1. ആമുഖം
The Dasqua SPC Plug Micro is a data processing box designed to connect incremental measuring tools to a computer for data acquisition and analysis. It facilitates efficient data transfer from digital calipers, micrometers, and other incremental gauges, enhancing precision measurement workflows.
2. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ
Follow these steps to set up your Dasqua SPC Plug Micro:
- Connect to Measuring Tool: Plug the micro USB end of the SPC Plug Micro cable into the data output port of your incremental measuring tool (e.g., digital caliper, micrometer).
- കമ്പ്യൂട്ടറുമായി ബന്ധിപ്പിക്കുക: Insert the standard USB end of the SPC Plug Micro cable into an available USB port on your computer.
- Power On Tool: Ensure your incremental measuring tool is powered on and ready for operation.
- Software/Driver Installation: If prompted by your operating system, install any necessary drivers for the device. You may also need specific data acquisition software compatible with your measuring tool to utilize the data output functionality. Refer to your measuring tool's documentation for software requirements.
3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once the SPC Plug Micro is correctly connected and recognized by your computer, you can begin data acquisition:
- സോഫ്റ്റ്വെയർ സമാരംഭിക്കുക: Open the data acquisition software on your computer that is compatible with your incremental measuring tool.
- Initiate Data Transfer: Depending on your measuring tool and software, data transfer can be initiated by pressing a dedicated data output button on the measuring tool or by a command within the software interface.
- Monitor Data: Observe the software interface to confirm that measurements are being received and displayed correctly.
4. പരിപാലനം
To ensure the longevity and proper functioning of your Dasqua SPC Plug Micro, follow these maintenance guidelines:
- വൃത്തിയാക്കൽ: Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
- സംഭരണം: Store the SPC Plug Micro in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.
- കൈകാര്യം ചെയ്യൽ: Handle the cable and connectors with care. Avoid bending or pulling the cable excessively, which could damage internal wiring.
- വേർപെടുത്തുക: Do not attempt to disassemble or repair the device yourself. This will void the warranty and may cause further damage.
5. പ്രശ്നപരിഹാരം
If you encounter issues with your SPC Plug Micro, refer to the following common problems and solutions:
- ഡാറ്റ കൈമാറ്റം ഇല്ല:
- Check all cable connections to ensure they are secure and fully inserted.
- Verify that your incremental measuring tool is powered on and functioning correctly.
- Ensure the correct drivers and data acquisition software are installed and properly configured on your computer.
- Try connecting the SPC Plug Micro to a different USB port on your computer.
- Restart your computer and the measuring tool.
- Consult your measuring tool's manual for specific data output instructions.
- കമ്പ്യൂട്ടർ ഉപകരണം തിരിച്ചറിയുന്നില്ല:
- Ensure the USB cable is fully inserted into both the computer and the SPC Plug Micro.
- Check your computer's Device Manager (Windows) or System Information (macOS) for any unrecognized devices and update drivers if necessary.
- Try connecting to a different computer to rule out a computer-specific issue.
6 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ഉൽപ്പന്നത്തിൻ്റെ പേര് | Dasqua SPC Plug Micro |
| അപേക്ഷ | Data processing box for incremental tools |
| ഉത്ഭവം | മെയിൻലാൻഡ് ചൈന |
| സർട്ടിഫിക്കേഷൻ | CE |
7 ഉപയോക്തൃ നുറുങ്ങുകൾ
- കാലിബ്രേഷൻ: For optimal performance and accurate measurements, ensure your incremental measuring tools are regularly calibrated. Dasqua measuring tools are manufactured to high standards and come with a Calibration Certificate.
- സോഫ്റ്റ്വെയർ അനുയോജ്യത: Always use the SPC Plug Micro with data acquisition software that is specifically compatible with your incremental measuring tool for seamless integration and reliable data logging.
- ഗുണമേന്മ: Dasqua products undergo rigorous testing, including prototype, user, abnormal, and durability tests, before mass production. A strict visual inspection is applied to every finished product to ensure quality.
8. വാറൻ്റിയും പിന്തുണയും
The Dasqua SPC Plug Micro comes with a രണ്ട് വർഷത്തെ വാറന്റി വാങ്ങിയ തീയതി മുതൽ. ഈ വാറന്റി നിർമ്മാണ വൈകല്യങ്ങൾ ഉൾക്കൊള്ളുകയും ഉൽപ്പന്നം അതിന്റെ നിർദ്ദിഷ്ട പ്രകടന മാനദണ്ഡങ്ങൾ പാലിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കുകയും ചെയ്യുന്നു.
For technical support, warranty claims, or further assistance, please contact Dasqua customer service. You may reach support via WhatsApp at +8617352882023 or email at 936442401@qq.com. Please have your purchase details and product model number ready when contacting support.
