ഹിസെൻസ് 2227499

Hisense Washing Machine Door Seal Ring 2227499 Instruction Manual

മോഡൽ: 2227499

1. ആമുഖം

This manual provides essential information for the installation, usage, maintenance, and troubleshooting of your new Hisense Washing Machine Door Seal Ring, model 2227499. This component is crucial for maintaining the watertight integrity of your washing machine door during operation. Please read these instructions carefully before attempting any installation or maintenance.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Hisense Washing Machine Door Seal Ring 2227499 is a replacement rubber gasket designed to create a watertight seal between the washing machine drum and the door. It prevents water leakage during wash cycles and is an essential part of your appliance's functionality.

Hisense Washing Machine Door Seal Ring 2227499
Figure 1: Hisense Washing Machine Door Seal Ring 2227499. This image shows the grey rubber seal ring in a circular shape.

3. ഇൻസ്റ്റലേഷൻ (സജ്ജീകരണം)

WARNING: Disconnect the washing machine from the power supply before attempting any installation or repair. Failure to do so may result in electric shock or injury.

Replacing a washing machine door seal ring can be a complex task. It often requires partial disassembly of the washing machine. If you are not confident in your ability to perform this repair, it is highly recommended to consult a qualified appliance technician or refer to your specific washing machine model's service manual for detailed instructions.

പൊതുവായ ഘട്ടങ്ങളിൽ സാധാരണയായി ഇവ ഉൾപ്പെടുന്നു:

  1. തയ്യാറാക്കൽ: Ensure the washing machine is unplugged and the water supply is turned off.
  2. പ്രവേശനം: Open the washing machine door. You may need to remove the front panel or the top panel of the washing machine to gain full access to the old seal.
  3. Remove Old Seal: Carefully detach the old door seal. This usually involves releasing retaining springs or clamps around the outer and inner edges of the seal. Note how the old seal is positioned.
  4. വൃത്തിയാക്കുക: Thoroughly clean the area where the new seal will be installed, removing any residue, mold, or debris.
  5. Install New Seal: Position the new seal ring correctly, ensuring any drainage holes or alignment marks match those on the washing machine. Secure it with the retaining springs or clamps, making sure it is seated evenly and securely.
  6. വീണ്ടും സമാഹരിക്കുക: Reattach any panels or components that were removed.
  7. ടെസ്റ്റ്: Plug in the washing machine and run a short, empty wash cycle to check for leaks before normal use.

4. ഉപയോഗ മാർഗ്ഗനിർദ്ദേശങ്ങൾ (പ്രവർത്തനം)

Once installed, the door seal ring operates passively to prevent water leakage. Proper usage and care of your washing machine will help prolong the life of the seal:

  • ഓവർലോഡ് ചെയ്യരുത്: Avoid overloading the washing machine, as this can push clothes against the seal, potentially damaging it or causing leaks.
  • Close Door Gently: Always close the washing machine door gently to prevent undue stress on the seal.
  • തടസ്സങ്ങൾക്കായി പരിശോധിക്കുക: Before closing the door, ensure no clothing items are caught between the door and the seal.

5. പരിപാലനം

Regular maintenance of the door seal ring is essential to prevent mold growth, unpleasant odors, and premature wear.

  • ഓരോ ഉപയോഗത്തിനും ശേഷം തുടയ്ക്കുക: After each wash cycle, wipe down the inside of the door seal with a clean cloth to remove any moisture, lint, or detergent residue.
  • Leave Door Ajar: When the washing machine is not in use, leave the door slightly ajar to allow air circulation and prevent moisture buildup, which can lead to mold and mildew.
  • Deep Clean (Monthly): Periodically clean the seal more thoroughly using a mixture of warm water and mild detergent, or a washing machine cleaner specifically designed for seals. Pay attention to any folds or crevices where residue can accumulate.
  • കേടുപാടുകൾക്കായി പരിശോധിക്കുക: Regularly inspect the seal for any signs of cracks, tears, or hardening. A damaged seal should be replaced promptly to prevent leaks.

6. പ്രശ്‌നപരിഹാരം

Here are some common issues related to the door seal ring and potential solutions:

പ്രശ്നം സാധ്യമായ കാരണം പരിഹാരം
Water Leakage from Door
  • സീൽ ശരിയായി ഇൻസ്റ്റാൾ ചെയ്തിട്ടില്ല.
  • Seal is damaged (cracked, torn)
  • Debris caught in seal
  • Washing machine overloaded
  • Re-check installation, ensure seal is seated correctly.
  • Inspect seal for damage; replace if necessary.
  • Clean seal thoroughly, remove any obstructions.
  • ലോഡ് വലുപ്പം കുറയ്ക്കുക.
Unpleasant Odor / Mold Growth
  • Moisture trapped in seal
  • Detergent residue buildup
  • Wipe seal dry after each use.
  • Leave door ajar when not in use.
  • Perform a deep clean of the seal and run a hot wash cycle with a washing machine cleaner.

