ADTRAN MX2800 M13/STS-1 Multiplexer Redundant AC Power Supply User Manual

1. ആമുഖം

This manual provides essential instructions for the installation, operation, and maintenance of the ADTRAN MX2800 M13/STS-1 Multiplexer Redundant AC Power Supply (Model 1202289L1). Please read this manual thoroughly before attempting to install or operate the device to ensure proper function and safety.

2 സുരക്ഷാ വിവരങ്ങൾ

ഉപകരണങ്ങൾക്ക് പരിക്കേൽക്കുന്നതും കേടുപാടുകൾ സംഭവിക്കുന്നതും തടയാൻ ഇനിപ്പറയുന്ന സുരക്ഷാ മുൻകരുതലുകൾ പാലിക്കുക:

• വൈദ്യുതി വിച്ഛേദിക്കൽ: Always disconnect power to the MX2800 chassis before installing or removing the power supply unit.
• യോഗ്യതയുള്ള ഉദ്യോഗസ്ഥർ: ഇൻസ്റ്റാളേഷനും സർവീസിംഗും യോഗ്യതയുള്ള ഉദ്യോഗസ്ഥർ മാത്രമേ നടത്താവൂ.
• വെൻ്റിലേഷൻ: Ensure adequate ventilation around the power supply and the MX2800 chassis to prevent overheating.
• പരിസ്ഥിതി വ്യവസ്ഥകൾ: Operate the device within specified environmental limits (temperature, humidity).
• ഗ്രൗണ്ടിംഗ്: Ensure the MX2800 chassis is properly grounded.

3. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• ADTRAN MX2800 M13/STS-1 Multiplexer Redundant AC Power Supply (Model 1202289L1)
• Documentation (this manual or similar)
• Note: Power cords or mounting hardware may be sold separately or included with the main MX2800 unit.

4. ഉൽപ്പന്നം കഴിഞ്ഞുview

The ADTRAN MX2800 M13/STS-1 Multiplexer Redundant AC Power Supply is designed to provide reliable power to the ADTRAN MX2800 chassis. This 30-watt AC power supply offers redundancy, enhancing the overall system's uptime and reliability by providing a backup power source in case of a primary power supply failure. It is specifically engineered for seamless integration with the MX2800 M13/STS-1 Multiplexer system.

ചിത്രം: മുൻഭാഗം view of the ADTRAN MX2800 Redundant AC Power Supply. This image displays the physical unit, typically showing its connectors and form factor designed for integration into the MX2800 chassis.

5. സജ്ജീകരണം

Follow these steps to install the AC Power Supply into the MX2800 chassis:

1. പവർ ഓഫ്: Ensure the MX2800 chassis is completely powered off and disconnected from all power sources.
2. Locate Slot: Identify the designated power supply slot(s) in the MX2800 chassis. Refer to the MX2800 chassis manual for specific slot locations.
3. Insert Power Supply: Carefully slide the AC Power Supply into the vacant slot until it is fully seated. Ensure the connectors align properly.
4. സുരക്ഷിത യൂണിറ്റ്: Use any provided thumbscrews or locking mechanisms to secure the power supply in place within the chassis.
5. എസി പവർ ബന്ധിപ്പിക്കുക: Connect a suitable AC power cord (not included) to the power supply's AC inlet and then to a grounded electrical outlet.
6. പവർ ഓൺ: Reconnect power to the MX2800 chassis and power it on. Observe the power supply's indicator lights for proper operation.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once installed and powered on, the redundant AC power supply operates automatically. Key operational aspects include:

• പവർ സൂചകങ്ങൾ: Check the status indicator lights on the power supply. A solid green light typically indicates normal operation. Refer to the MX2800 chassis manual for specific indicator meanings.
• ആവർത്തനം: If two power supplies are installed, they operate in a redundant configuration. Should one unit fail, the other automatically takes over, ensuring continuous operation of the MX2800.
• ഹോട്ട്-സ്വാപ്പബിൾ: This power supply is designed to be hot-swappable, meaning it can be replaced without powering down the entire MX2800 chassis, provided another operational power supply is present. Always follow proper hot-swap procedures outlined in the MX2800 chassis manual.

7. പരിപാലനം

The ADTRAN MX2800 AC Power Supply requires minimal maintenance. Regular checks can help ensure its longevity and reliable performance:

• വിഷ്വൽ പരിശോധന: Periodically inspect the power supply and its connections for any signs of damage, loose cables, or excessive dust accumulation.
• വൃത്തിയാക്കൽ: If dust is present, gently clean the exterior of the power supply and the chassis ventilation openings using a soft, dry cloth or compressed air. Ensure the unit is powered off and disconnected before cleaning.
• ഫേംവെയർ: Power supplies typically do not have user-upgradable firmware. Any firmware updates would be part of the main MX2800 chassis system.

8. പ്രശ്‌നപരിഹാരം

If you encounter issues with your power supply, consider the following:

• പവർ ഇല്ല/ഇല്ല സൂചകങ്ങൾ:
  • Verify the AC power cord is securely connected to both the power supply and a working electrical outlet.
  • Check the circuit breaker or fuse for the electrical outlet.
  • Ensure the power supply is fully seated in its slot within the MX2800 chassis.
• ഫോൾട്ട് ഇൻഡിക്കേറ്റർ ലൈറ്റ്:
  • A fault indicator (often amber or red) suggests an internal issue or an environmental problem.
  • If redundant power supplies are installed, the system should continue operating on the healthy unit.
  • Attempt to reseat the power supply. If the fault persists, the unit may require replacement.
• സിസ്റ്റം അസ്ഥിരത:
  • If the MX2800 system experiences unexpected shutdowns or instability, and a power supply fault is indicated, replace the faulty power supply.
  • Ensure the power supply is compatible with your specific MX2800 chassis model.

For further assistance, contact ADTRAN technical support.

9 സ്പെസിഫിക്കേഷനുകൾ

10. വാറൻ്റിയും പിന്തുണയും

For information regarding the warranty coverage for your ADTRAN MX2800 M13/STS-1 Multiplexer Redundant AC Power Supply, please refer to the warranty documentation provided with your original MX2800 system or visit the official ADTRAN website. For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact ADTRAN customer service or your authorized ADTRAN reseller.

ADTRAN Contact Information:

• Please refer to the official ADTRAN webഏറ്റവും പുതിയ കോൺടാക്റ്റ് വിശദാംശങ്ങൾക്കായി സൈറ്റ്.