VGR V-997 Barber Clippers Instruction Manual

ആമുഖം

Thank you for choosing the VGR V-997 Barber Clippers. This professional hair trimmer is designed for precise and efficient hair cutting, offering both wet and dry haircut capabilities. Please read this manual thoroughly before using the device to ensure safe and optimal performance. Keep this manual for future reference.

Figure 1: VGR V-997 Hair Trimmer

ഉൽപ്പന്നം കഴിഞ്ഞുview

The VGR V-997 is a high-quality hair trimmer featuring ceramic and DLC coated blades, a powerful vector motor, and a convenient LED display. It is designed for professional and home use.

പാക്കേജ് ഉള്ളടക്കം

Figure 2: VGR V-997 Hair Trimmer and Accessories

• VGR V-997 Hair Trimmer
• Oil (x1)
• ചീപ്പ് (x1)
• ടൈപ്പ്-സി യുഎസ്ബി ചാർജിംഗ് കേബിൾ (x1)
• ക്ലീനിംഗ് ബ്രഷ് (x1)
• Guide Combs (x3: 1mm, 3mm, 5mm)
• ഇൻസ്ട്രക്ഷൻ മാനുവൽ

പ്രധാന സവിശേഷതകൾ

• Ceramic and DLC Coated Blades: For fast, smooth, and precise cutting.
• Vector Motor: Provides low noise, fast rotation speed (8000-11000 RPM), and long service life, enhancing cutting efficiency.
• LED ഡിസ്പ്ലേ: ബാറ്ററി ശതമാനം കാണിക്കുന്നുtage ഉം ചാർജിംഗ് സൂചനയും.
• USB ചാർജിംഗ്: Convenient Type-C charging with a 2500 mAh Lithium battery.
• നീണ്ട ബാറ്ററി ലൈഫ്: Up to 120 minutes of working time on a full charge (approx. 1.5 hours charging time).
• ബഹുമുഖ ഉപയോഗം: Suitable for wet and dry haircuts.
• ക്രമീകരിക്കാവുന്ന നീളങ്ങൾ: Includes 1mm, 3mm, and 5mm guide combs for various styles.

സജ്ജമാക്കുക

പ്രാരംഭ ചാർജിംഗ്

Before first use, fully charge the trimmer. Connect the Type-C USB charging cable to the trimmer and a suitable USB power adapter (not included). The LED display will indicate the charging status. A full charge takes approximately 1.5 hours and provides up to 120 minutes of working time.

Figure 3: USB Charging and Battery Information

Attaching Guide Combs

To adjust the cutting length, select one of the provided guide combs (1mm, 3mm, or 5mm). Align the comb with the trimmer blade and push it firmly until it clicks into place. To remove, gently pull the comb away from the blade.

Figure 4: Guide Combs for Length Adjustment

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

ഓൺ/ഓഫ് ചെയ്യുന്നു

Press the ON/OFF button (refer to Figure 2) to turn the trimmer on. Press it again to turn it off.

മുടി മുറിക്കൽ

1. ട്രിമ്മർ പൂർണ്ണമായി ചാർജ്ജ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
2. Attach the desired guide comb for your preferred hair length. For a closer trim (less than 0.5mm), use without a guide comb.
3. For best results, ensure hair is clean and dry, or slightly damp for wet haircuts.
4. Hold the trimmer with the blades facing the hair.
5. Start trimming from the bottom of the head and work upwards, moving against the direction of hair growth.
6. Use smooth, even strokes. Do not apply excessive pressure.
7. Regularly clear trimmed hair from the blades during use to maintain performance.

Vector Motor Performance

Figure 5: Vector Motor Technology

The VGR V-997 is equipped with a powerful vector motor that automatically adjusts its speed based on hair density. This ensures consistent cutting performance, even through thick hair, while maintaining low noise levels and extending the device's lifespan.

മെയിൻ്റനൻസ്

ബ്ലേഡുകൾ വൃത്തിയാക്കുന്നു

1. ട്രിമ്മർ ഓഫ് ചെയ്ത് പവർ സ്രോതസ്സിൽ നിന്ന് വിച്ഛേദിക്കുക.
2. Use the provided cleaning brush to remove any loose hair from the blades.
3. For a more thorough cleaning, the blades can be rinsed under running water (ensure the trimmer body is not submerged if not explicitly waterproof).
4. Allow the blades to air dry completely before reattaching or storing.

ബ്ലേഡുകളിൽ എണ്ണയിടുന്നു

After every few uses, or if the trimmer's performance decreases, apply a small drop of the included lubricating oil to the blades. Turn the trimmer on for a few seconds to distribute the oil evenly. This helps maintain blade sharpness and smooth operation.

ബാറ്ററി കെയർ

• Do not expose the trimmer to extreme temperatures.
• ട്രിമ്മർ തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത് സൂക്ഷിക്കുക.
• If storing for an extended period, charge the battery to about 50% to prolong its lifespan.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

ചിത്രം 6: വിശദമായ ഉൽപ്പന്ന സ്പെസിഫിക്കേഷനുകൾ

ഉപയോക്തൃ ടിപ്പുകൾ

• For a clean, sharp line, use the trimmer without a guide comb and hold it at a slight angle against the skin.
• Always start with a longer guide comb than you think you need, and gradually reduce the length if necessary.
• To achieve an even cut, pass the trimmer over the same area multiple times, changing the direction of the stroke.
• Consider using the trimmer on dry hair for initial bulk removal and then on slightly damp hair for finer detailing, if preferred.
• Regularly clean and oil the blades to prevent rust and ensure smooth operation, especially after wet use.

വാറൻ്റിയും പിന്തുണയും

VGR products are manufactured to high-quality standards. For any issues or support, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for warranty claims.

ഉൽപ്പന്ന വീഡിയോ കഴിഞ്ഞുview