1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The ANTUSI A8Pro is an advanced 6-in-1 smart bike tail light designed to enhance cycling safety and security. It integrates multiple functions including a cycling rear lamp, accurate braking light, wireless bell, remote call, and a robust anti-theft siren. The A8Pro model features adjustable alarm sensitivity, 5 distinct ring tones, and adjustable tone volume for a personalized experience.
2. പാക്കേജ് ഉള്ളടക്കം
എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കാൻ പാക്കേജ് പരിശോധിക്കുക:
- A8Pro Smart Bike Tail Light
- വയർലെസ് റിമോട്ട് കൺട്രോൾ
- യുഎസ്ബി ചാർജിംഗ് കേബിൾ
- Saddle Rail Mount Bracket
- Round Seat Post Mount Bracket
- Mounting Hardware (screws, Allen key, zip ties, adhesive pad)
3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
The A8Pro offers a dual mount system for versatile installation on your bicycle.
3.1 മൗണ്ടിംഗ് ഓപ്ഷനുകൾ
You can choose to install the tail light either on the saddle rail or on a round seat post.
- സാഡിൽ റെയിൽ മൗണ്ട്: Attach the saddle rail bracket to the rails under your bicycle seat using the provided hardware. Ensure it is securely fastened.
- Seat Post Mount: Use the round seat post bracket to attach the light to your seat post. Secure it with the provided zip ties or other fasteners.
Once the bracket is installed, slide the A8Pro tail light onto the bracket until it clicks into place. Ensure the light is facing directly backward for optimal visibility.
3.2. Remote Control Pairing (if not pre-paired)
Typically, the remote control comes pre-paired with the tail light. If re-pairing is needed:
- Ensure the tail light is charged and turned off.
- Press and hold the main button on the tail light until it enters pairing mode (usually indicated by a specific light pattern).
- Press any button on the remote control. The tail light will confirm successful pairing (e.g., by flashing or beeping).
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The A8Pro offers multiple functionalities controlled via the main unit button and the wireless remote.
4.1. Tail Light Operation
- പവർ ഓൺ/ഓഫ്: Press and hold the main button on the tail light for 2-3 seconds.
- ലൈറ്റ് മോഡ് മാറ്റുക: Short press the main button on the tail light to cycle through the 4 available modes:
- Auto Fast Strobe
- ശ്വസനം
- Manual Pop Strobe
- സ്ഥിരതയുള്ള
- Smart Braking: The light features an accurate braking warning system. When deceleration is detected, the light will automatically brighten to signal braking, enhancing safety.
- ഇന്റലിജന്റ് സെൻസിംഗ്: The light can automatically adjust its brightness or mode based on ambient light conditions or movement, optimizing battery life and visibility.
4.2. വിദൂര നിയന്ത്രണ പ്രവർത്തനങ്ങൾ
The wireless remote control provides convenient access to various features:
- Arm/Disarm Alarm: Use the dedicated buttons on the remote to arm the anti-theft alarm (e.g., lock icon) or disarm it (e.g., unlock icon). When armed, any significant vibration will trigger a 115dB siren.
- Wireless Bell/Horn: Press the bell/horn button on the remote to activate the bicycle bell sound, alerting pedestrians or other cyclists.
- Remote Call: This function can be used to locate your bike in a crowded area by triggering a sound from the tail light.
- Adjust Alarm Sensitivity: The A8Pro allows adjustment of the alarm's vibration sensitivity. Refer to the specific instructions for your model on how to enter sensitivity adjustment mode (usually a combination of remote buttons or a sequence of presses on the main unit).
- Change Ring Tones/Volume: The A8Pro offers 5 different ring tones and adjustable volume for the bell/horn and alarm. Consult your product's specific guide for the sequence to change these settings.
5. ചാർജിംഗും ബാറ്ററി പരിപാലനവും
5.1. Tail Light Charging
The A8Pro tail light is USB rechargeable.
- Locate the USB charging port on the tail light (usually covered by a rubber flap).
- Connect the provided USB charging cable to the tail light and to a 5V 2A (max) USB power source (e.g., computer, wall adapter, power bank).
- A charging indicator light will show the charging status (e.g., red for charging, green/blue for fully charged).
- ഒരു ഫുൾ ചാർജിന് ഏകദേശം 3 മണിക്കൂറാണ് ചാർജ്ജിംഗ് സമയം.
