Serpent X20 RC Car RTR On-Road 2.4GHz Electric RC Car 4WD Instruction Manual

1. ആമുഖം

Congratulations on your purchase of the Serpent X20 RC Car RTR (Ready-to-Race). This 1/10 scale electric touring car is designed for on-road racing and recreational use, featuring a 4WD system and a powerful brushless motor set. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure you get the most out of your new RC car.

Note: For safety reasons, transmitter batteries (4 x AA) and a car battery (Lipo 4000mAh or more) are not included and need to be purchased separately.

2 സുരക്ഷാ വിവരങ്ങൾ

Please read and understand all safety warnings before operating the RC car. Failure to do so may result in injury or damage to the product.

• പ്രായം ശുപാർശ: This product is not suitable for children under 14 years of age. Adult supervision is required for younger users.
• ബാറ്ററി സുരക്ഷ: Use only recommended LiPo batteries (4000mAh or more) and ensure proper charging and handling. Never overcharge or discharge batteries. Store batteries in a safe, fireproof location.
• പ്രവർത്തന പരിസ്ഥിതി: Operate the RC car in open, clear areas away from people, pets, and obstacles. Avoid public roads, crowded areas, and wet conditions.
• ഇലക്ട്രിക്കൽ ഘടകങ്ങൾ: Keep all electrical components dry. Water can damage the electronics and cause malfunctions.
• ചലിക്കുന്ന ഭാഗങ്ങൾ: Keep fingers, hair, and loose clothing away from moving parts such as wheels, gears, and belts to prevent injury.
• ചൂട്: The motor and ESC can become very hot during operation. Avoid touching them immediately after use.

3. പാക്കേജ് ഉള്ളടക്കം

Your Serpent X20 RTR package includes the following items:

• 1/10 Scale Serpent X20 RC Car (pre-assembled)
• Dragon-RC DTS-3 2.4GHz Transmitter
• Dragon-RC Receiver DRS-3 2.4GHz
• Dragon-RC Speedo DX-10 WP 45A ESC with fan
• Dragon-RC Motor DL-10 brushless 13.5T 3450kv
• Dragon-RC digital servo 0.13s - 6kg
• പ്രവർത്തന നിർദ്ദേശങ്ങൾ
• ഒറിജിനൽ ബോക്സ്

4 സ്പെസിഫിക്കേഷനുകൾ

പ്രധാന സവിശേഷതകൾ:

• ചേസിസ്: Super narrow, symmetrical, durable carbon chassis plate with optimized flex design.
• Topdeck: Durable carbon topdeck with optimized flex design. Battery-mount brackets and Lipo-holders allow the battery tape to run over instead of under the chassis. Holders can be reversed for other battery positions.
• Bumper / Bodymount: Large foam front bumper captured by an upper and lower nylon bumper. Front bodymount is mounted through the front bumper, and rear ones are seated on the shocktower.
• സ്പൂൾ: Front nylon lightweight spool with screw mounted front gearpully.
• Transmission / Belts / Pulleys: Smooth low friction fine pitch belts combined with optimized nylon pulleys.
• Driveshaft / Wheel Hex / Wheel Axle: Steel driveshafts, combined with ballraced wheel axles and nylon wheel-hex adaptors.
• Gear-Diff: Very compact ballraced gear differential in the rear, with steel gears and axles for durability.
• മോട്ടോർ മൗണ്ട്: Machined aluminium motor mount / middle schaft support. Ball raced middle shaft with 2 small pulleys and the main Serpent spur gear.
• ഷോക്ക് അബ്സോർബറുകൾ: Latest type competition shock absorbers with membranes and checked color-coded race springs.
• ഫ്രണ്ട് സസ്പെൻഷൻ: Moulded front brackets, with belt tension adjusting through excenters. Durable lower rear wishbones connected pivot balls to the chassis. An anti-roll bar system can be mounted as option.
• പിൻ സസ്പെൻഷൻ: Moulded rear brackets.
• Shocktower Front/Rear: Black nylon shocktower with 2 upper shock mounting holes to choose from. The rear body post is mounted to the top of the rear shocktower.
• സ്റ്റിയറിംഗ് സിസ്റ്റം: Optimized Ackermann for neutral steering-feeling.
• Tyres-Wheels: Fitted with Dragon-RC rubber racing tyres with foam inlays on Serpent TC wheels for super-grip.
• ശരീരം: EFRA approved 1/10 scale Serpent TC body Lex-is fitted, fully pre-cut and prepainted in a superb paintjob (Orange-Red-Blue-Green).

5. സജ്ജീകരണ ഗൈഡ്

5.1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

1. ട്രാൻസ്മിറ്റർ ബാറ്ററികൾ: Open the battery compartment on the Dragon-RC DTS-3 2.4GHz Transmitter. Insert 4 x AA batteries, ensuring correct polarity. Close the compartment.
2. Car Battery (LiPo):
   

   

   
   Carefully place your charged LiPo battery (4000mAh or more, not included) into the designated battery tray on the chassis. Secure it using the provided nylon battery tape holder. The holders allow the tape to run over the chassis.
3. ബാറ്ററി ബന്ധിപ്പിക്കുക: Connect the LiPo battery to the Electronic Speed Controller (ESC). Ensure the connectors are firmly seated.

