1. ആമുഖം
The Miboxer BS64 is a smart stair light master controller designed to automate stair lighting with advanced features. It utilizes dual PIR sensors to detect movement, automatically illuminating stairs as people pass. The system supports custom lighting patterns via a mobile application (Tuya Smart App) and can also be controlled using a 2.4G RF remote controller. This manual provides detailed instructions for the installation, operation, and maintenance of your BS64 Stair Light Master.
2. ഉൽപ്പന്നം കഴിഞ്ഞുview
2.1 പ്രധാന സവിശേഷതകൾ
- ബ്ലൂടൂത്ത് നിയന്ത്രണം: Connects to your smartphone via Bluetooth for app control (Tuya Smart App).
- 2-Wire Control: Simplified wiring for installation.
- സ്കേലബിളിറ്റി: Supports up to 64 stairs.
- ഇഷ്ടാനുസൃതമാക്കാവുന്ന ലൈറ്റിംഗ്:
- Support step time setting.
- Support delay lights-off time setting.
- Support night light brightness setting.
- Support 0-24 hours working time setting to prevent false triggering.
- 4 light sensing modes.
- Support SPI strip parameter setting, color calibration, point setting, color and brightness setting.
- Support setting the CCT (Correlated Color Temperature) and brightness of staircase lights.
- സുരക്ഷാ സവിശേഷതകൾ: Short circuit protection and anti-reverse polarity protection.
- RF നിയന്ത്രണം: Compatible with almost all Miboxer 2.4G RF remote controllers.
2.2 ഘടകങ്ങൾ
The Miboxer BS64 system typically includes the following components:
- BS64 Stair Light Master Controller: The central control unit.
- PIR Sensors (Sensor A & Sensor B): Motion detection sensors for automatic light activation.
- Stair Light Sub-device (Dual White Controller, Model: BS-L2C): Individual controllers for each stair light (sold separately).
- Stair Light T-cable: For connecting sub-devices and LED strips (sold separately).
- വൈദ്യുതി വിതരണം: DC24V (not included, must be purchased separately).
- LED സ്ട്രിപ്പുകൾ: Compatible SPI LED strips (sold separately).
3 സ്പെസിഫിക്കേഷനുകൾ
3.1 BS64 Stair Light Master Controller
| പരാമീറ്റർ | മൂല്യം |
|---|---|
| മോഡൽ നമ്പർ. | BS64 |
| ഇൻപുട്ട് വോളിയംtage | DC24V |
| ശക്തി | 480W |
| പരമാവധി. കറന്റ് ലോഡ് ചെയ്യുക | 20എ |
| ആശയവിനിമയ പ്രോട്ടോക്കോൾ | Bluetooth / 2.4GHz RF |
| Control Distance (Bluetooth) | 30മീ |
| Control Distance (2.4G RF) | 30മീ |
| Pixels Supported | 1024 |
| PIR സെൻസിംഗ് ദൂരം | 3m |
| പിന്തുണയ്ക്കുന്ന ഘട്ടങ്ങൾ | 2-64 |
| പ്രവർത്തന താപനില | -10~40℃ |
| അപ്ലിക്കേഷൻ അനുയോജ്യത | തുയ സ്മാർട്ട് ആപ്പ് |
| സർട്ടിഫിക്കേഷൻ | CE, RoHS |
| മെറ്റീരിയൽ | പ്ലാസ്റ്റിക് |
3.2 Stair Light Sub-device (Dual White Controller)
| പരാമീറ്റർ | മൂല്യം |
|---|---|
| മോഡൽ നമ്പർ. | BS-L2C |
| ഇൻപുട്ട് വോളിയംtage | DC24V |
| ഔട്ട്പുട്ട് | 1A/ചാനൽ |
| ആകെ ഔട്ട്പുട്ട് | പരമാവധി 1A |
| പ്രവർത്തന താപനില | -10~40°C |
| ഐപി നിരക്ക് | IP20 |
| ഭാരം | 1.5 ഗ്രാം |
| ഉൽപ്പന്ന വലുപ്പം | 38*8*10എംഎം |
4 സുരക്ഷാ വിവരങ്ങൾ
- ഇൻപുട്ട് വോളിയം ഉറപ്പാക്കുകtage is DC24V. Incorrect voltage can damage the device and connected lights.
- All wiring should be performed by a qualified electrician or experienced individual.
- ഇലക്ട്രിക് ഷോക്ക് തടയുന്നതിന് ഇൻസ്റ്റാളേഷൻ അല്ലെങ്കിൽ അറ്റകുറ്റപ്പണിക്ക് മുമ്പ് വൈദ്യുതി വിച്ഛേദിക്കുക.
- Do not expose the device to moisture or extreme temperatures outside its specified working range (-10~40℃).
- Ensure proper insulation for all connections.
- Do not exceed the maximum load power of 480W or current of 20A for the master controller.
- The device is rated IP20, meaning it is not protected against water. Install in dry indoor environments only.
