EDUP AB022 Dual Band WiFi Booster Instruction Manual

1. ആമുഖം

The EDUP AB022 is a high-power dual-band WiFi booster designed to extend the range and improve the signal quality of your existing wireless LAN devices. It operates on both 2.4GHz and 5.8GHz frequencies, providing up to 4W (36dBm) of output power to significantly enhance your WiFi coverage. This device is ideal for outdoor applications and works with certified IEEE 802.11a/n Wireless LAN devices.

Figure 1: EDUP AB022 Dual Band WiFi Booster with included antennas.

2. ബോക്സിൽ എന്താണുള്ളത്?

പാക്കേജിലെ ഉള്ളടക്കങ്ങൾ ശ്രദ്ധാപൂർവ്വം പരിശോധിക്കുക. എന്തെങ്കിലും ഇനങ്ങൾ നഷ്ടപ്പെട്ടാലോ കേടുപാടുകൾ സംഭവിച്ചാലോ, നിങ്ങളുടെ റീട്ടെയിലറെ ബന്ധപ്പെടുക.

• 1 x EDUP AB022 Dual Band WiFi Booster Unit
• 2 x ആന്റിന
• 2 x Short RF Cables (SMA-K to RP-SMA-K, for connecting booster to router/AP)
• 2 x Longer RF Cables (SMA-K to RP-SMA-K, for connecting booster to external antennas, if applicable)
• 1 x യുഎസ്ബി പവർ കേബിൾ

Figure 2: Package contents of the EDUP AB022.

3. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

The EDUP AB022 is designed for simple plug-and-play operation, requiring no software installation. Follow these steps to set up your WiFi booster:

1. വൈദ്യുതി വിതരണം: The booster does not come with a power supply. You will need to provide one of the following:
   • A 12V/1A power adapter.
   • A 5V portable charger (power bank).
   • A compatible battery.
   Connect the chosen power supply to the booster unit using the provided USB power cable or a compatible DC power cable (2.5*0.7mm DC socket).
2. Connect to Router/Access Point (AP):
   • Identify the antenna ports on your WiFi router or access point.
   • Connect the short RF cables from the "TO AP1" ports on the booster unit to the corresponding antenna ports on your router/AP. Ensure a secure connection.
3. ആൻ്റിനകൾ ബന്ധിപ്പിക്കുക:
   • Attach the provided antennas directly to the "TO ANT1" ports on the booster unit.
   • Alternatively, if using external antennas, connect the longer RF cables from the "TO ANT1" ports on the booster unit to your external antennas.
4. പവർ ഓൺ: Once all connections are secure, power on the booster unit.

Important Note on Power Input:

Ensure the input trigger power from your router/AP to the booster is within the specified range: Minimum 3dBm, Maximum 20dBm. Using excessive power may damage the equipment or cause it to malfunction.

Figure 3: Wiring Diagram for EDUP AB022 Booster.

The diagram illustrates the connection for both 2.4GHz and 5.8GHz channels. Each channel has a "TO AP" port for connecting to your Access Point/Router and a "TO ANT" port for connecting to the antenna.

4. ഓപ്പറേഷൻ

Once properly installed and powered on, the EDUP AB022 will automatically begin boosting your WiFi signal. It works by amplifying both the transmit and receive signals of your wireless devices, extending their range and improving connection stability.

LED സൂചകങ്ങൾ:

• ട്രാൻസ്മിറ്റർ (TX): A green LED indicates that the booster is actively transmitting a signal.
• റിസീവർ (RX): A red LED indicates that the booster is actively receiving a signal.

These indicators help confirm that the booster is functioning correctly in both directions.

5 സ്പെസിഫിക്കേഷനുകൾ

പൊതുവായ ഉൽപ്പന്ന സവിശേഷതകൾ:

5.8GHz Channel Parameters:

2.4GHz Channel Parameters:

6. പരിപാലനം

• വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the booster unit. Do not use liquid cleaners or aerosol sprays.
• പരിസ്ഥിതി: Ensure the booster is operated within the specified temperature and humidity ranges to prevent damage.
• കണക്ഷനുകൾ: Periodically check all cable connections to ensure they are secure and free from damage.

7. പ്രശ്‌നപരിഹാരം

• No Power/LEDs Off:
  • പവർ സപ്ലൈ ശരിയായി ബന്ധിപ്പിച്ചിട്ടുണ്ടെന്നും നിർദ്ദിഷ്ട വോളിയം നൽകുന്നുണ്ടെന്നും ഉറപ്പാക്കുക.tagഇ (5-16V).
  • വൈദ്യുതി വിതരണം പ്രവർത്തിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കുക.
• Poor Signal Improvement:
  • Check all RF cable connections between the booster, router/AP, and antennas. Loose connections can degrade performance.
  • Ensure the input trigger power from your router/AP is within the 3dBm to 20dBm range. Input power outside this range can cause malfunction or damage.
  • Confirm that your router/AP is transmitting a strong enough signal for the booster to amplify effectively.
  • Adjust antenna positioning for optimal signal reception and transmission.
• Booster Malfunction/Damage:
  • If the booster exhibits unusual behavior or stops working, immediately check the input power. Excessive input power (above 20dBm) can burn out the equipment.
  • കേടുപാടുകൾ സംശയിക്കുന്നുവെങ്കിൽ, ഉപയോഗം നിർത്തി പിന്തുണയുമായി ബന്ധപ്പെടുക.

8 ഉപയോക്തൃ നുറുങ്ങുകൾ

• ഒപ്റ്റിമൽ പ്ലേസ്മെൻ്റ്: For best results, place the booster in a central location between your router/AP and the area where you need improved WiFi coverage. Avoid obstructions like thick walls or metal objects.
• ആന്റിന ഓറിയന്റേഷൻ: Experiment with the orientation of the antennas to find the best signal strength.
• പവർ സ്രോതസ്സ് വഴക്കം: Utilize a power bank for temporary outdoor setups or in locations without easy access to a wall outlet, leveraging the 5V operating voltagഇ അനുയോജ്യത.

9. വാറൻ്റിയും പിന്തുണയും

The EDUP AB022 WiFi Booster comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For technical support or warranty inquiries, please contact your retailer or the EDUP Official Store directly.