WLED ഡിജിറ്റൽ LED കൺട്രോളർ ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

This manual provides detailed instructions for the GLEDOPTO ESP32 WLED Digital LED Controller, models GL-C-017WL-D and GL-RC-001WL. This advanced controller is designed for addressable LED strips, offering versatile control options, dynamic lighting effects, and robust safety features. It is ideal for various lighting projects, from home decoration to commercial installations.

പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:

• 4-Channel Independent Output & Zoned Lighting Control: Drive and individually control up to four LED strips with segmented programming via the WLED app for multi-zone lighting effects.
• Music Sync & 100+ Dynamic Effects: A built-in microphone enables sound-reactive lighting, while the WLED app provides over 100 preloaded dynamic effects such as rainbow waves, fire flicker, and meteor trails.
• Triple-Layer Safety & Energy Efficiency: Features a 15A overcurrent protection fuse, an energy-saving relay, and a Level Shifter IC for stable signal transmission, ensuring safety and efficiency for high-power setups.
• Wireless/Wired Firmware Updates & Broad Compatibility: Supports Over-The-Air (OTA) updates via the WLED app and wired UART upgrades. Compatible with all mainstream addressable LED protocols.
• Compact & User-Friendly Design: Designed with clear wiring ports and powered by ESP32 for reliable performance.

2. പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക:

1. ESP32 WLED Digital LED Controller (GL-C-017WL-D) x 1
2. Connect cables x 1
3. ഉപയോക്തൃ നിർദ്ദേശം x 1
4. One-to-four terminal blocks x 2
5. 3cm Sticker x 1
6. (Optional) WLED Remote Control (GL-RC-001WL) x 1 (if purchased as a set)

3 സ്പെസിഫിക്കേഷനുകൾ

4. സജ്ജീകരണം

4.1 പവർ കണക്ഷൻ

The controller supports DC 5-24V input. Choose one of the suitable connection methods for power input:

• V+, V- Power Interface: Connect your DC power supply wires directly to the V+ and V- terminals.
• 5.5x2.1mm DC Socket: Use a compatible DC power adapter plug into this socket.

Important: Ensure the input voltage matches the requirements of your LED strips and the controller (DC 5-24V). The total output current must not exceed 15A.

4.2 LED Strip Wiring

The controller features four independent output channels. Choose the correct wiring configuration based on the number of LED strips you are connecting.

Follow the diagram carefully to connect your digital RGB IC LED strips (e.g., WS2811, WS2812, SK6812, TM1814, WS2813, WS2815) to the appropriate GPIO pins (GPIO1, GPIO2, GPIO4, GPIO16) and GND terminals. Ensure proper polarity (V+, V-, Data).

4.3 Initial WLED App Connection

1. കൺട്രോളറിൽ പവർ ചെയ്യുക.
2. On your smartphone or tablet, connect to the Wi-Fi network broadcast by the controller (usually named "WLED-AP" followed by some numbers).
3. Open the WLED app (available on app stores) or navigate to http://4.3.2.1 ഒരു web ബ്രൗസർ.
4. Follow the in-app instructions to connect the controller to your home Wi-Fi network. Once connected, the controller will no longer broadcast its own Wi-Fi, and you can control it via your home network.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 WLED App Control

The WLED app provides comprehensive control over your LED strips.

• Segmented Color Control: Personalize every strip segment to display different colors and effects. This allows for multi-zone lighting effects from a single controller.



• ഡൈനാമിക് ഇഫക്റ്റുകൾ: Choose from over 100 preloaded dynamic effects to create immersive lighting scenes.



• സംഗീത സമന്വയം: Utilize the built-in microphone function to synchronize your LED lights with music. The lights will follow the rhythm and beat of the audio.

5.2 Remote Control (GL-RC-001WL, if applicable)

If your package includes the GL-RC-001WL remote control, you can use it for convenient wireless operation of your LED strips. The remote offers fast transmission, strong anti-interference, and low power consumption, with a range of up to 30 meters.

