VTOMAN X4

എയർ കംപ്രസർ യൂസർ മാനുവൽ ഉള്ള VTOMAN X4 ജമ്പ് സ്റ്റാർട്ടർ

Model: X4 (JS-507)

1. ആമുഖം

Thank you for choosing the VTOMAN X4 Jump Starter with Air Compressor. This device is designed to provide reliable emergency jump-starting for 12V vehicles, inflate tires, and serve as a portable power bank and LED light source. To ensure a safe and optimal user experience, please read this manual carefully before operation and keep it for future reference.

This unit is for vehicles (equipment) with 12V batteries. It may be dangerous if used with other types of batteries. Read and understand all safety information before use. Failure to follow safety instructions may cause damage to the jump starter, and may also result in electric shock, explosions, fire, property damage, and personal injury.

2. സുരക്ഷാ മുന്നറിയിപ്പുകൾ

Failure to follow these safety instructions may result in electric shock, explosion, fire, property damage, or personal injury.

  • Always read this user manual carefully before using the machine.
  • Do not allow people without proper knowledge or ability to operate the device without supervision.
  • Do not use this unit as a toy. Keep it away from children.
  • This unit works for vehicles (equipment) with 12V batteries only. Do not use for vehicles with non-12V batteries or other machines like airplanes and ships.
  • ഏതെങ്കിലും കേബിൾ ഉണ്ടെങ്കിൽ ഈ യൂണിറ്റ് ഉപയോഗിക്കരുത്, clamp, or cord is damaged, or if the unit is overheated, swelled, or leaking fluid.
  • Do not use it as a vehicle battery or a battery charger.
  • Do not use the unit to start a vehicle while charging its internal battery.
  • ബാറ്ററി cl മാത്രം ഉപയോഗിക്കുകamps provided to start a vehicle and the qualified charger to charge this unit.
  • Do not over-discharge the unit (don't let the battery run out); charge it regularly, ideally every 3 months.
  • Make sure the blue plug of the jumper cable is fully inserted into the battery clamps output port to prevent melting.
  • Ensure battery terminals are clean and clamps are well connected before starting. Dirty or corroded terminals will decrease output power.
  • Do not start the product more than three consecutive times. This may cause overheating and damage. If multiple starts are needed, wait two minutes between each start-up.
  • ജമ്പ് സ്റ്റാർട്ടറിന്റെ cl ബന്ധിപ്പിക്കരുത്amps to the battery reversely after pressing the "BOOST" button to avoid accidents.
  • Use this unit to start the vehicle only when the battery power is more than 2 bars.
  • Do not recharge this product immediately after starting a vehicle; let it cool for 30 minutes first.
  • ഉൽപ്പന്നം വെള്ളത്തിൽ മുക്കരുത്.
  • Do not operate this product in an explosive environment.
  • Do not modify or disassemble this machine. Only service technicians can repair it.
  • ഉൽപന്നം കടുത്ത ചൂടിലേക്കോ തീയിലോ കാണിക്കരുത്.
  • Do not drop or squeeze the device. If damaged, inspect by a qualified battery technician.
  • താപനില 60°C/140°F കവിയാൻ സാധ്യതയുള്ള സ്ഥലങ്ങളിൽ സൂക്ഷിക്കരുത്.
  • Only charge at ambient temperatures of -10~45°C/14~113°F.
  • In case of liquid leak, do not handle with bare hands. Wash skin immediately with soap and water. If liquid touches eyes, rinse for at least 10 minutes and seek medical help.
  • Dispose of the device according to local regulations at the end of its service life or if it leaks liquid.
10 Smart Safety Protection icons

VTOMAN's 10 Smart Safety Protections: Over-Charge, Short-Circuit, Smart-AI, Spark-Proof, Reverse-Polarity, Over-Current, Over-Discharge, High-Temperature, Over-Voltage, Reverse-Charge.

