1. ആമുഖം
The BETAFPV Matrix 1S 5IN1 V1.0 Brushless Flight Controller is a highly integrated solution designed for both beginners and FPV enthusiasts. It features a robust 1mm-thick board for enhanced durability, especially during training, and includes built-in motor plugs to simplify installation by eliminating the need for soldering. Powered by an upgraded G473 processor, it offers a significant 55% performance boost over the F411, enabling more precise control for racing and freestyle flying. Additionally, its premium 5.8GHz 400mW VTX ensures stable and high-quality video transmission. This flight controller is ideal for FPV drones such as the Meteor65 Pro and Meteor75 Pro.
2 സുരക്ഷാ വിവരങ്ങൾ
- VTX പവർ മാനേജ്മെന്റ്: Higher VTX power settings consume more energy and generate increased heat, which can reduce flight time. For optimal flight duration in indoor environments, it is recommended to use VTX power settings between 25mW and 100mW.
- VTX ആന്റിന കണക്ഷൻ: Always connect and properly install the video transmission (VTX) antenna before powering on the flight controller. Failure to do so, or setting the transmission power to 0, can prevent VTX burnout.
- Firmware Flashing Caution: Do NOT flash the firmware with a shorter interval than recommended. Incorrect flashing procedures can lead to stalling or permanent damage to the flight controller.
- പരിസ്ഥിതി സംരക്ഷണം: Avoid exposing the flight controller to water, excessive moisture, or extreme temperatures.
- വൈദ്യുതി വിതരണം: വൈദ്യുതി വിതരണം വോളിയം ഉറപ്പാക്കുകtage and current are within the specified limits to prevent damage.
3. പാക്കേജ് ഉള്ളടക്കം
The BETAFPV Matrix 1S 5IN1 V1.0 Brushless Flight Controller package includes the following items:
- 1 * മാട്രിക്സ് 1S ബ്രഷ്ലെസ് ഫ്ലൈറ്റ് കൺട്രോളർ
- 1 * ടൈപ്പ്-സി മുതൽ SH1.0 വരെയുള്ള അഡാപ്റ്റർ
- 1 * SH1.0-4പിൻ അഡാപ്റ്റർ കേബിൾ
- 4 * M1.2*4 സെൽഫ്-ടാപ്പിംഗ് സ്ക്രൂകൾ
- 4 * M1.4*4 സെൽഫ്-ടാപ്പിംഗ് സ്ക്രൂകൾ
- 4 * ഷോക്ക് അബ്സോർബിംഗ് ബോളുകൾ
4 സ്പെസിഫിക്കേഷനുകൾ
| ഘടകം | സ്പെസിഫിക്കേഷൻ |
|---|---|
| എം.സി.യു | STM32G473CEU6 ഉൽപ്പന്ന വിവരണം |
| ഗൈറോ | ICM42688P |
| ബ്ലാക്ക്ബോക്സ് മെമ്മറി | 16എംബി |
| സെൻസർ | വാല്യംtagഇ & കറന്റ് |
| ബി.ഇ.സി | 5V, പരമാവധി 3A |
| UART പോർട്ടുകൾ | UART 1, UART 2 (VTX-ന്), UART 3 (RX-ന്), UART 4 |
| ബീറ്റാഫ്ലൈറ്റ് ഒ.എസ്.ഡി. | AT7456E |
| ESC തുടർച്ചയായ കറന്റ് | 5A |
| ESC പീക്ക് കറന്റ് | 8A |
| ESC ഫേംവെയർ | A_X_5_96KHz_V0.19.hex (BB51 Bluejay) |
| ഡിജിറ്റൽ സിഗ്നൽ പ്രോട്ടോക്കോൾ | ഡിഷോട്ട്300, ഡിഷോട്ട്600 |
| RX | Serial ELRS 2.4G (V3.4.3) |
| VTX Output Power | 25/100/200/400/പി.ഐ.ടി. |
| VTX Frequency | 5.8GHz 48 channels (Raceband: 5658~5917MHz) |
| VTX Channel Selection | സ്മാർട്ട് ഓഡിയോ 2.0 |
| USB പോർട്ട് | SH1.0-4പിൻ |
| മോട്ടോർ പ്ലഗ് | JST1.25 |
| ബാറ്ററി കണക്റ്റർ | BT2.0 |
| മൗണ്ടിംഗ് ഹോൾ വലുപ്പം | 26 മിമി x 26 മിമി |
| Circuit Board Thickness | 1.0 മി.മീ |
| ഭാരം | 3.92±0.1g (VTX antenna excluded) |
| പ്രവർത്തന താപനില | -10℃~+80℃ |
5. സജ്ജീകരണം
5.1 വയറിംഗ് ഡയഗ്രമുകൾ
Refer to the following diagrams for proper wiring connections for the Matrix 1S Brushless Flight Controller.
5.2 Serial Ports, Integrated RX and VTX Configuration
By default, UART2 is connected to the VTX and UART3 is connected to the RX. To release UART3 for other uses, you must remove the corresponding resistor. This flight controller also provides 2 complete full-featured serial ports that can be utilized for external CRSF/SBUS receivers, GPS modules, HD VTX systems, or other serial devices.
5.3 ഫേംവെയർ
5.3.1 Betaflight Firmware and CLI
Betaflight official developers recommend using version 42688 of the gyroscope. Many issues with ICM42688 have been resolved in Betaflight version 4.5.0. For more information, refer to version 4.5.0.
