1. ആമുഖം
The SONOFF RF Bridge R2 433MHz Gateway is a smart home device designed to convert traditional 433.92MHz RF remote controls and sensors into Wi-Fi wireless signals. This allows for seamless integration and control of various RF-controlled products through the eWeLink app, as well as voice control via Google Home and Amazon Alexa. The RF Bridge R2 acts as a central hub, enabling you to create smart scenes and enhance your home security system by connecting with compatible 433.92MHz sensors like the DW2-RF door/window sensor and PIR3-RF motion sensor.
2. ഉൽപ്പന്ന സവിശേഷതകൾ
- RF to Wi-Fi Conversion: Converts 433.92MHz RF signals to Wi-Fi, allowing control of RF devices via the eWeLink app from anywhere.
- ഒന്നിലധികം ഉപകരണ പിന്തുണ: Can learn up to 64 433MHz codes, supporting various RF-controlled switches, sockets, bulbs, and door openers.
- സ്മാർട്ട് സീൻ ക്രിയേഷൻ: Integrates with 433.92MHz sensors (e.g., DW2-RF, PIR3-RF) to trigger automated smart scenes.
- ശബ്ദ നിയന്ത്രണം: Compatible with Google Home and Amazon Alexa for convenient voice commands.
- ടൈമർ പ്രവർത്തനങ്ങൾ: Supports schedule, countdown, and loop timers for automated control of RF devices.
- അലാറം പ്രവർത്തനങ്ങൾ: When paired with compatible sensors, it can provide security alarm notifications to your eWeLink app.
Figure 1: SONOFF RF Bridge R2 with DW2-RF and PIR3-RF sensors, highlighting smart features.
Figure 2: RF Bridge R2 acting as a bridge between 433MHz RF devices and Wi-Fi/ZigBee devices.
Figure 3: Key features of the RF Bridge R2.
3. പാക്കേജ് ഉള്ളടക്കം
പാക്കേജിൽ സാധാരണയായി ഉൾപ്പെടുന്നു:
- SONOFF RF Bridge R2
- ഉപയോക്തൃ മാനുവൽ
- Micro USB Cable (for power)
- Optional: SONOFF DW2-RF Door/Window Sensor
- Optional: SONOFF PIR3-RF Motion Sensor
Figure 4: Typical product packaging for the RF Bridge R2.
4 സ്പെസിഫിക്കേഷനുകൾ
| ആട്രിബ്യൂട്ട് | മൂല്യം |
|---|---|
| മോഡൽ | RF ബ്രിഡ്ജ്R2 |
| പവർ ഉറവിടം | Other (USB 5V) |
| ഇൻപുട്ട് | 5V 1A |
| RF ഫ്രീക്വൻസി | 433.92 MHz |
| വൈഫൈ സ്റ്റാൻഡേർഡ് | IEEE 802.11 b / g / n 2.4GHz |
| ആശയവിനിമയ രീതി | ആർഎഫ്, വൈ-ഫൈ |
| സുരക്ഷാ സംവിധാനം | WPA-PSK/WPA2-PSK |
| Supported RF Frequencies | Fixed Code 433MHz (PT2260, PT2262, PT2264, EV1527) |
| ഓപ്പറേറ്റിംഗ് സിസ്റ്റങ്ങൾ | Android & iOS |
| പ്രവർത്തന താപനില | -10°C~40°C |
| മെറ്റീരിയൽ | പിസി V0 |
| ഉൽപ്പന്ന അളവുകൾ | 62*62*20 (മില്ലീമീറ്റർ) |
| ബാറ്ററി ഉൾപ്പെടുത്തിയിട്ടുണ്ട് | ഇല്ല |
| നിയമസഭാ സംസ്ഥാനം | റെഡി-ടു-ഗോ |
Figure 5: Detailed specifications of the RF Bridge R2.
5. സജ്ജീകരണ ഗൈഡ്
5.1 Initial Setup of RF Bridge R2
- eWeLink ആപ്പ് ഡൗൺലോഡ് ചെയ്യുക: ഇതിനായി തിരയുക "eWeLink" in your mobile app store (iOS or Android) and download the application.
- പവർ ഓൺ: Connect the RF Bridge R2 to a 5V USB power source using the provided micro USB cable.
- Enter Quick Pairing Mode: After powering on, use a needle or a small pin to poke the reset hole on the device for 5 seconds. The Wi-Fi LED indicator will change, cycling through two short flashes and one long flash, indicating it's in quick pairing mode.
- ആപ്പിൽ ഉപകരണം ചേർക്കുക: Open the eWeLink app, tap the "+" icon, and select "Quick Pairing". Follow the on-screen prompts to connect the RF Bridge R2 to your 2.4GHz Wi-Fi network. Ensure your smartphone is close to the Wi-Fi router during this process.
Figure 6: Quick Start guide for RF Bridge R2 setup.
Video 1: Demonstration of RF Bridge R2 quick pairing mode.
5.2 Pairing 433MHz RF Devices (Sensors/Remotes)
Once the RF Bridge R2 is connected to the eWeLink app, you can add 433MHz RF devices:
- In the eWeLink app, tap on your RF Bridge R2 device.
- Select the type of RF device you want to add (e.g., 1-button, 2-button, Alarm for sensors).
