ആമുഖം
This instruction manual provides essential information for the installation, maintenance, and optimal use of replacement parts for your Roborock Q10 VF or Q10 VF+ robot vacuum cleaner. Regular replacement and maintenance of these components are crucial for ensuring your vacuum operates at peak performance, effectively collecting dirt and debris, and maintaining a clean and hygienic home environment.
ഉൽപ്പന്നം കഴിഞ്ഞുview
This replacement kit includes a comprehensive set of accessories designed to maintain the cleaning efficiency of your Roborock Q10 VF/Q10 VF+ robot vacuum. The kit typically contains:
- പ്രധാന ബ്രഷ്: Designed for deep cleaning across various floor types.
- സൈഡ് ബ്രഷുകൾ: Enhance cleaning along edges and in corners.
- HEPA ഫിൽട്ടറുകൾ: Capture fine dust particles and allergens, improving air quality.
- മോപ്പ് തുണികൾ: For effective wet cleaning and mopping of hard floors.
- Dust Bags: Large capacity bags for convenient disposal of collected dust and debris.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
These accessories are designed for user-friendly installation and can be quickly replaced without professional assistance. Always ensure the robot vacuum is powered off before attempting any installation or replacement.
Main Brush Installation
Locate the main brush cover on the underside of your robot vacuum. Open the cover, remove the old main brush, and carefully insert the new main brush, ensuring it clicks into place. Close the cover securely.
Figure 2: Main brush replacement part. Side Brush Installation
Turn the robot vacuum over. The side brushes are typically held in place by a screw or a clip. Unscrew or unclip the old side brush and attach the new one, ensuring it is firmly secured. If screws are used, tighten them gently.
Figure 3: Side brush replacement part. HEPA ഫിൽട്ടർ മാറ്റിസ്ഥാപിക്കൽ
Open the dustbin compartment of your robot vacuum. Remove the dustbin and locate the HEPA filter. Pull out the old filter and insert the new one, ensuring it fits snugly into its slot. Reinsert the dustbin.
Figure 4: HEPA filter replacement part. Mop Cloth Attachment
If your model uses a mop cloth, attach the new mop cloth to the mop plate, typically using Velcro or by sliding it into designated slots. Ensure it is securely fastened before attaching the mop plate to the robot vacuum.
Figure 5: Mop cloth replacement part. ഡസ്റ്റ് ബാഗ് മാറ്റിസ്ഥാപിക്കൽ
Open the dust collection compartment, usually located within the charging dock or the robot itself. Remove the full dust bag and dispose of it. Insert a new dust bag, making sure it is properly seated and sealed within the compartment.
Figure 6: Dust bag replacement part.
പ്രവർത്തന പരിഗണനകൾ
Once replacement parts are installed, your Roborock Q10 VF/Q10 VF+ robot vacuum is ready to resume its cleaning tasks. The new components will restore optimal cleaning performance, ensuring efficient dirt collection and thorough floor cleaning. No specific operational steps are required for the parts themselves beyond their correct installation.
മെയിൻ്റനൻസ്
To ensure the longevity and optimal performance of your robot vacuum and its replacement parts, adhere to the following maintenance recommendations:
- പ്രധാന ബ്രഷ്: Inspect weekly for tangled hair or debris. Clean as needed. Replace every 6-12 months, or sooner if wear is visible.
- സൈഡ് ബ്രഷുകൾ: Check monthly for wear or bending. Clean off any tangled hair. Replace every 3-6 months, or if bristles are damaged.
- HEPA ഫിൽട്ടറുകൾ: Tap clean weekly to remove dust. Do not wash with water. Replace every 3-6 months, or if suction power noticeably decreases.
- മോപ്പ് തുണികൾ: Wash after each use. Replace every 1-3 months, or if they become worn or lose absorbency.
- Dust Bags: Replace when full. The frequency depends on usage and household dust levels.
Regular cleaning and timely replacement of these accessories are vital for maintaining the vacuum's suction power, cleaning efficiency, and overall operational lifespan.
ട്രബിൾഷൂട്ടിംഗ്
If you experience a decrease in cleaning performance after replacing parts, consider the following:
- കുറച്ച സക്ഷൻ: Ensure the HEPA filter is correctly installed and not clogged. Check the dust bag for fullness or improper seating.
- Ineffective Sweeping: Verify that the main brush and side brushes are free from tangles and installed correctly. Replace if bristles are worn.
- Poor Mopping: Ensure the mop cloth is clean and properly attached to the mop plate.
- അസാധാരണമായ ശബ്ദങ്ങൾ: Inspect all brushes for obstructions or damage. Ensure all parts are securely installed.
If issues persist, refer to your main Roborock Q10 VF/Q10 VF+ robot vacuum user manual or contact customer support.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| അനുയോജ്യത | Roborock Q10 VF, Roborock Q10 VF+ Robot Vacuum Cleaners |
| മെറ്റീരിയൽ | Plastic (components may vary) |
| നിറം | As Shown (typically grey/red/white) |
| പാക്കേജ് ഉള്ളടക്കം | 1 Main Brush, 2 Side Brushes, 2 HEPA Filters, 4 Dust Bags, 4 Mop Cloths |
| പാക്കേജ് അളവുകൾ (ഏകദേശം) | നീളം: 20 സെ.മീ, വീതി: 10 സെ.മീ, ഉയരം: 10 സെ.മീ |
| പാക്കേജ് ഭാരം (ഏകദേശം) | 0.21 കി.ഗ്രാം |
| ഉത്ഭവം | മെയിൻലാൻഡ് ചൈന |
ഉപയോക്തൃ ടിപ്പുകൾ
- Always keep a spare set of replacement parts on hand to ensure continuous cleaning performance without interruption.
- For households with pets, consider more frequent checks and cleaning of the main and side brushes due to increased hair accumulation.
- If your vacuum cleaner has a "filter cleaning" reminder, it's often a good time to physically inspect and clean or replace the HEPA filter.
വാറൻ്റിയും പിന്തുണയും
For any questions regarding the replacement parts, installation, or troubleshooting beyond the scope of this manual, please contact the seller or manufacturer's customer support. Keep your purchase records for any potential warranty claims.
