1. ആമുഖം
Thank you for choosing the WSDCAM Motorcycle TPMS (Tire Pressure Monitoring System). This device is designed to enhance your riding safety by providing real-time monitoring of your motorcycle's tire pressure and temperature. With its advanced features and robust design, you can ride with greater confidence and peace of mind.
2 പ്രധാന സവിശേഷതകൾ
- തത്സമയ നിരീക്ഷണം: Displays motorcycle tire data, including temperature and pressure, in real-time.
- 7 അലാറം മോഡുകൾ: Includes high-pressure, low-pressure, high-temperature, fast air leakage, sensor data loss, sensor low battery, and receiver low power alarms.
- Advanced Smart Chip: Quickly and effectively senses tire conditions, providing accurate and timely alerts for abnormal tire pressure. Strong, interference-free signal for higher stability.
- യാന്ത്രിക പ്രവർത്തനം: The vibrator automatically enters working state when driving. The monitor automatically enters dormant and standby state when the motorcycle stops for a static period.
- Intelligent Charging Design: Features magnetic charging for quick and convenient power replenishment. The magnetic design is also waterproof and dustproof.
- IP67 വാട്ടർപ്രൂഫ്: Designed to withstand rain, mud, and dust, ensuring reliable performance in various riding conditions.
3. പാക്കേജ് ഉള്ളടക്കം
എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കാൻ പാക്കേജ് പരിശോധിക്കുക:
- TPMS Monitor Unit
- Front Wheel Sensor (A.F.W)
- Rear Wheel Sensor (B.R.W)
- സ്പാനർ
- യുഎസ്ബി പവർ കോർഡ്
- Theft-proof Nuts (2x)
- Mounting Bracket (pre-attached to monitor)
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
4.1 Charging the Monitor
Before first use, fully charge the TPMS monitor. The unit supports both solar power charging and magnetic USB charging.
- സോളാർ ചാർജിംഗ്: Place the monitor in direct sunlight to utilize its integrated solar panel.
- മാഗ്നറ്റിക് യുഎസ്ബി ചാർജിംഗ്: Connect the provided USB power cord to the magnetic charging port on the monitor and a USB power source. The magnetic design ensures a secure, waterproof, and dustproof connection.
4.2 Installing the Monitor
The monitor comes with a mounting bracket suitable for motorcycle handlebars.
- Attach the mounting bracket securely to your motorcycle's handlebars.
- Slide the TPMS monitor onto the bracket until it clicks into place.
- ക്രമീകരിക്കുക viewing angle for optimal visibility while riding.
4.3 Installing the Sensors
The sensors are labeled 'A.F.W' (Front Wheel) and 'B.R.W' (Rear Wheel). Ensure you install them on the correct tires.
- Unscrew the valve cap from your tire.
- Screw on one of the theft-proof nuts onto the valve stem.
- Screw the corresponding sensor (A.F.W for front, B.R.W for rear) onto the valve stem until it is hand-tight.
- Using the provided spanner, tighten the theft-proof nut against the sensor to secure it and prevent theft.
- Repeat for the other tire.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
5.1 Power On/Off and Automatic Operation
- The monitor will automatically power on and enter working state when it detects vibration (e.g., when you start riding).
- When the motorcycle stops and remains static for approximately ten minutes, the monitor will automatically enter a dormant (sleep) and standby state to conserve power.
5.2 ഡിസ്പ്ലേ മനസ്സിലാക്കുന്നു
The LCD color screen provides clear, real-time information about your tires.
| സൂചകം | വിവരണം |
|---|---|
| FW (Front Wheel) Pressure | Current pressure of the front tire (e.g., Psi, Bar) |
| FW (Front Wheel) Temperature | Current temperature of the front tire (e.g., °F, °C) |
| RW (Rear Wheel) Pressure | Current pressure of the rear tire (e.g., Psi, Bar) |
| RW (Rear Wheel) Temperature | Current temperature of the rear tire (e.g., °F, °C) |
| സമയ പ്രദർശനം | നിലവിലെ സമയം |
| പവർ ഡിസ്പ്ലേ | Battery level of the monitor unit |
5.3 അലാറം മോഡുകൾ
The TPMS is equipped with a 7-alarm guardian system to alert you to potential issues:
- ഉയർന്ന മർദ്ദം അലാറം: Alerts when tire pressure exceeds a preset safe limit.