VTOMAN's Unique Chip Technology for Safety

ആന്തരികം view of the VTOMAN X4 showing the unique chip technology for safety protection.

Extreme Temperature Operation Range

The VTOMAN X4 operates reliably in extreme temperatures from -20°C to 60°C (-4°F to 140°F).

3. പാക്കേജ് ഉള്ളടക്കം

എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കാൻ, രസീത് ലഭിക്കുമ്പോൾ പാക്കേജ് ഉള്ളടക്കങ്ങൾ പരിശോധിക്കുക:

#ഭാഗത്തിൻ്റെ പേര്അളവ്
1Host (VTOMAN X4 Jump Starter)1
2പമ്പ് ട്യൂബ്1
3യുഎസ്ബി-സി കേബിൾ1
4ചുമക്കുന്ന ബാഗ്1
5സ്മാർട്ട് ജമ്പർ കേബിൾ1
6എയർ നോസൽ5
7ഉപയോക്തൃ മാനുവൽ1
Contents of the VTOMAN X4 package, including the jump starter, cables, nozzles, and carrying bag.

Visual representation of the VTOMAN X4 package contents.

4. ഉൽപ്പന്നം കഴിഞ്ഞുview പ്രവർത്തനങ്ങളും

The VTOMAN X4 is a versatile 4-in-1 device integrating a jump starter, tire inflator, power bank, and LED light.

VTOMAN X4 product with key features: 10000mAh Battery Capacity, 2500A Peak Current.

VTOMAN X4 Jump Starter with key specifications.

4.1. ഉൽപ്പന്ന ഭാഗങ്ങളുടെ വിവരണം

Diagram of VTOMAN X4 showing parts: Jump start socket, LCD Display, Power switch, Pressure increase/decrease buttons, Setting button, Light switch, Aerated port, USB-C Input, LED Flash Light, USB-A Output.

Detailed diagram of the VTOMAN X4 highlighting its various parts and ports.

  • ജമ്പ് സ്റ്റാർട്ട് സോക്കറ്റ്: സ്മാർട്ട് ജമ്പർ കേബിളുകൾ ബന്ധിപ്പിക്കുന്നതിന്.
  • LCD ഡിസ്പ്ലേ: Shows battery level, preset tire pressure, and units (BAR, PSI, KPA).
  • വൈദ്യുതി സ്വിച്ച്: Turns the unit on/off and checks battery power.
  • മർദ്ദം കൂട്ടൽ/കുറയ്ക്കൽ ബട്ടണുകൾ: Adjusts the preset tire pressure value.
  • ക്രമീകരണ ബട്ടൺ: Switches between pumping objects and pressure units.
  • ലൈറ്റ് സ്വിച്ച്: LED ഫ്ലാഷ്‌ലൈറ്റ് മോഡുകൾ നിയന്ത്രിക്കുന്നു.
  • Aerated Port: For connecting the pump tube for inflation.
  • USB-C 5V/2A Input Port: For charging the X4 unit.
  • LED ഫ്ലാഷ് ലൈറ്റ്: Provides illumination with Normal, Strobe, and SOS modes.
  • USB-A 5V/2.1A Output Port: For charging external USB devices.

5. Charging the VTOMAN X4

Before first use, or if the battery is low, ensure the X4 is fully charged.

  1. Connect the provided USB-C cable to the USB-C Input Port on the X4.
  2. Connect the other end of the USB-C cable to a compatible 5V/2A wall charger (not included).
  3. The LCD display will show the battery icon blinking, indicating charging is in progress. The bars will advance from bottom to top.
  4. Charging is complete when the battery icon shows 4 solid bars. A full charge takes approximately 6-8 hours with a 5V/2A charger.

Note: It is recommended to recharge the unit every 3 months to maintain battery health, especially if not in regular use.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

6.1. Checking Battery Power

Press the power button once to check the current battery level on the LCD display.

