EPOMAKER G84

EPOMAKER G84 VIA 80% ലേഔട്ട് ഹോട്ട്-സ്വാപ്പ് ഗാസ്കറ്റ്-മൗണ്ടഡ് വയർലെസ് മെക്കാനിക്കൽ കീബോർഡ് യൂസർ മാനുവൽ

മോഡൽ: G84

ബ്രാൻഡ്: EPOMAKER

1. ആമുഖം

The EPOMAKER G84 is an 80% layout mechanical keyboard designed for a premium typing and gaming experience. It features tri-mode connectivity (wired, 2.4GHz wireless, and Bluetooth 5.0), hot-swappable switches, gasket-mounted design with 5-layer sound dampening, and customizable RGB backlighting. This manual provides essential information for setting up, operating, and maintaining your G84 keyboard.

2. പാക്കേജ് ഉള്ളടക്കം

Upon unboxing your EPOMAKER G84 keyboard, please ensure all the following items are present:

  • EPOMAKER G84 Keyboard
  • യുഎസ്ബി കേബിൾ (വയർഡ് കണക്ഷനും ചാർജിംഗിനും)
  • ഉപയോക്തൃ മാനുവൽ
  • കീക്യാപ് പുള്ളർ
  • 2.4Ghz വയർലെസ് റിസീവർ
Contents of the EPOMAKER G84 keyboard box, including the keyboard, USB cable, user manual, keycap puller, and 2.4GHz receiver.
Figure 1: EPOMAKER G84 Package Contents (Black Keyboard shown)
Contents of the EPOMAKER G84 keyboard box, including the keyboard, USB cable, user manual, keycap puller, and 2.4GHz receiver.
Figure 2: EPOMAKER G84 Package Contents (White Keyboard shown)
Contents of the EPOMAKER G84 keyboard box, including the keyboard, USB cable, user manual, keycap puller, and 2.4GHz receiver.
Figure 3: EPOMAKER G84 Package Contents (Pink Keyboard shown)
Video 1: EPOMAKER G84 Unboxing and Typing Sound Demonstration

3. സജ്ജീകരണവും കണക്റ്റിവിറ്റിയും

3.1 പ്രാരംഭ സജ്ജീകരണം

  1. Unpack the keyboard and all accessories.
  2. Adjust the keyboard's typing angle using the two-stage adjustable feet on the underside.
Image illustrating the adjustable typing angles of the G84 keyboard: No Kick-Stand (3.3cm, 5.4°), Low Kick-Stand (4cm, 8.1°), High Kick-Stand (4.6cm, 10.4°).
Figure 4: Adjustable Typing Angles

3.2 ട്രൈ-മോഡ് കണക്റ്റിവിറ്റി

The G84 supports three connection modes: Wired (USB-C), 2.4GHz Wireless, and Bluetooth 5.0. A mode switch is located on the keyboard to select your preferred connection type.

Image showing the G84 keyboard connected to various devices (Windows, Apple, Linux, Tablets, Laptops, PC, Phone) highlighting Tri-Mode Wireless connectivity.
Figure 5: Tri-Mode Wireless Connectivity

3.2.1 വയേർഡ് മോഡ്

Connect the keyboard to your device using the provided USB-C cable. The keyboard will automatically switch to wired mode and begin charging.

3.2.2 2.4GHz വയർലെസ് മോഡ്

  1. Locate the 2.4GHz wireless receiver (often stored under a kickstand on the keyboard's underside).
  2. നിങ്ങളുടെ ഉപകരണത്തിൽ ലഭ്യമായ USB പോർട്ടിലേക്ക് റിസീവർ പ്ലഗ് ചെയ്യുക.
  3. Switch the keyboard to 2.4GHz mode using the mode switch. The keyboard should connect automatically.