- FC ഫേംവെയർ: ബീറ്റാഫ്ലൈറ്റ്_4.5.0_BETAFPVG473
- Download the firmware and CLI dump file from the official Betaflight GitHub releases: https://github.com/betaflight/betaflight/releases/tag/4.5.0
5.3.2 Bluejay ESC Firmware
The Matrix 1S Brushless Flight Controller utilizes the BB51 ESC solution. It is based on the A_X_5_96KHz_V0.19.hex firmware for BB51 Bluejay hardware. This ESC supports D-shot300, D-shot600, and RPM filtering in Betaflight. It offers 24KHz, 48KHz, and 96KHz fixed PWM frequency options, along with custom start-up melodies.
- ESC Configurator: Access the ESC configurator at https://preview.esc-configurator.com/
- Download BLHeliSuite16714903.
- Download the Bluejay ESC firmware. Please choose A_X_5_96KHz_V0.19.hex.
5.4 ELRS 2.4G RX Binding and Firmware Update
The Serial ELRS 2.4G RX communicates with the flight controller board using the Crossfire serial protocol (CRSF protocol). This allows the Serial ELRS 2.4G RX to be upgraded to ELRS V3.0 without needing to flash the Betaflight flight controller firmware.
5.4.1 Entering Binding Status
To enter binding status, power on/off the flight controller three times:
- Plug in and unplug the flight controller three times.
- Observe the RX LED: a quick double blink indicates the receiver is in bind mode.
- Ensure your RF TX module or radio transmitter enters binding status, which sends out a binding pulse.
- If the receiver has a solid light, it is successfully bound.
5.4.2 Updating ELRS RX Firmware via Passthrough
The Serial ELRS 2.4G RX firmware can be updated via Wi-Fi or Betaflight serial passthrough. For passthrough updates:
- Plug your FC into your computer.
- Connect to ExpressLRS Configurator instead of Betaflight Configurator.
- Choose the target "BETAFPV 2.4GHz AIO RX".
- Flash the firmware using the BetaflightPassthrough option in ExpressLRS Configurator.
6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once the flight controller is properly installed, configured, and bound to your radio transmitter, you can proceed with operating your FPV drone. Ensure all pre-flight checks are completed, including battery levels, propeller security, and clear flight path. Always operate your drone responsibly and in accordance with local regulations.
7. പരിപാലനം
- പതിവ് പരിശോധന: ശാരീരിക ക്ഷതം, അയഞ്ഞ കണക്ഷനുകൾ, അല്ലെങ്കിൽ അവശിഷ്ടങ്ങൾ എന്നിവയുടെ ലക്ഷണങ്ങൾക്കായി ഇടയ്ക്കിടെ ഫ്ലൈറ്റ് കൺട്രോളർ പരിശോധിക്കുക.
- ശുചിത്വം: Keep the board clean from dust, dirt, and moisture. Use a soft, dry brush or compressed air for cleaning.
- ആന്റിന കെയർ: Always ensure the VTX antenna is securely connected before powering on to prevent damage to the VTX module.
- ഫേംവെയർ അപ്ഡേറ്റുകൾ: Keep firmware updated to the latest stable versions to benefit from performance improvements and bug fixes.
8. പ്രശ്നപരിഹാരം
- ശക്തിയില്ല: Check battery connection, power cable integrity, and ensure the battery is charged.
- വീഡിയോ ഫീഡ് ഇല്ല: Verify VTX antenna connection, VTX power settings, and camera wiring. Ensure your FPV goggles/monitor are on the correct frequency.
- പ്രതികരിക്കാത്ത നിയന്ത്രണങ്ങൾ: Check receiver binding status (solid RX LED), radio transmitter settings, and ensure correct protocol (CRSF) is selected in Betaflight.
- ഫ്ലൈറ്റ് അസ്ഥിരത: Review Betaflight configuration, PID settings, and ensure propellers are undamaged and correctly mounted.
- ഫേംവെയർ അപ്ഡേറ്റ് പ്രശ്നങ്ങൾ: If experiencing issues after a firmware update, ensure you followed the instructions precisely. Do not flash firmware with shorter intervals than specified to avoid damage.
9 ഉപയോക്തൃ നുറുങ്ങുകൾ
- തുടക്കക്കാർക്ക് അനുയോജ്യമായ ഡിസൈൻ: The Matrix 1S FC is ideal for beginners due to its enhanced durability (1mm thick board) and simplified installation with built-in motor plugs, eliminating the need for welding.
- Optimizing Flight Time: For indoor flying or to maximize flight duration, consider reducing your VTX power output to between 25mW and 100mW.
- Advanced Pilot Alternative: For experienced FPV pilots seeking a lighter, more responsive, and race-oriented experience, the BETAFPV Air Brushless FC 5IN1 version is recommended as an alternative.
- Meteor75 Pro Upgrade: As of November 20, the Meteor75 Pro is upgraded with the Matrix 1S Brushless FC, offering improved durability and performance for both indoor and outdoor FPV racing and freestyle flying.
10. വാറൻ്റിയും പിന്തുണയും
BETAFPV flight controllers are covered for manufacturer defects. However, the warranty does not cover issues arising from:
- ഉപയോക്തൃ പിശകുകൾ
- Physical crash damage
- Damage during installation or dismantling
- അനധികൃത പരിഷ്കാരങ്ങൾ
- Power surges or electrical fires
- വാട്ടർ എക്സ്പോഷർ
For technical support or further inquiries, please visit the official BETAFPV webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി ബന്ധപ്പെടുക.