ബാറ്ററി ഐക്കൺ0 ബാർ1 ബാർ2 ബാറുകൾ3 ബാറുകൾ4 ബാറുകൾ
ബാറ്ററി പവർ0%25%50%75%100%

The battery icon will blink one by one during charging. When fully charged, the icon will show 4 solid bars.

6.2. Jump Starting a 12V Vehicle

Important: Ensure the X4 has more than 2 bars of battery power before attempting to jump start. Do not press the "BOOST" button on the jumper cable before connecting to the vehicle battery correctly.

  1. Insert the blue end of the smart jumper cable into the jump start socket on the X4. Ensure the indicator on the clip is off.
  2. ചുവന്ന cl കണക്റ്റുചെയ്യുകamp (+) വാഹന ബാറ്ററിയുടെ പോസിറ്റീവ് ടെർമിനലിലേക്കും കറുത്ത cl യിലേക്കുംamp (-) to the negative terminal of the vehicle battery. Ensure connections are secure and clean.
  3. Observe the indicator light on the smart jumper cable:
    • സോളിഡ് ഗ്രീൻ ലൈറ്റ്: Indicates a correct connection and sufficient power. Proceed to start the vehicle.
    • മിന്നുന്ന പച്ച വെളിച്ചം: വാഹന ബാറ്ററി വോളിയം സൂചിപ്പിക്കുന്നുtage is too low. Press the "BOOST" button on the jumper cable. Once the light turns solid green, start the vehicle within 30 seconds.
    • Solid Red Light (with beeping): Indicates a reverse polarity connection. Disconnect immediately and reconnect correctly. Once the light turns solid green, proceed.
    • വെളിച്ചമില്ല: May indicate a completely damaged vehicle battery. Ensure connections are correct, then press the "BOOST" button. Once the light turns solid green, start the vehicle within 30 seconds.
  4. നിങ്ങളുടെ വാഹനത്തിന്റെ എഞ്ചിൻ സ്റ്റാർട്ട് ചെയ്യുക.
  5. Once the vehicle has started, remove the smart jumper clamps from the car battery within 30 seconds. First remove the black clamp, then the red clamp.
Four-step visual guide for vehicle starting operation: 1. Insert jumper cable, 2. Connect to car battery, 3. Start engine, 4. Remove clips.

ഒരു വാഹനം ജമ്പ് സ്റ്റാർട്ട് ചെയ്യുന്നതിനുള്ള ഘട്ടം ഘട്ടമായുള്ള ഗൈഡ്.

Caution: Do not start the product for more than three consecutive times. Wait at least two minutes between each start-up to prevent overheating.

6.3. Using the Air Inflator

The X4 features a built-in 150PSI air compressor for inflating tires and other inflatables.

  1. Connect the pump tube to the Aerated Port on the X4 and attach the appropriate air nozzle to the item you wish to inflate.
  2. Touch the power switch button for 2 seconds to turn on the unit. The LCD display will show the current product power, preset tire pressure value, and units (BAR, PSI, KPA).
  3. To select the pumping object (e.g., car, motorcycle, bicycle, basketball), click the setting button.
  4. Use the "+" or "-" buttons to adjust the desired air pressure value.
  5. To switch between pressure units (BAR, PSI, KPA), long press the setting button.
  6. Short press the power button to start the pump. The pump will automatically stop once the preset pressure value is reached.
  7. Short press the power button again to turn off the pump manually if needed.
VTOMAN X4 inflating a car tire, showing preset pressure values for car, motorcycle, bicycle, and basketball modes.

The X4's cordless tire inflator with preset pressure values for various items.

Preset Tire Pressure Value (Reference)കാർ ടയറുകൾമോട്ടോർസൈക്കിൾ മോഡ്സൈക്കിൾ മോഡ്ബാസ്കറ്റ്ബോൾ മോഡ്
മൂല്യ ശ്രേണി2.3-2.5 ബാർ1.8-2.8 ബാർ30-65 പി.എസ്.ഐ.7-9 പി.എസ്.ഐ.