3.2.3 ബ്ലൂടൂത്ത് 5.0 മോഡ്

  1. മോഡ് സ്വിച്ച് ഉപയോഗിച്ച് കീബോർഡ് ബ്ലൂടൂത്ത് മോഡിലേക്ക് മാറ്റുക.
  2. On your device, search for Bluetooth devices and select 'EPOMAKER G84' to pair.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 അടിസ്ഥാന കീബോർഡ് പ്രവർത്തനങ്ങൾ

The G84 features an 80% QWERTY ANSI US Layout with 84 keys. All standard keyboard functions operate as expected. The keyboard supports N-Key Rollover (NKRO) and anti-ghosting for accurate and reliable input during fast typing or gaming.

Image illustrating NKRO (N-Key Rollover) and Anti-Ghosting features of the G84 keyboard, showing multiple keys being pressed simultaneously without ghosting.
Figure 6: NKRO and Anti-Ghosting

4.2 RGB ബാക്ക്‌ലൈറ്റ് നിയന്ത്രണം

The G84 features per-key RGB backlighting with shine-through PBT keycaps. You can customize the lighting effects using keyboard shortcuts or the VIA software.

Close-up of the G84 keyboard showcasing dynamic RGB backlight and shine-through double-shot PBT keycaps with Cherry Profile.
Figure 7: Dynamic RGB Backlight

Common RGB shortcuts include:

  • FN + \: Toggle Color
  • FN + END: Adjust LOGO Light
  • FN + PGUP/PGDN: Adjust Saturation
  • FN + ബാക്ക്‌സ്‌പേസ്: Toggle Light Effect

4.3 പ്രോഗ്രാമബിലിറ്റി വഴി

The EPOMAKER G84 is VIA programmable, allowing for advanced customization of key assignments, macros, and lighting effects. To use VIA, you will need to download the VIA software and the specific JSON file for the G84 model from the EPOMAKER webസൈറ്റ്.

Screenshot of the Epomaker G84 VIA JSON download page, indicating QMK/VIA customizability.
Figure 8: VIA Software Interface Example

5. പരിപാലനം

5.1 കീബോർഡ് വൃത്തിയാക്കൽ

നിങ്ങളുടെ കീബോർഡിന്റെ രൂപഭാവവും പ്രവർത്തനക്ഷമതയും നിലനിർത്താൻ:

  • Use a soft, lint-free cloth to wipe down the keycaps and case.
  • For deeper cleaning, you can remove keycaps using the provided keycap puller and clean underneath with compressed air or a small brush.
  • കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.

5.2 ഹോട്ട്-സ്വാപ്പബിൾ സ്വിച്ചുകൾ

The G84 features hot-swappable sockets, allowing you to change switches without soldering. This supports both 3-pin and 5-pin mechanical switches.

Image demonstrating hot-swappable switches, plate-mounted stabilizers, south-facing backlight RGB LEDs, and magnetic linear switches.
ചിത്രം 9: ഹോട്ട്-സ്വാപ്പബിൾ സ്വിച്ച് മെക്കാനിസം

ഒരു സ്വിച്ച് മാറ്റിസ്ഥാപിക്കാൻ:

  1. കീക്യാപ്പ് പുള്ളർ ഉപയോഗിച്ച് കീക്യാപ്പ് സൌമ്യമായി നീക്കം ചെയ്യുക.
  2. സ്വിച്ച് അതിന്റെ സോക്കറ്റിൽ നിന്ന് ശ്രദ്ധാപൂർവ്വം പുറത്തെടുക്കാൻ ഒരു സ്വിച്ച് പുള്ളർ (എല്ലായ്പ്പോഴും ഉൾപ്പെടുത്തിയിട്ടില്ല, പക്ഷേ ശുപാർശ ചെയ്യുന്നു) ഉപയോഗിക്കുക.
  3. Align the pins of the new switch with the holes in the PCB and press firmly until it clicks into place. Ensure pins are not bent.
  4. കീക്യാപ്പ് മാറ്റിസ്ഥാപിക്കുക.

