EDUP EP-AB023

EDUP EP-AB023 2.4GHz WiFi Booster Instruction Manual

Model: EP-AB023 | Brand: EDUP

1. ആമുഖം

The EDUP EP-AB023 is a high-power 2.4GHz WiFi booster designed to extend the range and improve the signal quality of your wireless network. It is compatible with IEEE 802.11b/g/n Wireless LAN devices and offers a significant boost in signal strength, making it ideal for home use to enhance connectivity and eliminate dead zones.

2. പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

  • EDUP AB023 WiFi Booster Unit
  • 2 x ബാഹ്യ ആന്റിനകൾ
  • Various Connection Cables (pigtails, USB power cable)
Contents of the EDUP AB023 package
Figure 1: Contents of the EDUP AB023 package, including the booster unit, two external antennas, and various connection cables.

3. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

The EDUP AB023 is designed for plug-and-play operation, requiring no software installation. Follow these steps to set up your WiFi booster:

  1. വൈദ്യുതി വിതരണം: The booster does not come with a power supply. You will need a 12V/1A power supply, a 5V portable charger (power bank), or a compatible battery. Ensure the power source is within the 5V-16V operating input range. The power socket is a 2.5*0.7mm DC connector.
  2. Connect to Router/Access Point: Use the appropriate cable (pigtail) to connect your wireless router or access point to the "TO AP1" (to access point) port on the booster. The RF connector for input is SMA-K.
  3. ആൻ്റിനകൾ ബന്ധിപ്പിക്കുക: Attach the two external antennas to the "TO ANTI" (to antenna) ports on the booster. The RF connector for output is RP-SMA-K.
  4. പവർ ഓൺ: Connect the chosen power supply to the booster.
  5. പ്രവർത്തനം സ്ഥിരീകരിക്കുക: Observe the LED indicators. A green LED indicates the transmitter is active, and a red LED indicates the receiver is active.

പ്രധാന കുറിപ്പ്: Please ensure the input trigger power from your router/access point is within the specified range (Min: 3dBm, Max: 20dBm). Excessive power may damage the equipment or cause malfunction.

Wiring diagram for EDUP AB023 WiFi Booster
Figure 2: Detailed wiring diagram for connecting the EDUP AB023 WiFi Booster to a wireless router/access point and antennas.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once properly set up, the EDUP AB023 will automatically begin boosting your 2.4GHz WiFi signal. It works with devices adhering to IEEE 802.11b, 802.11g, and 802.11n wireless standards.

  • സിഗ്നൽ മെച്ചപ്പെടുത്തൽ: The booster amplifies your existing WiFi signal, extending coverage and improving link quality by up to 50 times the power.
  • LED സൂചകങ്ങൾ:
    • പച്ച എൽഇഡി: Indicates the booster is transmitting data.
    • ചുവന്ന LED: Indicates the booster is receiving data.
EDUP AB023 WiFi Booster with LED indicators
ചിത്രം 3: കോണാകൃതിയിലുള്ളത് view of the EDUP AB023 WiFi Booster, showing the connection ports and LED indicators.

5. പരിപാലനം

To ensure optimal performance and longevity of your EDUP AB023 WiFi Booster, follow these maintenance guidelines:

  • പരിസ്ഥിതി വ്യവസ്ഥകൾ: Operate the device within the specified temperature range of -30℃ to +70℃ and humidity up to 95% relative humidity. Avoid extreme temperatures and high moisture environments.
  • വൃത്തിയാക്കൽ: Gently wipe the exterior of the booster with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • വെൻ്റിലേഷൻ: Ensure the booster is placed in a location with adequate airflow to prevent overheating.
  • കേബിൾ കണക്ഷനുകൾ: Periodically check all cable connections to ensure they are secure.