6. പരിപാലനം

• വൃത്തിയാക്കൽ: Gently wipe the controller with a dry, soft cloth. Do not use liquid cleaners or solvents.
• പരിസ്ഥിതി: Ensure the controller is operated within the specified temperature range (-20~45℃) and away from excessive moisture or direct heat sources.
• കണക്ഷനുകൾ: എല്ലാ വയറിംഗ് കണക്ഷനുകളും സുരക്ഷിതമാണെന്നും തുരുമ്പെടുക്കലിൽ നിന്ന് മുക്തമാണെന്നും ഉറപ്പാക്കാൻ ഇടയ്ക്കിടെ പരിശോധിക്കുക.

7. പ്രശ്‌നപരിഹാരം

• കൺട്രോളർ പ്രതികരിക്കുന്നില്ല:
  • Check power connections to ensure the controller is receiving adequate power (DC 5-24V).
  • Verify Wi-Fi connection in the WLED app. If disconnected, try reconnecting to the controller's AP and re-configuring your home Wi-Fi.
  • Perform a soft reset by briefly pressing the "Reset" button on the controller.
• LED Strips Not Lighting Up or Incorrect Colors:
  • Ensure LED strip wiring is correct according to the wiring diagram (Figure 4.2), paying attention to Data, V+, and GND connections.
  • Confirm that the LED strip type is supported (WS2811, WS2812, SK6812, TM1814, WS2813, WS2815).
  • Check the WLED app settings for correct LED strip configuration (e.g., number of LEDs, type).
• High Standby Power Consumption:

  The controller includes a relay configuration to reduce standby power consumption. Ensure this feature is enabled in the WLED app settings.

  

• Synchronized Light Effects Issue:

  If you are experiencing issues with synchronized light effects across multiple controllers or segments, ensure the sync settings are correctly configured in the WLED app.

  

• Microphone Function Not Working:

  After resetting the device, the microphone parameters may need to be reconfigured for the first time. The device may also need to be restarted after configuration.

  

  Configuration information (Note: This setting applies to firmware version 0.14):

  • Microphone type: Generic I2S
  • I2S SD pin: 26
  • I2S WS pin: 5
  • I2S SCK pin: 21

8. ഫേംവെയർ അപ്ഡേറ്റുകൾ

The controller supports both wireless (OTA) and wired (UART) firmware updates.

• OTA അപ്‌ഡേറ്റുകൾ: Firmware updates can be performed wirelessly through the WLED app. Ensure your controller is connected to the internet via your home Wi-Fi network.
• Wired UART Upgrades: For wired updates, connect the controller to a computer via its Type-C UART port.

Caution: When updating firmware, always select "WLED 0.15.X ESP32.Bin" or the appropriate firmware version for ESP32. Using incorrect firmware can erase original firmware information and potentially damage the controller.

9 ഉപയോക്തൃ നുറുങ്ങുകൾ

• Experiment with Segments: Leverage the 4-channel independent output and segmented control in the WLED app to create complex and unique lighting zones within a single LED strip or across multiple strips.
• Optimize Power: Enable the relay configuration in the WLED app settings to reduce standby power consumption, especially for installations that are frequently turned off but remain connected to power.
• Explore Dynamic Effects: With over 100 dynamic effects, take time to browse and customize them to match your mood or occasion. The WLED community often shares new effects and configurations.
• Music Sync Placement: For optimal music synchronization, place the controller or an external microphone (if used) in a location where it can clearly pick up audio without excessive background noise.

10. സർട്ടിഫിക്കേഷനുകൾ

ഈ ഉൽപ്പന്നം ഇനിപ്പറയുന്ന സർട്ടിഫിക്കേഷനുകൾ പാലിക്കുന്നു:

• CE
• ഇ.എം.സി
• FCC
• എൽ.വി.ഡി
• ROHS

11. വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the seller's official webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി ബന്ധപ്പെടുക. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.