1. ആമുഖം
This manual provides essential information for the installation, maintenance, and general use of your new Roborock robot vacuum cleaner front caster wheel. This omni-directional wheel is a genuine replacement part designed to ensure optimal mobility and performance for compatible Roborock models. Please read these instructions carefully before proceeding with installation or maintenance.
2. ഉൽപ്പന്നം കഴിഞ്ഞുview
The front caster wheel is a crucial component for your robot vacuum's navigation and movement. It allows the robot to pivot and move smoothly across various surfaces. This replacement part is available in two color options: Grey and Black.
Image: Roborock Front Caster Wheels (Grey and Black variants).
അനുയോജ്യമായ മോഡലുകൾ:
- റോബോറോക്ക് ക്രെവോ കർവ്
- റോബോറോക്ക് സരോസ് 10
- റോബോറോക്ക് സരോസ് 10R
- Roborock S9 MaxV
3 സ്പെസിഫിക്കേഷനുകൾ
| ആട്രിബ്യൂട്ട് | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് നാമം | റോബോറോക്ക് |
| മോഡൽ നമ്പർ അനുയോജ്യത | Q Revo Curv / Saros 10 / Saros 10R / S9 MaxV |
| ടൈപ്പ് ചെയ്യുക | വാക്വം ക്ലീനർ ഭാഗങ്ങൾ |
| വാക്വം പാർട്ട് തരം | ചക്രങ്ങൾ |
| മെറ്റീരിയൽ | മെറ്റൽ, പി.വി.സി |
| പാക്കേജ് ഭാരം | 0.1 കി.ഗ്രാം |
| പാക്കേജ് അളവുകൾ (L x W x H) | 16 സെ.മീ x 10 സെ.മീ x 10 സെ.മീ |
4. ഇൻസ്റ്റാളേഷൻ ഗൈഡ്
Follow these steps to replace the front caster wheel on your Roborock robot vacuum cleaner. Ensure the robot is powered off before beginning.
ചിത്രം: അടിവശം view of a compatible Roborock robot vacuum cleaner.
വീഡിയോ പ്രദർശനം:
Video: Step-by-step guide on replacing the front caster wheel.
ഘട്ടം ഘട്ടമായുള്ള നിർദ്ദേശങ്ങൾ:
- പവർ ഓഫ്: Ensure your robot vacuum cleaner is turned off and disconnected from its charging dock.
- Flip Over: Carefully turn the robot vacuum cleaner upside down to access its underside.
- Locate Caster Wheel: Identify the front caster wheel assembly. It is typically located at the front center of the robot.
- പഴയ വീൽ നീക്കം ചെയ്യുക: Use a small screwdriver (often a Phillips head) to unscrew the retaining screw(s) holding the caster wheel in place. Gently pull the old caster wheel assembly out.
- വൃത്തിയുള്ള പ്രദേശം: Before installing the new wheel, clean any dust, hair, or debris from the wheel housing area to ensure smooth operation.
- പുതിയ വീൽ ഇൻസ്റ്റാൾ ചെയ്യുക: Align the new caster wheel assembly with the opening and push it firmly into place.
- സുരക്ഷിത ചക്രം: Reinsert and tighten the retaining screw(s) with the screwdriver until the new wheel is securely fastened. Do not overtighten.
- ടെസ്റ്റ്: Flip the robot vacuum back over and power it on. Gently push it to ensure the new caster wheel rotates freely and the robot moves smoothly.
5. ഓപ്പറേഷൻ
Once installed, the front caster wheel operates automatically as part of your robot vacuum cleaner's navigation system. It allows the robot to steer and maneuver efficiently around your home. No specific user interaction is required for the wheel itself during operation.
6. പരിപാലനം
Regular maintenance of the front caster wheel is essential for prolonging the life of your robot vacuum and ensuring optimal performance.
- പ്രതിവാര ശുചീകരണം: Periodically remove the caster wheel (following the installation steps in reverse) and clean any accumulated hair, dust, or debris from the wheel and its axle.
- വസ്ത്രങ്ങൾ പരിശോധിക്കുക: Inspect the wheel for signs of wear, cracks, or damage. Replace the wheel if it shows significant wear or if the robot's movement becomes erratic.
- ലൂബ്രിക്കേഷൻ (ഓപ്ഷണൽ): If the wheel squeaks or does not spin freely after cleaning, a small amount of silicone-based lubricant can be applied to the axle, avoiding contact with the wheel's rolling surface.
7. പ്രശ്നപരിഹാരം
If your robot vacuum is experiencing issues related to movement, the front caster wheel might be a contributing factor.
- Robot Not Moving Straight/Stuck:
- Check if the caster wheel is clogged with hair or debris. Clean thoroughly.
- Ensure the wheel is properly seated and secured after installation.
- Inspect the wheel for damage or excessive wear that might impede its rotation.
- Squeaking Noise from Wheel:
- Clean the wheel and its housing.
- Consider applying a small amount of lubricant if cleaning does not resolve the issue.
8 ഉപയോക്തൃ നുറുങ്ങുകൾ
- പതിവ് പരിശോധന: Make it a habit to quickly check the caster wheel for hair entanglement every few cleaning cycles.
- സ്പെയറുകൾ സൂക്ഷിക്കുക: Having a spare caster wheel on hand can minimize downtime if your current one becomes damaged or excessively worn.
- സൗമ്യമായ കൈകാര്യം ചെയ്യൽ: When removing or installing the wheel, apply gentle force to avoid damaging the plastic housing or the wheel itself.
9. വാറൻ്റിയും പിന്തുണയും
For any issues not covered in this manual, or for warranty inquiries, please contact the seller or Roborock customer support. Keep your purchase receipt as proof of purchase.