6. പ്രശ്‌നപരിഹാരം

If you encounter issues with your EDUP AB023 WiFi Booster, refer to the following troubleshooting tips:

  • No Power/Device Not Turning On:
    • Ensure the power supply is correctly connected to the 2.5*0.7mm DC socket.
    • Verify that the power supply provides 5V-16V DC and at least 1A.
    • Check if the power outlet or power bank is functioning correctly.
  • No Signal Boost/Poor Performance:
    • Confirm that the booster is correctly connected between your router/access point and the antennas as per the wiring diagram.
    • Ensure the antennas are securely attached to the "TO ANTI" ports.
    • Check the LED indicators: Green for transmitting, Red for receiving. If no LEDs are active, recheck power and connections.
    • Verify that your router/access point is operating on the 2.4GHz frequency band and is compatible with 802.11b/g/n standards.
    • Ensure the input trigger power from your router/access point is within the recommended range (Min: 3dBm, Max: 20dBm) to prevent malfunction or damage.
    • Relocate the booster and antennas to a position with fewer obstructions for better signal propagation.

7 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
മോഡലിൻ്റെ പേര്EP-AB023
ബ്രാൻഡ് നാമംEDUP
ടൈപ്പ് ചെയ്യുകWireless Booster
ഫ്രീക്വൻസി റേഞ്ച്2400-2500MHz (2.4 GHz)
ഓപ്പറേറ്റിംഗ് വോളിയംtage5-16V
Receiving Gain18dB ± 1
Transmission Gain18dB ± 1
Max Output Power (P1dB)36dBm (4W)
Input Trigger PowerMin: 3dBm, Max: 23dBm (Recommended Max: 20dBm for safe operation)
ഇ.വി.എം3%@28dBm 802.11g 54Mbps OFDM 64QAM BW 20MHz
നോയ്സ് ചിത്രംD 2.5dB
നിലവിലെ വിതരണം580mA@Pout 28dBm 12V
TX/RX Switch Time Delay<1 us
LED സൂചകംTransmitter: Green; Receiver: Red
പ്രവർത്തന താപനില-30℃~+70℃
സംഭരണ ​​താപനില-40℃~+150℃
പ്രവർത്തന ഹ്യുമിഡിറ്റിUp to 95% rel. humidity
RF Connector (Input)എസ്എംഎ-കെ
RF Connector (Output)ആർപി-എസ്എംഎ-കെ
പവർ സോക്കറ്റ്2.5*0.7mm DC
ഷെൽ വലുപ്പം65*61*12(മില്ലീമീറ്റർ)
ഷെൽ മെറ്റീരിയൽഅലുമിനിയം
മൊത്തം ഭാരം0.12 കി
വയർലെസ് ട്രാൻസ്മിഷൻ നിരക്ക്1800M (Note: This is a theoretical maximum rate; actual speeds may vary based on network conditions and connected devices.)
പിന്തുണ മെഷ്പിന്തുണയ്ക്കുന്നില്ല
ആൻ്റിന തരംExternal (The booster unit utilizes external antennas for signal transmission and reception.)
ശുപാർശ ചെയ്യുന്ന ഉപയോഗങ്ങൾവീട്
വയർലെസ് കമ്മ്യൂണിക്കേഷൻ സ്റ്റാൻഡേർഡ്Wi-Fi 802.11b, Wi-Fi 802.11g, Wi-Fi 802.11n
ഫ്രീക്വൻസി ബാൻഡ് ക്ലാസ്സിംഗിൾ-ബാൻഡ് (2.4 GHz)
മോഡം ഫംഗ്ഷനോടുകൂടിഇല്ല
ഉത്ഭവംമെയിൻലാൻഡ് ചൈന
സർട്ടിഫിക്കേഷൻCE, FCC, RoHS

8. വാറൻ്റിയും പിന്തുണയും

EDUP is committed to providing quality products and customer satisfaction.

  • ഉൽപ്പന്ന വാറൻ്റി: All EDUP products come with a 1-year warranty from the date of purchase.
  • മടങ്ങുന്നു: You may return the product within 7 days if you encounter any quality problems. Products ordered from China come with a 75-day money-back guarantee.
  • ഉപഭോക്തൃ പിന്തുണ: For any inquiries or assistance, please contact our customer support. All messages will be answered within 24 working hours.