- The battery capacity is 800mAH, providing a runtime of approximately 8-30 hours depending on the mode used.
5.2. റിമോട്ട് കൺട്രോൾ ബാറ്ററി
The remote control is powered by a replaceable 12V/27A battery. This battery is not rechargeable. When the remote's range or responsiveness decreases, it's time to replace the battery.
5.3. ജല പ്രതിരോധം
The A8Pro has an IP65 ingress protection rating, meaning it is water splash proof. It is designed to withstand rain and splashes but should not be submerged in water.
6. പ്രശ്നപരിഹാരം
- ലൈറ്റ് ഓണാക്കുന്നില്ല: ബാറ്ററി ചാർജ്ജ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക. ഒരു USB പവർ സ്രോതസ്സിലേക്ക് കണക്റ്റ് ചെയ്ത് ചാർജിംഗ് ഇൻഡിക്കേറ്റർ പരിശോധിക്കുക.
- റിമോട്ട് പ്രതികരിക്കുന്നില്ല: Check the remote control battery (12V/27A). Replace if necessary. If still unresponsive, attempt to re-pair the remote with the tail light (refer to Section 3.2).
- Alarm not triggering or too sensitive: Adjust the alarm sensitivity setting. Refer to the product's specific instructions for how to do this, as it often involves a sequence of button presses on the remote or main unit.
- Brake sensing not working: Ensure the light is mounted securely and oriented correctly. The sensor needs a stable position to accurately detect deceleration.
- ഹ്രസ്വ ബാറ്ററി ലൈഫ്: Ensure the light is fully charged. Consider using modes with lower power consumption if extended runtime is needed. Extreme cold weather can also affect battery performance.
7 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | A8 PRO |
| ബ്രാൻഡ് നാമം | ആന്റുസി |
| ടൈപ്പ് ചെയ്യുക | ടെയിൽ ലൈറ്റ് |
| പ്രകാശ സ്രോതസ്സ് | LED COB Red Light |
| ലൈറ്റ് മോഡുകൾ | 4 modes (Auto Fast Strobe & Breathing, Manual Pop Strobe & Steady) |
| ഇൻ്റലിജൻ്റ് സെൻസിംഗ് | അതെ |
| ഡിമ്മറിനെ പിന്തുണയ്ക്കുക | 2 - 4 Files |
| അലാറം ശബ്ദ നില | 115dB (5 tones, volume adjustable) |
| വൈദ്യുതി വിതരണം | Battery (USB Rechargeable) |
| Tail Light Battery | 800mAH, runtime approx. 8-30Hrs |
| കൺട്രോളർ ബാറ്ററി | 12V/27A (replaceable, not chargeable) |
| പ്രവേശന സംരക്ഷണം | IP65 (water splash proof) |
| മൗണ്ടിംഗ് പ്ലേസ്മെൻ്റ് | Seatpost / Saddle Rail |
| ബോഡി മെറ്റീരിയൽ | എബിഎസ് |
| സർട്ടിഫിക്കേഷൻ | CE, RoHS |
| ഉത്ഭവം | മെയിൻലാൻഡ് ചൈന |
| ഉൽപ്പന്ന അളവുകൾ (ഏകദേശം) | നീളം: 17cm, വീതി: 11cm, ഉയരം: 5cm |
| മൊത്തം ഭാരം (ഏകദേശം) | Lamp: 66g; Controller: 23g |
8 ഉപയോക്തൃ നുറുങ്ങുകൾ
- Optimal Alarm Placement: For best anti-theft performance, ensure the light is mounted securely and not easily accessible for tampഎറിംഗ്.
- പതിവ് ചാർജിംഗ്: To maximize battery life and ensure readiness, charge the tail light regularly, especially before long rides.
- വിദൂര ബാറ്ററി പരിശോധന: If you notice a decrease in remote control range or responsiveness, replace the 12V/27A battery promptly.
- Brake Sensing Calibration: After installation, gently rock your bike to test the brake sensing feature. If it's not consistent, re-check the mounting stability.
- ക്രമീകരണങ്ങൾ ഇഷ്ടാനുസൃതമാക്കുക: അഡ്വാൻ എടുക്കുകtage of the adjustable alarm sensitivity, ring tones, and volume to suit your personal preferences and riding environment.
9. വാറൻ്റിയും പിന്തുണയും
For any warranty claims, technical support, or product inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
The product is certified with CE and RoHS standards, indicating compliance with health, safety, and environmental protection standards.