6.4. എൽഇഡി ഫ്ലാഷ്‌ലൈറ്റ് ഉപയോഗിക്കുന്നു

The X4 includes a 100-lumen LED flashlight with three modes:

  1. Press the Light Switch button once to turn on the LED light in Normal mode.
  2. Press the button again to cycle through Strobe mode.
  3. SOS മോഡ് സജീവമാക്കാൻ ബട്ടൺ മൂന്നാം തവണയും അമർത്തുക.
  4. Press the button a fourth time to turn off the flashlight.
VTOMAN X4 LED light showing SOS, Normal, and Strobe modes.

The 100-lumen LED light offers three modes for various situations.

6.5. Using as a Portable Power Bank

The 10000mAh battery can charge your USB-powered devices.

  1. Connect your device's USB charging cable to the USB-A 5V/2.1A Output Port on the X4.
  2. X4 നിങ്ങളുടെ ഉപകരണം സ്വയമേവ ചാർജ് ചെയ്യാൻ തുടങ്ങും.
  3. The unit supports 36 hours of high-brightness lighting when used as a power bank for lighting.
VTOMAN X4 acting as a 10000mAh power bank, charging a smartphone and tablet via USB-A and USB-C ports.

The VTOMAN X4 functions as a 10000mAh power bank with USB-A (5V/2.1A) and USB-C (5V/2A) ports.

Note: The X4 cannot charge other devices while simultaneously jump-starting a vehicle.

6.6. Turning the Unit On/Off

  • To turn on: Press and hold the Power Switch button for two seconds.
  • To turn off: Press and hold the Power Switch button for two seconds.
  • Automatic Shut-off: If the device is not in use, it will automatically shut down after 30 seconds to conserve battery.
  • Automatic Shut-off (low current): When charging devices that require a light charging current (e.g., headphones, smartwatches) below 200mA, the unit may automatically turn off after 30 seconds due to a minimum load current limitation.

7. പരിപാലനം

  • പതിവ് റീചാർജ്ജിംഗ്: To prolong battery life, recharge the X4 every 3 months, even if not in use. Do not let the battery run out completely.
  • വൃത്തിയാക്കൽ: Keep the unit and its ports clean and free from dust and debris.
  • സംഭരണം: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. Do not store in places where the temperature may exceed 60°C/140°F. The ideal charging ambient temperature is -10~45°C/14~113°F.

8. ട്രബിൾഷൂട്ടിംഗ് (പതിവ് ചോദ്യങ്ങൾ)

Q1: ഈ യൂണിറ്റിന്റെ പ്രവർത്തന താപനില എന്താണ്, അത് എങ്ങനെ സംഭരിക്കാം?

A: This unit uses a lithium polymer battery. The operating temperature range is -20°C to 60°C (-4°F to 140°F). If the ambient temperature is higher than 60°C/140°F, the internal construction of the battery cells may be damaged, causing it to swell and become unsafe. Therefore, do not store the device in a vehicle parked in hot weather for long periods of time.

Q2: What should I do if this unit can't start a vehicle?

A: Recharge this unit fully. Ensure the blue plug of the jumper cable is fully inserted. Connect the clamps correctly to the vehicle battery. If the LED indicator is flashing green (low voltage), press the "BOOST" button on the jumper cable. Once the LED indicator illuminates a steady green light, attempt to start the vehicle within 30 seconds. If it still does not work, please contact support@vtoman.com (attach your order ID).

Q3: What should I do if this unit can't charge up?

A: Charge it with a USB-C cable and a 5V/2A wall charger for a full overnight period. If it still does not work, please contact support@vtoman.com (attach your order ID).

Q4: What should I do if this unit can't charge other devices?

A: Try to charge the device with another charging cable. If it works, the provided charging cable may be defective, and we can provide a new one. If it still does not work, please email us at support@vtoman.com (attach your order ID).