9 ഉപയോക്തൃ നുറുങ്ങുകൾ

നൽകിയിരിക്കുന്നതിൽ നിന്ന് പ്രത്യേക ഉപയോക്തൃ നുറുങ്ങുകളൊന്നും ലഭ്യമായിരുന്നില്ല.viewഈ ഉൽപ്പന്നത്തിനായുള്ള ചോദ്യോത്തര ഉള്ളടക്കം.

അനുബന്ധ രേഖകൾ - EP-AB023

പ്രീview EDUP 300M WiFi Signal Repeater Quick Installation Guide
Step-by-step guide to installing and configuring the EDUP 300M WiFi Signal Repeater (EP-2911S) to extend your wireless network. Includes setup, troubleshooting, and FCC information.
പ്രീview EDUP USB വൈഫൈ അഡാപ്റ്റർ ഇൻസ്റ്റലേഷൻ ഗൈഡും ഉപയോഗവും
EDUP USB വൈഫൈ അഡാപ്റ്ററുകൾക്കായുള്ള സമഗ്രമായ ഇൻസ്റ്റാളേഷൻ ഗൈഡ്, Windows 7, Windows 10, Windows XP, Mac OS എന്നിവയ്ക്കുള്ള സജ്ജീകരണങ്ങൾ ഇതിൽ ഉൾപ്പെടുന്നു. ട്രബിൾഷൂട്ടിംഗ് നുറുങ്ങുകളും ഡ്രൈവർ ഡൗൺലോഡ് വിവരങ്ങളും ഉൾപ്പെടുന്നു.
പ്രീview EDUP EP-AC1633 USB വൈഫൈ അഡാപ്റ്റർ ദ്രുത ഇൻസ്റ്റലേഷൻ ഗൈഡ്
വിൻഡോസ് സിസ്റ്റങ്ങളിൽ EDUP EP-AC1633 USB വൈഫൈ അഡാപ്റ്റർ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനുള്ള ഘട്ടം ഘട്ടമായുള്ള ഗൈഡ്, FCC, IC കംപ്ലയൻസ് വിവരങ്ങൾ ഉൾപ്പെടെ.
പ്രീview EDUP EP-AC1686 USB വയർലെസ് അഡാപ്റ്റർ ദ്രുത ഇൻസ്റ്റലേഷൻ ഗൈഡ്
Step-by-step guide to install and connect the EDUP EP-AC1686 USB Wireless Adapter using REALTEK drivers on Windows 7 and compatible systems.
പ്രീview EDUP WIFI 6 AX1800 USB വയർലെസ് അഡാപ്റ്റർ 8832BU ദ്രുത ഇൻസ്റ്റലേഷൻ ഗൈഡ്
EDUP WIFI 6 AX1800 USB വയർലെസ് അഡാപ്റ്റർ (മോഡൽ 8832BU) ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും Wi-Fi നെറ്റ്‌വർക്കുകളിലേക്ക് കണക്റ്റുചെയ്യുന്നതിനുമുള്ള ഘട്ടം ഘട്ടമായുള്ള ഗൈഡ്. ഡ്രൈവർ ഇൻസ്റ്റാളേഷൻ നിർദ്ദേശങ്ങളും Wi-Fi കണക്ഷൻ ഘട്ടങ്ങളും ഉൾപ്പെടുന്നു.
പ്രീview EDUP EP-AC1689 USB വയർലെസ് അഡാപ്റ്റർ ദ്രുത ഇൻസ്റ്റലേഷൻ ഗൈഡ്
EDUP EP-AC1689 USB വയർലെസ് അഡാപ്റ്റർ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും ബന്ധിപ്പിക്കുന്നതിനുമുള്ള ഘട്ടം ഘട്ടമായുള്ള ഗൈഡ്. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ, നെറ്റ്‌വർക്ക് കണക്ഷൻ, FCC പാലിക്കൽ വിവരങ്ങൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.