6. പ്രശ്‌നപരിഹാരം

6.1 കണക്റ്റിവിറ്റി പ്രശ്നങ്ങൾ

  • വയർഡ് കണക്ഷൻ പ്രവർത്തിക്കുന്നില്ല: Ensure the USB-C cable is securely connected to both the keyboard and your device. Try a different USB port or cable.
  • 2.4GHz Wireless Not Connecting: Make sure the 2.4GHz receiver is properly plugged in and the keyboard is switched to 2.4GHz mode. Try re-pairing by unplugging and re-plugging the receiver.
  • Bluetooth Not Pairing/Connecting: Ensure the keyboard is in Bluetooth mode and discoverable. Remove any previous G84 pairings from your device's Bluetooth settings and try pairing again. Ensure your device's Bluetooth is enabled.

6.2 RGB Backlight Problems

  • ലൈറ്റുകൾ ഓണാക്കുന്നില്ല: Check if the keyboard is powered on and charged. Use the RGB shortcuts (e.g., FN + \) to cycle through modes or turn the backlight on/off.
  • Incorrect Colors/Effects: Use the VIA software to reset or reconfigure your RGB settings.

6.3 കീകൾ പ്രതികരിക്കുന്നില്ല

  • പ്രത്യേക കീകൾ: If only a few keys are not responding, the switches might be faulty or improperly seated. Try hot-swapping the affected switches with known working ones.
  • Multiple Keys/Anti-Ghosting: The G84 supports NKRO. If you experience ghosting or missed inputs, ensure your operating system drivers are up to date.

6.4 ബാറ്ററി ലൈഫ്

The G84 has a 4000mAh battery. Battery life is approximately 15 hours with RGB backlight on and up to 400 hours with RGB backlight off.

Image showing the G84 keyboard with RGB backlight on, and battery life indicators: 15 hours with RGB on, 400 hours with RGB off.
Figure 10: Battery Life Indicators

If battery life is significantly shorter than expected, ensure the keyboard is fully charged. Excessive use of high brightness RGB or continuous wireless usage can reduce battery life.

7 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർസ്പെസിഫിക്കേഷൻ
ബ്രാൻഡ്എപോമേക്കർ
മോഡൽG84
ലേഔട്ട്80% QWERTY ANSI US ലേഔട്ട്
കീകളുടെ എണ്ണം84 കീകൾ
ബാറ്ററി4000mAh
ബാറ്ററി ലൈഫ്15 hours (backlight on), 400 hours (backlight off)
കണക്റ്റിവിറ്റിCable Wired (USB-C), 2.4GHz Wireless, Bluetooth 5.0
അനുയോജ്യതMac/WIN/Android/PS4/5/Xbox
കീബോർഡ് അളവുകൾ34.4cm (Length) x 14.6cm (Width)
Keyboard Height (Spacebar side)1.9 സെ.മീ
Keyboard Height (F1-F12 side)3.3cm (No Kick-Stand), 4cm (Low Kick-Stand), 4.6cm (High Kick-Stand)
കേസ് മെറ്റീരിയൽപ്ലാസ്റ്റിക്
പ്ലേറ്റ് മെറ്റീരിയൽപിസി പ്ലേറ്റ്
ഫ്ലെക്സ്-കട്ട്Yes (both plate and PCB)
സ്റ്റെബിലൈസറുകൾPlate-Mount Stabilizer
മൗണ്ടിംഗ് ഘടനഗാസ്കറ്റ്-മൗണ്ട്
ശബ്ദം ഡിampeningPoron Sandwich Foam, IXPE Switch Pad, Sound Enhancement Pad, Poron Switch Socket Pad, Bottom Silicone
കീക്യാപ്സ് പ്രോfileചെറി പ്രോfile
കീക്യാപ്സ് മെറ്റീരിയൽPBT കീക്യാപ്സ്
കീക്യാപ്സ് നിർമ്മാണ സാങ്കേതികവിദ്യഇരട്ട-ഷോട്ട്
ചൂടുള്ള സ്വാപ്പബിൾYes, with 3/5-pin Mechanical Switches
RGBSouth-facing, Per-Key RGB
ബാക്ക്ലൈറ്റ്Yes, with shine-through keycaps
പോളിംഗ് നിരക്ക്1000Hz (USB, 2.4Ghz), 125Hz (ബ്ലൂടൂത്ത് 5.0)
ലേറ്റൻസി2ms (USB), 2ms (2.4Ghz വയർലെസ്), 15ms (ബ്ലൂടൂത്ത് 5.0)
ആൻ്റി-ഗോസ്റ്റിംഗ്എൻ-കീ റോൾഓവർ
ഭാരം0.9 കിലോ