5.2. Body Shell Installation

1. Place the pre-painted body shell over the chassis, aligning the body posts with the holes in the body.
2. Secure the body with the body clips on each post.

5.3 പ്രാരംഭ പരിശോധനകൾ

• സ്റ്റിയറിംഗ്: Turn the steering wheel on the transmitter. The front wheels of the car should turn left and right. Adjust the steering trim on the transmitter if the wheels are not centered.
• ത്രോട്ടിൽ: Gently pull the throttle trigger on the transmitter. The motor should respond.
• ഞെട്ടലുകൾ: Press down on each corner of the car to check the shock absorbers. They should compress and rebound smoothly.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

6.1. പവർ ഓൺ/ഓഫ്

1. ആദ്യം ട്രാൻസ്മിറ്റർ ഓണാക്കുക.
2. ESC-യിലെ പവർ ബട്ടൺ അമർത്തി RC കാർ ഓണാക്കുക.
3. To power off, turn off the RC car first, then turn off the transmitter.

6.2. അടിസ്ഥാന നിയന്ത്രണങ്ങൾ

• സ്റ്റിയറിംഗ് വീൽ: Turn left or right to control the direction of the car.
• ത്രോട്ടിൽ ട്രിഗർ: Pull to accelerate forward. Push to brake or reverse.

6.3. ഡ്രൈവിംഗ് നുറുങ്ങുകൾ

• നിയന്ത്രണങ്ങൾ സാവധാനം അനുഭവിച്ചറിയാൻ തുടങ്ങുക.
• തുറസ്സായ സ്ഥലത്ത് സ്റ്റിയറിംഗ്, ത്രോട്ടിൽ നിയന്ത്രണം പരിശീലിക്കുക.
• The 4WD system provides excellent traction; experiment with different surfaces.
• Avoid driving in wet conditions or through puddles to protect electronics.
• Monitor battery levels and stop driving when power diminishes to prevent over-discharging the LiPo battery.

7. പരിപാലനം

Regular maintenance will prolong the life and performance of your RC car.

• വൃത്തിയാക്കൽ: After each use, clean the car to remove dirt, dust, and debris. Use a soft brush or compressed air. Avoid using water directly on electronics.
• ഘടകങ്ങൾ പരിശോധിക്കുന്നു: Regularly check for loose screws, damaged parts, or worn tires. Tighten screws as needed.
• ലൂബ്രിക്കേഷൻ: Apply appropriate RC lubricant to moving parts like gears and bearings as recommended by RC hobby guides.
• ബാറ്ററി കെയർ: Always store LiPo batteries at a storage voltage (around 3.8V per cell) if not used for extended periods. Never leave batteries fully charged or fully discharged.
• മോട്ടോറും ESCയും: Ensure the motor and ESC are free from obstructions and that the cooling fan (if present) is working correctly.

8. പ്രശ്‌നപരിഹാരം

ചില പൊതുവായ പ്രശ്നങ്ങളും അവയുടെ പരിഹാരങ്ങളും ഇതാ:

• Car not responding to transmitter:
  
  • Check if both the car and transmitter are powered on.
  • Ensure batteries in both the car and transmitter are charged.
  • Verify that the transmitter and receiver are properly bound (refer to transmitter manual for binding procedure).
• Car runs slowly or stops suddenly:
  
  • Battery is low; recharge or replace.
  • Motor or ESC may be overheating. Allow components to cool down.
  • Check for debris obstructing the drivetrain.
• Steering is erratic or not centered:
  
  • ട്രാൻസ്മിറ്ററിൽ സ്റ്റിയറിംഗ് ട്രിം ക്രമീകരിക്കുക.
  • Check for damage to steering linkages or servo.
• പ്രവർത്തന സമയത്ത് അസാധാരണമായ ശബ്ദങ്ങൾ:
  
  • Inspect gears for damage or foreign objects.
  • Check for loose components or bearings.

9 ഉപയോക്തൃ നുറുങ്ങുകൾ

• യന്ത്രഭാഗങ്ങൾ: If you need spare parts, it is recommended to contact the manufacturer or the seller directly for genuine components to ensure compatibility and performance.
• ബാറ്ററി ശേഷി: While the car requires a LiPo 4000mAh or more, consider higher capacity batteries for extended run times.
• ഉപരിതല വൈവിധ്യം: The X20 RTR is designed for on-road use but can handle various smooth surfaces. Be mindful of rough terrain to prevent damage.

10. വാറൻ്റിയും പിന്തുണയും

For warranty claims, technical support, or inquiries regarding spare parts, please refer to the contact information provided by your retailer or the manufacturer. Keep your proof of purchase for warranty validation.