മിനി തെർമൽ
പ്രിൻ്റർ
ഉപയോക്തൃ മാനുവൽ

മിനി തെർമൽ പ്രിന്റർ

മുന്നറിയിപ്പ്

1. Power & Charging Safety
   • Use only a 5V 1A USB power supply and certified chargers.
   • Use only the supplied or approved charging cable.
   • Disconnect the charging cable once charging is complete.
   • Do not charge the product on flammable surfaces (such as beds, sofas, cloth) or inside enclosed spaces.
   • Keep the device away from water or moisture. Do not charge or operate the printer if it has been exposed to water or heavy splashing.
2. ബാറ്ററി സുരക്ഷ
   • Do not attempt to open, crush, puncture, short-circuit, or remove the internal battery.
   • Stop using the product immediately if the battery becomes swollen, leaking, overheated, or emits unusual odor.
   • Only use the specified battery type. Using an incorrect battery may cause fire or explosion.
   • Do not expose the battery to fire, high temperatures, or direct sunlight (such as inside a hot car).
   • Dispose of batteries and electronic parts according to local WEEE electronic-waste regulations.
   • Do not dispose of them in household waste.
3. Heat & Burn Hazard
   • The printing head becomes hot during use. Do not touch the printing head during or immediately after printing.
   • Avoid scratching or pressing the print head with hard objects.
4. കുട്ടികളുടെ സുരക്ഷ
   • Contains small parts. Not suitable for children under 3 years., Recommended age is 3 years old and above, but adult supervision is recommended.
   • Children must not charge the device or perform maintenance without supervision.
   • Keep the charging cable, battery components, and any small detachable parts away from young children to prevent choking, entanglement, or injury.
   • Children should use the app with permission from a parent or responsible adult
5. Thermal Paper Contact
   • Use only BPA-free, approved thermal paper intended for this device.
   • Do not put thermal paper in the mouth. Dispose of rolls after use.
6. Fire, Electric Shock, and Damage Prevention
   • Do not disassemble, modify, crush, or burn the device.
   • Do not operate the product if it is damaged, deformed, or emits unusual heat, smoke, or noise.
   ഉടൻ അൺപ്ലഗ് ചെയ്യുക.
   • Do not expose the printer to water, rain, high humidity, or direct sunlight.
   • Do not place the product near open flames or heat sources.

മുൻകരുതൽ

1. Handling & Operation
   • Insert and remove the charging cable gently to avoid damaging the connector.
   • Do not use the device with damaged cables or adapters.
   • Use only in clean, dry indoor environments. Avoid dust, humidity, and strong vibration.
2. അമിത ചൂടാക്കൽ സംരക്ഷണം
   • Long or continuous printing may cause the print head to overheat.
   • The printer may pause automatically to cool down. This is normal. Resume use after cooling.
3. ശുചീകരണവും പരിപാലനവും
   • Turn off the device and disconnect all cables before cleaning.
   • Wipe the printer with a dry, soft cloth.
   • Do not use liquids, chemicals, or sprays to clean the device.

മോഡൽ:

• AG-NEWMINI-PRT-WH01
• AG-NEWMINI-PRT-BLK01
• NEWMINI-PRT-WH01
• NEWMINI-PRT-BLK1

AgoDeo, support@agodeo.com, Parkzichtlaan 214 3544MN UTRECHT, NL

ഉൽപ്പന്ന രൂപം

ഇൻഡിക്കേറ്റർ ലൈറ്റ് വിവരണം

Green light: Fully charged, ready for normal use.
Red light (lit): Charging, out of paper, overheating or cover open.
Red light (flashing): Battery low, which may result in discolored prints; charge immediately.

ഉപയോഗ മാർഗ്ഗനിർദ്ദേശങ്ങൾ

1. Download the “FunPrint” APP
   Install for iOS
   Open “APP Store”, search “Fun Print” APP and download it.Install for Android
   Open the “Google Play ” directly and search “Fun Print” APP and download it.

Install by QR code
The “Fun Print” APP QR code will be printed automatically when you double-click the button after turned on the printer, you also can download it by scan the QR code on the paper.

https://agodeo.qrplanet.com/mini-printer-app

നിങ്ങൾക്ക് ഇപ്പോഴും എന്തെങ്കിലും ചോദ്യങ്ങളുണ്ടെങ്കിൽ, ഞങ്ങളെ ബന്ധപ്പെടാൻ മടിക്കേണ്ടതില്ല, 24 മണിക്കൂറിനുള്ളിൽ ഞങ്ങൾ നിങ്ങൾക്ക് ഉടനടി മറുപടി നൽകും!
ഉപയോഗ ഘട്ടങ്ങൾ
നുറുങ്ങുകൾ: Please fully charge the printer for the first time, then unplug the charger before use!

1. Press and hold for 3 seconds the power button until the indicator turns green.
2. Please turn on the Bluetooth of your phone.
3. Open the “Fun Print” APP and Click the “+My Device” in the upper right corner to looking for the printer device and connect it.
4. HD Quality Print: Enable HD printing in the ‘Fun Print’ app for sharper and clearer prints.
   Go to ‘Preview’ in the app and select ‘HD’ Print Mode.
5. After successful connection, you can start using the printer.

പ്രിൻ്റിംഗ് പേപ്പർ എങ്ങനെ മാറ്റിസ്ഥാപിക്കാം
നുറുങ്ങുകൾ: Please fully charge the printer for the first time, then unplug the charger before use!

1. പ്രിന്റ് പോഡിന്റെ കവർ തുറക്കുക, പഴയ പ്രിന്റർ പേപ്പർ നീക്കം ചെയ്യുക.
2. Confirming the direction of paper roll placement
   (കുറിപ്പ്: The paper should extend 2.5 cm outside the bin to allow the machine to automatically feed it when the bin box is closed).
3. Place the printer cover back on to ensure the printer will print properly.

ട്രബിൾഷൂട്ടിംഗും പതിവുചോദ്യങ്ങളും

Why You Should Choose Ago Deo Mini Printer?

Our 300 DPI Mini Printer offers superior print clarity, durability, and ease of use compared to standard thermal printers. Here’s why Ago Deo stands out:
Superior Print Quality

The AgoDeo Mini Printer features an upgraded 300DPI resolution, delivering crisper text, smoother graphics, and high-definition, sharp details prints with no visible dots.

Standard 200 DPI models often produce lower-quality prints, making small text hard to read and images appear pixelated, rough edge or even blurry .

പ്രമാണങ്ങൾ / വിഭവങ്ങൾ

agodeo Mini Thermal Printer [pdf] ഉപയോക്തൃ മാനുവൽ Mini Thermal Printer, Thermal Printer, Printer

റഫറൻസുകൾ

• ഉപയോക്തൃ മാനുവൽ