FOXWELL T2000 PRO TPMS Service Tool User Manual

1. ആമുഖം

The FOXWELL T2000 PRO is a professional TPMS (Tire Pressure Monitoring System) diagnostic and maintenance tool. It is designed to activate and decode universal TPMS sensors, program FOXWELL T10 TPMS sensors, and diagnose original car tire pressure monitoring systems. This tool provides a complete solution for TPMS servicing, helping mechanics and DIY enthusiasts ensure driving safety by monitoring and maintaining tire health.

2. എന്താണ് ഉൾപ്പെടുത്തിയിരിക്കുന്നത്

Your FOXWELL T2000 PRO package includes the following items:

• 1x T2000 Pro Main Unit
• 1x കാന്തം
• 1x USB കേബിൾ
• 1x ബാറ്ററി ചാർജർ
• 1x ദ്രുത ആരംഭ ഗൈഡ്
• 1x Blow Molding Case
• 1x ഉപയോക്തൃ മാനുവൽ

3 സ്പെസിഫിക്കേഷനുകൾ

4. സജ്ജീകരണം

4.1. പ്രാരംഭ ചാർജിംഗ്

Before first use, ensure the T2000 PRO is fully charged using the provided battery charger. Connect the charger to the device and a power outlet. The device uses a 3.7V/2200mAH Li-polymer battery.

4.2. വാഹനവുമായി ബന്ധിപ്പിക്കുന്നു

To perform OBD-related functions, connect the T2000 PRO to your vehicle's OBDII port using the provided OBDII cable. The OBDII port is typically located under the dashboard on the driver's side.

4.3. ഭാഷ തിരഞ്ഞെടുക്കൽ

The T2000 PRO supports 18 languages. To change the language:

1. Navigate to the 'Settings' menu on the device.
2. 'ഭാഷ' തിരഞ്ഞെടുക്കുക.
3. Choose your desired language from the list.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1. TPMS Sensor Activation

The T2000 PRO can activate all known OEM/Universal TPMS sensors (315MHz and 433MHz). This allows you to retrieve sensor data such as Sensor ID, Tire Pressure, Tire Temperature, Battery Status, Sensor Position, Frequency, and OE Part number.

1. From the Main Menu, select 'TPMS'.
2. ശരിയായ വാഹന നിർമ്മാണം, മോഡൽ, വർഷം എന്നിവ തിരഞ്ഞെടുക്കുക.
3. Select 'Sensor Activate' from the menu.
4. Place the T2000 PRO tool near the tire sensor.
5. Press the 'Trigger' button on the device to begin activation.
6. The device will display the sensor information upon successful activation.

5.2. TPMS Sensor Relearn

After a tire change, tire repositioning, or TPMS sensor replacement, the system needs to relearn or calibrate the position of each tire and its corresponding sensor information. The T2000 PRO offers three methods for relearning sensors:

• സ്റ്റേഷണറി റീലേൺ: The vehicle enters a learning mode to trigger sensors and learn sensor IDs.
• ഓട്ടോ റീലേൺ: This method can be completed by driving the vehicle.
• OBD റീലേൺ: Use the T2000 PRO to write sensor IDs to the ECU via the OBD interface.

5.3. TPMS Sensor Programming (FOXWELL T10 Sensors Only)

The T2000 PRO can program FOXWELL T10 sensors to match vehicle specifications. This function is exclusively for FOXWELL T10 sensors.

• സജീവമാക്കൽ വഴി പകർത്തുക: If the original sensor is working and can be activated, the tool can clone its ID to a new FOXWELL T10 sensor.
1. Highlight 'TPMS' from the Main Menu and select the vehicle model.
2. Select 'Programming' > 'Clone by Activation'.
3. Place the T2000 PRO near the original sensor and press 'Activate'.
4. After successful trigger, press 'Y' to continue.
5. Place a new FOXWELL T10 sensor near the tool (0-20 cm).
6. Press 'Y' to start programming when the tool detects the sensor.
7. Press 'N' to exit after successful programming.
• സ്വമേധയാലുള്ള ഇൻപുട്ട് ഉപയോഗിച്ച് പകർത്തുക: If the original sensor ID is known, it can be manually entered to program a new sensor.
1. Highlight 'TPMS' from the Main Menu and select the vehicle model.
2. Select 'Programming' > 'Manual Create'.
3. Input the sensor ID in the dialog box and press 'Y' to continue.
4. Place a new FOXWELL T10 sensor near the tool (0-20 cm).
5. Press 'Y' to start programming when the tool detects the sensor.
6. Press 'N' to exit after successful programming.
• Auto Create: For situations where the original sensor ID is unknown or the sensor is faulty, the tool can create random IDs for FOXWELL T10 sensors.
1. Highlight 'TPMS' from the Main Menu and select the vehicle model.
2. Select 'Programming' > 'Automatic Create'.
3. Place new FOXWELL T10 sensors (1-16) near the tool (0-20 cm).
4. Press 'Y' to start programming when the tool detects the sensors.
5. Press 'N' to exit after successful programming.
• OBD പകർത്തിയത്: This function allows writing saved sensor information to FOXWELL T10 sensors after reading IDs from the vehicle using the 'Learning' function.
1. Highlight 'TPMS' from the Main Menu and select the vehicle model.
2. Select 'Programming' > 'Clone by OBD'.
3. Connect the TPMS tool to the vehicle via the OBDII cable and turn the ignition on.
4. Select the sensor ID to be copied after reading ID information successfully and press 'Y' to continue.
5. Place a new FOXWELL T10 sensor near the tool (0-20 cm).
6. Press 'F3' to start programming when the tool detects the sensor.
7. Press 'F1' to exit after successful programming.

