ്.