5. ഇൻസ്റ്റലേഷനും സജ്ജീകരണവും
5.1 Wiring the Master Controller
The BS64 master controller has terminals for power input, light output, SPI output, PUSH switch, and Link button. Refer to the diagram below for correct connections.
- ഇൻപുട്ട്: Connect DC24V power supply to V+ and V- terminals.
- ഔട്ട്പുട്ട്: Connect the main power line for the stair lights to the Output V+ and V- terminals.
- SPI Output: Connect the SPI LED strip to the SPI Output terminals (GND, DATA, V+).
- PUSH GND: Connect an optional PUSH switch for manual control.
- ലിങ്ക്: Short press 'Link' 1 time to activate link mode of remote. Long press 'Link' 3 seconds, PIR sensor link is done while the light flashes 6 times slowly.
5.2 PIR Sensor Installation
Install Sensor A at the bottom of the stairs and Sensor B at the top. Ensure they have a clear line of sight for motion detection. The PIR sensing distance is 3m.
5.3 Stair Light Sub-device and T-cable Connection
The BS-L2C sub-devices are connected to the LED strips and then integrated into the main wiring using T-cables. Each sub-device controls one stair light segment.
The T-cables facilitate connection between the main power line and individual stair lights. The recommended distance between each step's light connection is 400mm, with a 250mm drop for the light itself.
5.4 Connection Diagrams by Number of Steps
The wiring configuration for the main power supply depends on the total number of steps to ensure adequate power distribution.
Option 1: Under 24 Steps (using 1.5mm² cable)
Power can be supplied from the first step or the last step.
Option 2: 25-36 Steps (using 1.5mm² cable)
Power should be supplied from the middle of the stair run.
Option 3: 37-64 Steps (using 2.5mm² cable)
Power should be supplied from the middle of the stair run, using a thicker 2.5mm² cable for increased current capacity.
6. ഓപ്പറേഷൻ
6.1 App Control (Tuya Smart App)
- Download the Tuya Smart App from your device's app store.
- നിങ്ങളുടെ സ്മാർട്ട്ഫോണിൽ ബ്ലൂടൂത്ത് പ്രവർത്തനക്ഷമമാക്കിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- Open the app and follow the instructions to add a new device. The BS64 controller should be discoverable via Bluetooth.
- Once connected, you can customize various settings:
- ഘട്ടം സമയം: Adjust the duration each step light remains on.
- Delay Lights-off Time: Set the delay before lights turn off after motion ceases.
- Night Light Brightness: Configure the brightness level for ambient lighting.
- ജോലി സമയം: Define specific hours of operation (0-24 hours) to prevent false triggering during certain periods.
- Light Sensing Modes: Select from 4 available modes for motion detection behavior.
- SPI Strip Parameters: Fine-tune settings for connected SPI LED strips, including color calibration, pixel point settings, and overall color/brightness.
- CCT and Brightness: Adjust the Correlated Color Temperature and brightness of the stair lights.
6.2 2.4G RF Remote Control
The BS64 controller is compatible with most Miboxer 2.4G RF remote controllers.
- Linking the Remote:
- Short press the 'Link' button on the BS64 controller once to enter linking mode.
- Within a few seconds, perform the linking procedure on your 2.4G RF remote (refer to your remote's manual for specific instructions, typically involving pressing a 'Link' or 'Pair' button).
- The stair lights will flash 6 times slowly to indicate successful linking.
- Once linked, use the remote to control basic functions such as turning lights on/off, adjusting brightness, or changing modes (depending on remote features).
7. പരിപാലനം
- Keep the controller and sensors clean and free from dust. Use a soft, dry cloth for cleaning.
- കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകൾ ഉപയോഗിക്കരുത്.
- Regularly check all wiring connections for tightness and signs of wear or damage.
- Ensure PIR sensors are unobstructed for optimal performance.
- Periodically check for firmware updates for the Tuya Smart App to ensure the best performance and access to new features.
8. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ലൈറ്റുകൾ കത്തുന്നില്ല. |
|
|
| Lights turning on/off randomly (false triggering). |
|
|
| ബ്ലൂടൂത്ത് വഴി ബന്ധിപ്പിക്കാൻ കഴിയില്ല. |
|
|
| റിമോട്ട് കൺട്രോൾ പ്രവർത്തിക്കുന്നില്ല. |
|
|
9 ഉപയോക്തൃ നുറുങ്ങുകൾ
- For optimal performance, ensure your DC24V power supply is stable and provides sufficient current for all connected LED strips and sub-devices.
- When planning your installation, consider the cable thickness requirements based on the number of steps to avoid voltagഇ ഡ്രോപ്പ് ചെയ്ത് സ്ഥിരമായ തെളിച്ചം ഉറപ്പാക്കുക.
- Experiment with different light sensing modes and delay times in the Tuya Smart App to find the perfect setting for your specific stair environment.
- If using a PUSH switch, ensure it is a momentary type switch connected to the PUSH GND terminals.
10. വാറൻ്റിയും പിന്തുണയും
The Miboxer BS64 Stair Light Master comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the manufacturer's customer service. Ensure you have your product model number (BS64) and a detailed description of the issue ready.