Canon Speedlite 200E Flash Instruction Manual

ആമുഖം

The Canon Speedlite 200E is a compact and economical clip-on TTL automatic flash unit designed for use with Canon EOS cameras. This manual provides essential information for the proper setup, operation, and maintenance of your Speedlite 200E to ensure optimal performance.

Image: Canon Speedlite 200E Flash unit. This image displays the compact design of the flash unit, highlighting its shoe mount for attachment to a camera.

ഉൽപ്പന്ന സവിശേഷതകൾ

• Clip-on TTL Automatic Flash: Provides automatic through-the-lens flash exposure control.
• Compact and Economical Design: Designed for portability and cost-effectiveness.
• Canon EOS Camera Compatibility: Engineered to work with Canon EOS camera systems.
• ഗൈഡ് നമ്പർ: Features a guide number of 20 meters (65 feet) at ISO 100.
• ഫ്ലാഷ് കവറേജ്: Offers flash coverage suitable for focal lengths as wide as 35mm.

സജ്ജമാക്കുക

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

1. Locate the battery compartment cover on the Speedlite 200E.
2. Open the cover and insert four (4) AAA-size batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
3. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.

Note: Four AAA batteries are required for operation. The product listing indicates "4 AA batteries" as included components, which may be a discrepancy or for a different accessory. Please use AAA batteries for the flash unit.

2. Attaching to Camera

1. Ensure both the camera and the Speedlite 200E are powered off.
2. Slide the mounting foot of the Speedlite 200E into the hot shoe of your Canon EOS camera until it clicks into place.
3. If present, tighten the locking mechanism on the flash unit to secure it to the camera's hot shoe.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

അടിസ്ഥാന പ്രവർത്തനം

1. പവർ ഓൺ: Turn on your Canon EOS camera and then the Speedlite 200E.
2. ഓട്ടോമാറ്റിക് എക്സ്പോഷർ: The Speedlite 200E operates as a TTL (Through-The-Lens) automatic flash. It communicates with your Canon EOS camera to determine the appropriate flash output for correct exposure.
3. ഷൂട്ടിംഗ്: Frame your shot and press the camera's shutter button. The flash will fire automatically, providing illumination.

Guide Number and Coverage

• The guide number of 20 meters (65 feet) at ISO 100 indicates the flash's power output. This value can be used to calculate approximate flash-to-subject distance for manual exposure settings, though the 200E primarily functions in TTL mode.
• The flash provides coverage for lenses with focal lengths as wide as 35mm. For wider lenses, some vignetting or uneven illumination may occur.

മെയിൻ്റനൻസ്

വൃത്തിയാക്കൽ

• ഫ്ലാഷ് യൂണിറ്റിന്റെ പുറംഭാഗം തുടയ്ക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ ഒരു തുണി ഉപയോഗിക്കുക.
• കഠിനമായ അഴുക്കിന്, ചെറുതായി dampവെള്ളം അല്ലെങ്കിൽ നേരിയ ക്ലീനിംഗ് ലായനി ഉപയോഗിച്ച് തുണിയിൽ തുടയ്ക്കുക, എന്നിട്ട് ഉടൻ ഉണക്കുക.
• Do not use strong solvents or abrasive cleaners, as these can damage the finish or electronic components.
• Keep the flash contact points on the mounting foot clean and free of debris to ensure proper communication with the camera.

ബാറ്ററി കെയർ

• Remove batteries from the flash unit if it will not be used for an extended period to prevent leakage and potential damage.
• Replace all four batteries simultaneously with new ones. Do not mix old and new batteries or different types of batteries.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For information regarding warranty coverage, technical support, or service for your Canon Speedlite 200E, please refer to the warranty card included with your product or visit the official Canon support website. You can also contact Canon customer service directly for assistance.

ഔദ്യോഗിക കാനൺ Webസൈറ്റ്: https://www.usa.canon.com/support