ആമുഖം
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Roborock Floor Scrubber A30, A30 Pro, or A30 Pro Combo high-speed vacuum suction brushless motor. This motor is designed as a replacement part to restore optimal performance to your floor scrubber. Please read these instructions carefully before proceeding with installation or use.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| ബ്രാൻഡ് നാമം | റോബോറോക്ക് |
| മോഡൽ നമ്പർ | A30, A30 Pro, A30 Pro Combo |
| ടൈപ്പ് ചെയ്യുക | Vacuum Cleaner Parts (Motors) |
| വാക്വം പാർട്ട് തരം | മോട്ടോറുകൾ |
| മെറ്റീരിയൽ | പ്ലാസ്റ്റിക് |
| ഉയർന്ന തലത്തിലുള്ള രാസവസ്തുക്കൾ | ഒന്നുമില്ല |
| ഉത്ഭവം | മെയിൻലാൻഡ് ചൈന |
| വാല്യംtage | DC 21.6V |
| ശക്തി | 150W |
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
This motor is a replacement component for specific Roborock floor scrubber models. Installation should be performed by individuals with appropriate technical knowledge or by following the detailed service manual for your specific Roborock floor scrubber model. Incorrect installation can lead to damage to the motor or the appliance.
General Installation Steps (Consult your device's service manual for specifics):
- സുരക്ഷ ആദ്യം: Ensure the floor scrubber is completely powered off and unplugged from any power source before beginning any installation or repair work.
- Access the Motor Compartment: Carefully disassemble the floor scrubber to gain access to the existing motor. This typically involves removing covers, screws, and possibly other components. Refer to your specific model's service manual for exact disassembly procedures.
- പഴയ മോട്ടോർ വിച്ഛേദിക്കുക: Disconnect all wiring and mounting hardware from the old motor. Note the orientation and connection points of the wires (color-coding is usually present).
- പഴയ മോട്ടോർ നീക്കം ചെയ്യുക: Once disconnected, remove the faulty motor from its housing.
- പുതിയ മോട്ടോർ സ്ഥാപിക്കുക: Place the new Roborock brushless motor into the designated compartment. Ensure it fits securely and is correctly aligned.
- വയറിംഗ് ബന്ധിപ്പിക്കുക: Reconnect the wiring to the new motor, matching the color codes and connection points observed during disconnection. Ensure all connections are firm and secure. The motor features multiple colored wires (red, black, yellow, green, blue) and a white connector, as shown in the product images.
- സുരക്ഷിത മോട്ടോർ: Fasten the new motor using the appropriate mounting hardware.
- Reassemble Scrubber: Carefully reassemble the floor scrubber, ensuring all components are correctly placed and secured.
- ടെസ്റ്റ് പ്രവർത്തനം: After reassembly, plug in the floor scrubber and perform a test run to ensure the new motor operates correctly and the appliance functions as expected.
Image: Roborock brushless motor, showing the label with specifications (DC 21.6V 150W) and multi-colored wiring for connection.
ചിത്രം: ക്ലോസ്-അപ്പ് view of the motor's wiring, highlighting the red, black, yellow, green, and blue wires with a white connector.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
As a component part, this brushless motor operates as an integral part of your Roborock Floor Scrubber. Its operation is controlled by the floor scrubber's main system. Once correctly installed, the motor will function automatically when the floor scrubber is turned on and engaged in cleaning modes requiring vacuum suction.
- Ensure the motor is securely installed before operating the floor scrubber.
- Listen for unusual noises during operation, which could indicate an issue with the motor or its installation.
- If the floor scrubber fails to provide adequate suction after motor replacement, re-check all connections and ensure no obstructions are present in the air pathways.
മെയിൻ്റനൻസ്
Brushless motors generally require less maintenance than brushed motors. However, proper care of the overall appliance will contribute to the longevity of the motor.
- വൃത്തിയായി സൂക്ഷിക്കു: Regularly clean the floor scrubber's filters and air ducts to prevent debris from entering the motor housing and causing overheating or damage.
- അമിതമായി ചൂടാക്കുന്നത് ഒഴിവാക്കുക: Do not operate the floor scrubber for extended periods if it shows signs of overheating. Ensure proper ventilation around the appliance.
- തടസ്സങ്ങൾക്കായി പരിശോധിക്കുക: Periodically check the vacuum intake and brush roll area for any large debris that could strain the motor.
- പ്രൊഫഷണൽ പരിശോധന: If you notice a significant drop in performance or unusual noises, consider having the appliance inspected by a qualified technician.
ട്രബിൾഷൂട്ടിംഗ്
If your Roborock Floor Scrubber experiences issues after motor replacement, consider the following common troubleshooting steps:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| മോട്ടോർ ആരംഭിക്കുന്നില്ല | Incorrect wiring connection; Power supply issue; Faulty main control board | Verify all wire connections are secure and correct. Check the floor scrubber's power supply. Consult a technician if the issue persists. |
| ദുർബലമായ സക്ഷൻ പവർ | Air leak in system; Clogged filters/ducts; Motor not reaching full speed | Check for proper sealing of all components. Clean or replace filters. Ensure no obstructions in air paths. |
| മോട്ടോറിൽ നിന്നുള്ള അസാധാരണമായ ശബ്ദം | Debris in motor; Loose mounting; Bearing wear | Disassemble and inspect for foreign objects. Ensure motor is securely mounted. If noise persists, motor may require replacement. |
| മോട്ടോർ അമിതമായി ചൂടാക്കുന്നു | Blocked airflow; Excessive load; Internal motor fault | Clear all air vents and ducts. Reduce load on the floor scrubber. If overheating continues, the motor may be faulty. |
ഉപയോക്തൃ ടിപ്പുകൾ
- When replacing the motor, take photos of the original wiring before disconnecting to ensure correct reassembly.
- Always use genuine replacement parts to ensure compatibility and optimal performance.
- Regularly clean your floor scrubber's filters and water tanks to maintain overall efficiency and reduce strain on the motor.
വാറൻ്റിയും പിന്തുണയും
For warranty information regarding this replacement motor, please refer to the terms and conditions provided by your original point of purchase or the manufacturer's official website. For technical support or service inquiries, please contact Roborock customer service or an authorized service center.