Q5: ഈ യൂണിറ്റ് ചാർജ് ചെയ്യുമ്പോൾ മറ്റ് ഉപകരണങ്ങൾ ചാർജ് ചെയ്യാൻ കഴിയുമോ?

ഉ: അതെ.

Q6: ഒരു വാഹനം സ്റ്റാർട്ട് ചെയ്യുമ്പോൾ ഈ ഉൽപ്പന്നത്തിന് മറ്റ് ഉപകരണങ്ങൾ ചാർജ് ചെയ്യാൻ കഴിയുമോ?

ഉ: ഇല്ല.

Q7: Why does it shut off in 30s when charging other devices?

A: This unit may shut off automatically when charging devices that need a light charging current (such as headphones, smartwatches) because there is a minimum load current limitation (200mA) on this unit. It will automatically turn off after 30 seconds if the load current is less than 200mA.

9 സാങ്കേതിക സവിശേഷതകൾ

ഫീച്ചർസ്പെസിഫിക്കേഷൻ
മോഡൽX4 (JS-507)
ബാറ്ററി ശേഷി10000mAh / 37Wh / 3.7V
കറൻ്റ് ആരംഭിക്കുന്നു400 എ (3 എസ്)
പീക്ക് കറൻ്റ്2500എ
എഞ്ചിൻ അനുയോജ്യത8.5 ലിറ്റർ ഗ്യാസ് / 6.0 ലിറ്റർ ഡീസൽ വരെ
Max Pressure (Air Pump)150പിഎസ്ഐ
USB-C ഇൻപുട്ട്5V/2A
യുഎസ്ബി-എ put ട്ട്‌പുട്ട്5V/2.1A
പ്രവർത്തന താപനില-20°C മുതൽ 60°C വരെ (-4°F മുതൽ 140°F വരെ)
ബാറ്ററി സൈക്കിൾ ലൈഫ്1000-ലധികം തവണ
മുഴുവൻ ചാർജ്ജ് സമയം6-8 hours (with 5V/2A Charger)
ലൈറ്റിംഗ് മോഡ്Lighting / SOS mode / Strobing
അളവുകൾ (ഏകദേശം)7.48 in x 4.59 in (190mm x 116.6mm)
ബാഹ്യ പരിശോധന സർട്ടിഫിക്കേഷൻMSDS, ROHS, FCC, CE, UL
Detailed specifications table and dimensions diagram for the VTOMAN X4.

Dimensions and technical specifications of the VTOMAN X4.

9.1. വിഷവും ഹാനികരവുമായ പദാർത്ഥങ്ങൾ

The product complies with environmental standards regarding hazardous substances:

പദാർത്ഥംപിബി (ലീഡ്)Hg (മെർക്കുറി)സിഡി (കാഡ്മിയം)Cr(VI) (ഹെക്‌സാവാലന്റ് ക്രോമിയം)PBB (Polybrominated Biphenyls)PBDE (Polybrominated Diphenyl Ethers)
ഉള്ളടക്കം000000

0: Indicates that the content of harmful substances in all homogeneous materials is below the prescribed limit of MCV (standard 2002/95/EC/RoHS).

10 ഉപയോക്തൃ നുറുങ്ങുകൾ

  • For optimal performance, always ensure the unit is fully charged before long trips or storing it for extended periods.
  • When inflating tires, remember to preset the desired pressure. The auto-shutoff feature is very convenient and prevents over-inflation.
  • If your car battery is completely dead, use the "BOOST" function on the smart jumper cable for a quicker start.
  • ബാറ്ററി cl ആയി സൂക്ഷിക്കുകamps clean to ensure a good connection and efficient power transfer.
  • The built-in LED light is useful in dark conditions, especially the SOS mode for emergencies.