- ലോ പ്രഷർ അലാറം: Alerts when tire pressure drops below a preset safe limit.
- ഉയർന്ന താപനില അലാറം: Alerts when tire temperature exceeds a preset safe limit.
- Fast Tire Leak Alarm: Detects and alerts rapidly decreasing tire pressure.
- സെൻസർ ഡാറ്റ നഷ്ട അലാറം: Indicates a sensor is not transmitting data.
- Sensor Low Battery Alarm: Alerts when a tire sensor's battery is low.
- Receiver Low Power Alarm: Alerts when the main monitor unit's battery is low.
Upon an alarm, the monitor will typically emit an audible warning and display the specific alarm icon or message on the screen. Address any alarms promptly for your safety.
6. പരിപാലനം
6.1 വൃത്തിയാക്കൽ
Wipe the monitor and sensors with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. The IP67 rating ensures the device is waterproof and dustproof, but avoid submerging it for extended periods or using high-pressure water jets directly on the charging port or sensors.
6.2 ബാറ്ററി കെയർ
- Regularly check the monitor's power display and recharge as needed using solar power or the magnetic USB cable.
- If a 'Sensor Low Battery' alarm occurs, replace the battery in the affected sensor immediately. Refer to the sensor's specific instructions for battery replacement.
7. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| മോണിറ്റർ ഓണാക്കുന്നില്ല | Low battery; no vibration detected. | Charge the monitor. Ensure the motorcycle is moving to activate the vibrator sensor. |
| No tire data displayed / Sensor Data Loss Alarm | Sensor not installed correctly; sensor battery low/dead; sensor out of range; interference. | Check sensor installation. Replace sensor battery. Ensure sensors are within range of the monitor. Check for strong electromagnetic interference. |
| കൃത്യമല്ലാത്ത വായനകൾ | Sensors not calibrated; external factors (extreme temperature changes). | Ensure sensors are correctly paired. Allow time for readings to stabilize after significant temperature changes. Verify tire pressure with a reliable gauge. |
| High/Low Pressure Alarm | Actual tire pressure is outside safe limits. | Immediately check tire pressure and inflate/deflate to recommended levels. Inspect for punctures or leaks. |
| ഉയർന്ന താപനില അലാറം | Tire overheating. | Pull over safely and allow tires to cool down. Check for under-inflation or excessive load. |
8 സ്പെസിഫിക്കേഷനുകൾ
| പരാമീറ്റർ | മൂല്യം |
|---|---|
| വർക്കിംഗ് വോളിയംtage | 3.7-5V |
| സ്ക്രീൻ | എൽസിഡി കളർ സ്ക്രീൻ |
| പ്രവർത്തന താപനില | -20℃ ~ +80℃ |
| സംഭരണ താപനില | -30℃ ~ +85℃ |
| വർക്ക് കറൻ്റ് | <7 mA |
| ആവൃത്തി | 433.92 mHz ± 50 kHz |
| മെറ്റീരിയൽ | എബിഎസ് + പിസി |
| വാട്ടർപ്രൂഫ് റേറ്റിംഗ് | IPX67 |
9 ഉപയോക്തൃ നുറുങ്ങുകൾ
- For optimal solar charging, ensure the monitor's solar panel is exposed to direct sunlight whenever possible, especially when parked.
- Always double-check tire pressure with a manual gauge periodically to confirm the accuracy of the TPMS readings.
- When installing sensors, ensure they are tightened sufficiently to prevent air leaks but do not overtighten, which could damage the valve stem.
- Familiarize yourself with the alarm sounds and display indicators so you can quickly identify and respond to any warnings while riding.
10. വാറൻ്റിയും പിന്തുണയും
For warranty information, technical support, or service inquiries, please refer to the seller's contact information or the product listing page where you purchased this device. Keep your proof of purchase for warranty claims.