- Follow the app's instructions to put your RF device into learning mode (e.g., long-press a button on the remote or trigger the sensor). The RF Bridge R2 will emit a peak beep when it successfully learns the code.
- Repeat for all desired buttons/sensors.
കുറിപ്പ്:
- The RF Bridge R2 supports fixed code 433.92MHz frequency devices (e.g., PT2260, PT2262, PT2264, EV1527). It does NOT support rolling code or dynamic code devices.
- You can add up to 16 RF devices or alarms.
Figure 7: SONOFF DW2-RF wireless door/window sensor.
Figure 8: SONOFF PIR3-RF motion sensor.
6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
6.1 അലാറം പ്രവർത്തനങ്ങൾ
When a 433MHz sensor (like DW2-RF or PIR3-RF) is added as an alarm device to the RF Bridge R2, it can trigger notifications in the eWeLink app.
- Ensure your DW2-RF or PIR3-RF sensor is successfully paired to the RF Bridge R2 as an "Alarm" type.
- When the sensor is triggered (e.g., door opens, motion detected), the RF Bridge R2 will receive the signal.
- An alarm notification will be displayed on your eWeLink app, and recorded in the device history.
Video 2: Demonstration of alarm functions with DW2-RF sensor.
6.2 സ്മാർട്ട് സീനുകൾ സൃഷ്ടിക്കൽ
Smart scenes allow you to automate actions based on sensor triggers or remote control presses.
- In the eWeLink app, navigate to the "Scene" section.
- Tap the "+" icon to create a new scene.
- Set Trigger: Choose a smart device (e.g., your DW2-RF sensor) as the trigger. For example, "when the door opens".
- പ്രവർത്തനം ചേർക്കുക: Select the action to perform, such as turning on/off a light bulb or another Wi-Fi/ZigBee device connected to eWeLink.
- Name and save your scene.
ചിത്രം 9: ഉദാamples of smart scenes with PIR3-RF and DW2-RF sensors.
Video 3: Demonstration of setting up smart scenes in the eWeLink app.
6.3 Remote Control and Timers
Once 433MHz remote controls are learned by the RF Bridge R2, you can use them to control various devices or set up advanced timing options.
- ഒരേസമയം നിയന്ത്രണം: Use a learned remote to control multiple devices at once through the eWeLink app.
- ടൈമർ ഓപ്ഷനുകൾ: Set specified time, countdown, or loop execution timers for your RF-controlled devices. For example, automatically turn off lights at 11:00 PM, close curtains after 30 minutes, or cycle a heater every 10 minutes.
Figure 10: Control multiple devices simultaneously with the RF Bridge R2.
Figure 11: Multiple timer options available for RF devices.
7. പരിപാലനം
- വൃത്തിയായി സൂക്ഷിക്കു: Regularly wipe the device with a dry, soft cloth to remove dust.
- ഈർപ്പം ഒഴിവാക്കുക: ഉപകരണം വെള്ളത്തിലോ ഉയർന്ന ആർദ്രതയിലോ തുറന്നുകാട്ടരുത്.
- ഫേംവെയർ അപ്ഡേറ്റുകൾ: Keep the eWeLink app and device firmware updated to ensure optimal performance and access to new features.
- വൈദ്യുതി വിതരണം: Use a stable 5V 1A USB power adapter for reliable operation.
8. പ്രശ്നപരിഹാരം
- ഉപകരണം ജോടിയാക്കുന്നില്ല: Ensure the RF Bridge R2 is in quick pairing mode (Wi-Fi LED cycling two short, one long flash). Check that your Wi-Fi network is 2.4GHz. Move the device closer to your router.
- RF Device Not Learning: Confirm the RF device uses a supported fixed 433.92MHz code (PT2260, PT2262, PT2264, EV1527). Ensure the RF device is properly put into learning mode as per its own instructions.
- No Alarm Notifications: Verify that the sensor is correctly paired as an "Alarm" type in the RF Bridge R2 settings within the eWeLink app. Check app notification settings on your phone.
- Smart Scene Not Triggering: Double-check the scene setup in the eWeLink app, ensuring the trigger conditions and actions are correctly configured and enabled.
- പരിമിത ശ്രേണി: The effective range of RF signals can be affected by obstacles and interference. Try repositioning the RF Bridge R2 or the RF sensors for better signal reception.
9 ഉപയോക്തൃ നുറുങ്ങുകൾ
- നിങ്ങളുടെ ഉപകരണങ്ങൾ ക്രമീകരിക്കുക: Use clear names for your RF devices and scenes in the eWeLink app to easily manage your smart home setup.
- പതിവായി പരീക്ഷിക്കുക: Periodically test your alarm functions and smart scenes to ensure they are working as expected.
- ഊർജ്ജ സ്രോതസ്സ്: While the device is powered by USB 5V, ensure you use a reliable power adapter to avoid connectivity issues.
- RF Frequency Compatibility: Always confirm that any new RF devices you wish to integrate are compatible with the 433.92MHz fixed code standard supported by the RF Bridge R2.
10. വാറൻ്റിയും പിന്തുണയും
വാറന്റി വിവരങ്ങൾ, സാങ്കേതിക പിന്തുണ അല്ലെങ്കിൽ കൂടുതൽ സഹായം എന്നിവയ്ക്കായി, ദയവായി ഔദ്യോഗിക SONOFF കാണുക. webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുക. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.