11. വാറണ്ടിയും ഉപഭോക്തൃ പിന്തുണയും

11.1. Warranty Includes

  • 18 മാസത്തെ ഓൺലൈൻ വിൽപ്പനാനന്തര സേവനം: Timely and effective online support for 18 months after purchase.
  • 30 ദിവസത്തെ പണം തിരികെ നൽകാനുള്ള ഗ്യാരണ്ടി: Full refund within the first 30 days for product issues.
  • 30 ദിവസം മുതൽ 18 മാസം വരെ മാറ്റിസ്ഥാപിക്കൽ: Defective units due to manufacturing issues will be replaced within 18 months.

11.2 നിരാകരണം

The warranty requires the original purchase receipt (order ID). It does not cover damage or product failures caused by normal wear and tear, physical abuse, improper installation, misuse, modification, or unauthorized third-party repairs. VTOMAN is not responsible for accidental or indirect damage caused by incorrect use or misuse of this product. All warranty claims are limited to repair or replacement of the defective product at the sole discretion of VTOMAN.

11.3. ഉപഭോക്തൃ പിന്തുണ

For any questions, technical assistance, or warranty claims, please contact VTOMAN Customer Service:

  • ഇമെയിൽ: support@vtoman.com
  • Webസൈറ്റ്: Refer to the official VTOMAN webപതിവുചോദ്യങ്ങൾക്കും കൂടുതൽ വിവരങ്ങൾക്കുമുള്ള സൈറ്റ്.
VTOMAN customer service information with email and warranty details.

VTOMAN Customer Service contact details and warranty overview.