7 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർ വിശദാംശങ്ങൾ
ഉൽപ്പന്ന തരം വാഷിംഗ് മെഷീൻ ഭാഗങ്ങൾ
മോഡൽ നമ്പർ 2227499
ബ്രാൻഡ് അനുയോജ്യത ഹിസെൻസ്
ഉത്ഭവം മെയിൻലാൻഡ് ചൈന
ഉയർന്ന തലത്തിലുള്ള രാസവസ്തുക്കൾ ഒന്നുമില്ല

8 ഉപയോക്തൃ നുറുങ്ങുകൾ

  • Verify Model Compatibility: വാങ്ങുന്നതിന് മുമ്പ്asing and installing, always double-check that this door seal ring (model 2227499) is compatible with your specific Hisense washing machine model. Refer to your washing machine's original manual or the manufacturer's website for part numbers.
  • പ്രൊഫഷണൽ ഇൻസ്റ്റാളേഷൻ ശുപാർശ ചെയ്യുന്നു: If you are unsure about the installation process, consider hiring a professional appliance repair technician to ensure correct and safe replacement.

9. വാറൻ്റിയും പിന്തുണയും

For information regarding warranty coverage, returns, or technical support, please contact the seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.

അനുബന്ധ രേഖകൾ - 2227499

പ്രീview Hướng Dẫn Vận Hành Máy Giặt Sấy Hisense WD90N1 സീരീസ്
ഹിസ്സെൻസ് WD90N1, WD90N1Y, WD90N1* với hểu cách sử dụng và bảo trì máy giặt sấy Hisense WD90N1* với hưống dẁt, vận hành, chương trình giặt, xử lý sự cố và các lưu ý an toàn.
പ്രീview ഹിസെൻസ് HW-K60B പൂർണ്ണമായും ഓട്ടോമാറ്റിക് വാഷിംഗ് മെഷീൻ ഉപയോക്തൃ മാനുവൽ
ഹിസെൻസ് HW-K60B പൂർണ്ണമായും ഓട്ടോമാറ്റിക് വാഷിംഗ് മെഷീനിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, സുരക്ഷാ മുൻകരുതലുകൾ, പ്രവർത്തനം, ഇൻസ്റ്റാളേഷൻ, അറ്റകുറ്റപ്പണികൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview ഹിസെൻസ് WD3S1043BW3 വാഷിംഗ്-ഡ്രൈയിംഗ് മെഷീൻ: സാങ്കേതിക സവിശേഷതകളും സവിശേഷതകളും
Hisense WD3S1043BW3 വാഷിംഗ്-ഡ്രൈയിംഗ് മെഷീനിന്റെ ശേഷി, ഊർജ്ജ കാര്യക്ഷമത, പ്രവർത്തന പ്രവർത്തനങ്ങൾ എന്നിവയുൾപ്പെടെയുള്ള വിശദമായ സ്പെസിഫിക്കേഷനുകൾ, സവിശേഷതകൾ, പ്രോഗ്രാമുകൾ, സാങ്കേതിക ഡാറ്റ.
പ്രീview Hisense WDQY8014EVJMT Washer-Dryer Quick User Manual
A concise guide to operating your Hisense WDQY8014EVJMT washer-dryer, covering program selection, functions, and care instructions.
പ്രീview Hisense Washing Machine Quick User Manual and Specifications
Concise user manual and technical specifications for Hisense washing machines, covering programs, functions, dimensions, and energy efficiency. Includes guidance on operation and maintenance.
പ്രീview ഹിസെൻസ് ഫ്രണ്ട് ലോഡ് വാഷർ ഇൻസ്റ്റലേഷൻ ഗൈഡും സുരക്ഷാ വിവരങ്ങളും
HWFY7514, HWFY8514, HWFY9514, HWFY1014 എന്നീ മോഡലുകൾ ഉൾപ്പെടെ, ഹിസെൻസ് ഫ്രണ്ട് ലോഡ് വാഷിംഗ് മെഷീനുകൾക്കായുള്ള സമഗ്രമായ ഇൻസ്റ്റലേഷൻ ഗൈഡും സുരക്ഷാ വിവരങ്ങളും. നിങ്ങളുടെ ഉപകരണം എങ്ങനെ സുരക്ഷിതമായി ഇൻസ്റ്റാൾ ചെയ്യാമെന്നും പ്രവർത്തിപ്പിക്കാമെന്നും പരിപാലിക്കാമെന്നും അറിയുക.