5.4. Key Fob Testing

The T2000 PRO can test RF Remote Keyless Entry Key Fobs (315MHz and 433MHz) to ensure they are functioning correctly.

1. Scroll to highlight 'RKE & RF Monitor' from the Main Menu and press the 'YES' key.
2. Hold the Key Fob close to the tool and press the function buttons on the Fob.
3. If the button works and the Fob sends a signal, the tool will beep, and the screen will display the signal information.
4. Press the 'NO' key to exit.

5.5. Full OBDII Functions

The OBDII menu provides access to all OBD service modes, adhering to ISO 9141-2, ISO 14230-4, and SAE J1850 standards. When 'OBD II' is selected from the Home screen, the scanner automatically detects the communication protocol. Once connected, a menu lists available tests:

• സിസ്റ്റം സ്റ്റാറ്റസ്
• കോഡുകൾ വായിക്കുക
• ഫ്രെയിം ഡാറ്റ ഫ്രീസ് ചെയ്യുക
• കോഡുകൾ മായ്‌ക്കുക
• തത്സമയ ഡാറ്റ
• ഐ/എം റെഡിനെസ്
• O2 സെൻസർ ടെസ്റ്റ്
• ഓൺ-ബോർഡ് മോണിറ്റർ ടെസ്റ്റ്
• ഘടക പരിശോധന
• വാഹന വിവരം
• മൊഡ്യൂളുകൾ നിലവിലുണ്ട്
• കോഡ് ലുക്ക്അപ്പ്

6. പരിപാലനം

6.1. ഉപകരണ പരിപാലനം

• ഉപകരണം വൃത്തിയായും പൊടിയിൽ നിന്നും ഈർപ്പത്തിൽ നിന്നും മുക്തമായും സൂക്ഷിക്കുക.
• Store the device in its original protective carrying case when not in use to prevent damage.
• ഉപകരണം ഉപേക്ഷിക്കുകയോ ശക്തമായ ആഘാതങ്ങൾക്ക് വിധേയമാക്കുകയോ ചെയ്യരുത്.

6.2. സോഫ്റ്റ്‌വെയർ അപ്‌ഡേറ്റുകൾ

The FOXWELL T2000 PRO offers lifetime free software updates via WiFi and USB. Regularly updating your device ensures you have the latest vehicle coverage and features.

1. Connect the device to a Wi-Fi network or to a computer via USB.
2. Navigate to the 'Update' section in the device menu.
3. ലഭ്യമായ അപ്‌ഡേറ്റുകൾ ഡൗൺലോഡ് ചെയ്ത് ഇൻസ്റ്റാൾ ചെയ്യാൻ ഓൺ-സ്ക്രീൻ നിർദ്ദേശങ്ങൾ പാലിക്കുക.

7. പ്രശ്‌നപരിഹാരം

• Sensor Activation Failure: Ensure the T2000 PRO is placed very close to the tire sensor during activation. If the original sensors are dead or cannot be scanned, activation may fail.
• Sensor Cloning Issues: To perform sensor cloning, you must first know the old sensor ID. If not, use another scanner to retrieve the old sensor ID before attempting cloning with the T2000 PRO.
• Incorrect Menu Selection: If a specific menu option (e.g., for sensor activation) fails to work for your car, try other relevant menu options. Vehicle compatibility can sometimes vary, and trying different options for your car's make/model/year might resolve the issue.
• General Functionality Issues: If you encounter persistent issues, ensure your device software is up-to-date. If problems persist, contact customer support.

8 ഉപയോക്തൃ നുറുങ്ങുകൾ

• ഭാഷാ മാറ്റം: If you wish to change the device language, you may need to send the serial number of your T2000 PRO to customer support for activation of additional language packs.
• വാഹന അനുയോജ്യത: If you are unsure about the compatibility of the T2000 PRO with your specific vehicle, provide the VIN (Vehicle Identification Number) to customer support for verification before attempting complex procedures.
• Key Fob Frequency: When selecting menu options for sensor activation or key fob testing, if you know your key fob's frequency (315MHz or 433MHz), it can help narrow down the correct menu selection. If not, systematically try the available options for your vehicle.

9. വാറൻ്റിയും പിന്തുണയും

The FOXWELL T2000 PRO comes with lifetime free software updates, ensuring your device remains current with the latest vehicle data and features. For any technical assistance or inquiries, 24/7/365 support is available.