7.1 സ്വിച്ച് സ്പെസിഫിക്കേഷനുകൾ

Image displaying specifications for EPOMAKER Clear Switch and EPOMAKER Creamy Jade Switch.
Figure 11: EPOMAKER Switch Specifications
ഫീച്ചർEPOMAKER Transparent SwitchEPOMAKER Creamy Jade Switch
സ്വിച്ച് തരം5-pin Mechanical, Linear, Pre-Lubed5-pin Mechanical, Linear, Pre-Lubed
ട്രിഗർ ഫോഴ്സ്32±5gf45±5gf
ബോട്ടം-ഔട്ട് ഫോഴ്‌സ്നൽകിയിരിക്കുന്ന ഡാറ്റയിൽ വ്യക്തമാക്കിയിട്ടില്ല50±5gf
പ്രീ-ട്രാവൽ1.9 ± 0.4 മിമി2.0 ± 0.4 മിമി
മൊത്തം യാത്ര3.7 ± 0.3 മിമി3.6 ± 0.4 മിമി
പ്രധാന കേസ്PCനൽകിയിരിക്കുന്ന ഡാറ്റയിൽ വ്യക്തമാക്കിയിട്ടില്ല
താഴെയുള്ള കേസ്PCനൽകിയിരിക്കുന്ന ഡാറ്റയിൽ വ്യക്തമാക്കിയിട്ടില്ല
തണ്ട്PCനൽകിയിരിക്കുന്ന ഡാറ്റയിൽ വ്യക്തമാക്കിയിട്ടില്ല
ലൈറ്റ് ഡിഫ്യൂസർലൈറ്റ് ഡിഫ്യൂസർ ഇല്ലലൈറ്റ് ഡിഫ്യൂസർ ഇല്ല

8 ഉപയോക്തൃ നുറുങ്ങുകൾ

  • ഇഷ്‌ടാനുസൃതമാക്കൽ: Leverage the VIA software for advanced key remapping, macro creation, and lighting customization to personalize your typing experience.
  • ബാറ്ററി മാനേജ്മെൻ്റ്: To maximize battery life, consider turning off the RGB backlight when not needed, especially during extended wireless use.
  • കേസ് മെറ്റീരിയൽ: The G84 keyboard features a plastic case, which contributes to its overall weight and acoustic properties.

9. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or further assistance with your EPOMAKER G84 keyboard, please refer to the official EPOMAKER webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുക. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.


EPOMAKER G84 ഹോട്ട്-സ്വാപ്പ് ഗാസ്കറ്റ്-മൗണ്ടഡ് വയർലെസ് മെക്കാനിക്കൽ കീബോർഡ് അൺബോക്‌സിംഗും സവിശേഷതകളും

EPOMAKER G84 ഹോട്ട്-സ്വാപ്പ് ഗാസ്കറ്റ്-മൗണ്ടഡ് വയർലെസ് മെക്കാനിക്കൽ കീബോർഡ് അൺബോക്‌സിംഗും സവിശേഷതകളും

0:24 • 720×1280 • അൺബോക്സിംഗ്