അനുബന്ധ രേഖകൾ - X4

പ്രീview VTOMAN X1 ജമ്പ് സ്റ്റാർട്ടറും എയർ കംപ്രസ്സർ യൂസർ മാനുവലും (മോഡൽ JS-211)
VTOMAN X1 (മോഡൽ JS-211) ഉപയോക്തൃ മാനുവൽ: 2500A ജമ്പ് സ്റ്റാർട്ടറിനും 100PSI എയർ കംപ്രസ്സറിനുമുള്ള സമഗ്ര ഗൈഡ്. നിങ്ങളുടെ VTOMAN ഉപകരണത്തിന്റെ പ്രവർത്തനം, സുരക്ഷ, സവിശേഷതകൾ, സ്പെസിഫിക്കേഷനുകൾ എന്നിവയെക്കുറിച്ച് അറിയുക.
പ്രീview എയർ കംപ്രസർ യൂസർ മാനുവൽ ഉള്ള VTOMAN X7 ജമ്പ് സ്റ്റാർട്ടർ
12V വാഹനങ്ങൾക്കായുള്ള ശക്തവും വൈവിധ്യമാർന്നതുമായ പോർട്ടബിൾ ഉപകരണമായ എയർ കംപ്രസ്സറുള്ള VTOMAN X7 ജമ്പ് സ്റ്റാർട്ടർ കണ്ടെത്തൂ. ഈ ഉപയോക്തൃ മാനുവൽ അതിന്റെ സമാനതകളില്ലാത്ത സ്റ്റാർട്ടപ്പ് പ്രകടനം, ഇന്റലിജന്റ് ഡിജിറ്റൽ ടയർ ഇൻഫ്ലേറ്റർ, 5.1-ഇഞ്ച് സ്മാർട്ട് ഡിസ്പ്ലേ, ഒന്നിലധികം സുരക്ഷാ പരിരക്ഷകൾ, തെർമൽ ഡിസൈൻ എന്നിവയെക്കുറിച്ചുള്ള വിശദമായ നിർദ്ദേശങ്ങൾ നൽകുന്നു. അതിന്റെ ജമ്പ്-സ്റ്റാർട്ടിംഗ്, ടയർ ഇൻഫ്ലേഷൻ, പവർ ബാങ്ക് പ്രവർത്തനങ്ങൾ എന്നിവ എങ്ങനെ ഉപയോഗിക്കാമെന്നും പൊതുവായ പ്രശ്നങ്ങൾ പരിഹരിക്കാമെന്നും ഒപ്റ്റിമൽ പ്രകടനത്തിനും വിപുലീകൃത സേവന ജീവിതത്തിനും ഉപകരണം എങ്ങനെ പരിപാലിക്കാമെന്നും മനസ്സിലാക്കുക. കാറുകൾ, എസ്‌യുവികൾ, ട്രക്കുകൾ, ബോട്ടുകൾ എന്നിവയ്ക്ക് അനുയോജ്യം.
പ്രീview VTOMAN X1 പോർട്ടബിൾ ജമ്പ് സ്റ്റാർട്ടർ ഉപയോക്തൃ മാനുവൽ
സുരക്ഷാ മുൻകരുതലുകൾ, ജമ്പ്-സ്റ്റാർട്ടിംഗ് നടപടിക്രമങ്ങൾ, ഉപകരണ ചാർജിംഗ്, സ്പെസിഫിക്കേഷനുകൾ എന്നിവയുൾപ്പെടെ VTOMAN X1 പോർട്ടബിൾ ജമ്പ് സ്റ്റാർട്ടറും പവർ ബാങ്കും പ്രവർത്തിപ്പിക്കുന്നതിനുള്ള നിർദ്ദേശങ്ങൾ ഈ ഉപയോക്തൃ മാനുവൽ നൽകുന്നു.
പ്രീview VTOMAN V7 ജമ്പ് സ്റ്റാർട്ടർ ഉപയോക്തൃ മാനുവൽ
VTOMAN V7 ജമ്പ് സ്റ്റാർട്ടറിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, ഘടകങ്ങൾ, പ്രവർത്തനങ്ങൾ, പ്രവർത്തന മാർഗ്ഗനിർദ്ദേശം, ചാർജിംഗ് നിർദ്ദേശങ്ങൾ, ട്രബിൾഷൂട്ടിംഗ്, സാങ്കേതിക സവിശേഷതകൾ, വാറന്റി, സുരക്ഷാ മുൻകരുതലുകൾ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview എയർ കംപ്രസർ യൂസർ മാനുവൽ ഉള്ള VTOMAN X5 ജമ്പ് സ്റ്റാർട്ടർ
എയർ കംപ്രസ്സറുള്ള VTOMAN X5 ജമ്പ് സ്റ്റാർട്ടറിനായുള്ള ഉപയോക്തൃ മാനുവൽ, അതിന്റെ ഘടകങ്ങൾ, പ്രവർത്തനങ്ങൾ, പ്രവർത്തനം, സാങ്കേതിക സവിശേഷതകൾ, പതിവുചോദ്യങ്ങൾ, ട്രബിൾഷൂട്ടിംഗ്, അറ്റകുറ്റപ്പണികൾ എന്നിവ വിശദമാക്കുന്നു.
പ്രീview VTOMAN V8 പ്രോ ജമ്പ് സ്റ്റാർട്ടർ യൂസർ മാനുവൽ (മോഡൽ Epower-130)
VTOMAN V8 Pro ജമ്പ് സ്റ്റാർട്ടറിനായുള്ള (മോഡൽ Epower-130) വിശദമായ ഉപയോക്തൃ ഗൈഡ്. അതിന്റെ സവിശേഷതകൾ, അത് എങ്ങനെ ചാർജ് ചെയ്യാം, ഒരു വാഹനം ജമ്പ് സ്റ്റാർട്ട് ചെയ്യാം, അതിന്റെ വിവിധ ഔട്ട്‌പുട്ട് പോർട്ടുകൾ ഉപയോഗിക്കുക, സുരക്ഷാ മുൻകരുതലുകൾ മനസ്സിലാക്കുക എന്നിവയെക്കുറിച്ച് അറിയുക. സ്പെസിഫിക്കേഷനുകൾ, പതിവുചോദ്യങ്ങൾ, പാക്കേജ് ഉള്ളടക്കങ്ങൾ എന്നിവ ഉൾപ്പെടുന്നു.