Sharpie 30001

Sharpie Permanent Markers User Manual

Model: 30001 | Brand: Sharpie

ആമുഖം

This manual provides essential information for the proper use and care of your Sharpie Permanent Markers. Designed for vibrant, bold, and lasting impressions, these fine-point markers are suitable for a wide range of surfaces including paper, plastic, and metal. They feature quick-drying, water-resistant, and fade-resistant ink, making them a reliable tool for various applications in offices, classrooms, and homes.

Pack of 12 black Sharpie Fine Tip Permanent Markers

Figure 1: Sharpie Fine Tip Permanent Markers, 12-count pack.

ഉൽപ്പന്ന സവിശേഷതകൾ

Close-up of Sharpie Fine Tip markers and a floral drawing

Figure 2: Fine tip for precise and detailed markings.

Sharpie marker writing 'PERMANENT' on various surfaces like metal, plastic, and wood

Figure 3: Permanent ink adheres to multiple surfaces.

Sharpie marker writing 'REMARKABLY RESILIENT' on a water-resistant surface

Figure 4: Water and fade resistant properties of Sharpie ink.

സജ്ജമാക്കുക

Sharpie Permanent Markers are ready for immediate use directly out of the packaging. No assembly or special preparation is required.

  1. Remove the marker from its packaging.
  2. Carefully remove the cap by pulling it straight off. Avoid twisting to prevent damage to the tip.
  3. The cap can be placed on the end of the marker barrel while in use to prevent loss and provide a balanced feel.
ഫ്രണ്ട് view of Sharpie Fine Tip Permanent Markers packaging

Figure 5: Markers are ready for use directly from the packaging.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Sharpie Permanent Markers are designed for ease of use across various applications.

പൊതുവായ ഉപയോഗം:

ശുപാർശ ചെയ്യുന്ന ഉപരിതലങ്ങൾ:

Hand writing 'Alex's Notebook KEEP OUT!!' on a white binder with a Sharpie marker

Figure 6: Using a Sharpie marker on a notebook.

Hand writing 'TMR 032869' on a grey storage bin with a Sharpie marker

Figure 7: Labeling a storage container with a Sharpie marker.

പരിപാലനവും പരിചരണവും

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Marker not writing or ink is faint.Cap left off, ink dried out, or low ink level.Ensure cap is always replaced. Try gently pressing the tip on a scrap piece of paper to re-prime. If still faint, the marker may be empty and needs replacement.
Ink smudges after writing.Not enough drying time, especially on non-porous surfaces.Allow more time for the ink to dry completely before touching the marked surface. Drying time varies by surface.
Tip appears frayed or damaged.Excessive pressure during use or improper storage.Use lighter pressure when writing. Ensure markers are stored horizontally. A damaged tip cannot be repaired, and the marker should be replaced for optimal performance.

സ്പെസിഫിക്കേഷനുകൾ

ആട്രിബ്യൂട്ട്വിശദാംശങ്ങൾ
ബ്രാൻഡ്ഷാർപ്പി
മോഡൽ നമ്പർ30001
ഇനത്തിൻ്റെ ഭാരം3.2 ounces (for 12-count pack)
Product Dimensions (per marker)Approximately 5.6 inches (14 cm) in length
നിറംകറുപ്പ്
മെറ്റീരിയൽ തരംAluminum (barrel)
ഇനങ്ങളുടെ എണ്ണം12 എണ്ണം (1 പായ്ക്ക്)
പോയിൻ്റ് തരംനന്നായി
മഷി നിറംകറുപ്പ്
Hand holding a Sharpie marker with a ruler showing 5.6 inches or 14 cm length

Figure 8: Approximate dimensions of a single Sharpie marker.

സുരക്ഷാ വിവരങ്ങൾ

Sharpie Permanent Markers contain alcohol-based ink. Please observe the following safety guidelines:

വാറൻ്റിയും പിന്തുണയും

Specific warranty information for Sharpie Permanent Markers is not provided in this manual. For details regarding product warranty, returns, or customer support, please refer to the official Sharpie webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുക.

You can visit the official Sharpie Store for more information: Sharpie Official Store

അനുബന്ധ രേഖകൾ - 30001

പ്രീview Thermo Fisher iCAP 6000 Series Pre-Installation Manual
Comprehensive guide for the pre-installation of the Thermo Fisher Scientific iCAP 6000 Series ICP-OES Spectrometer, covering site requirements, transportation, system accessories, and checklists.
പ്രീview FiTech Go EFI System Instruction Manual for 30001-30064
Comprehensive instruction manual for FiTech Go EFI Systems (models 30001, 30002, 30004, 30012, 30061, 30062, 30064), covering installation, setup, fuel delivery, wiring, and troubleshooting. Includes details on the Handheld Controller and optional fuel delivery kits.
പ്രീview വോൾക്കാനോ മിനി ബസൂക്ക സീരീസ് ബ്ലൂടൂത്ത് സ്പീക്കർ VK-30001-S11 ഇൻസ്ട്രക്ഷൻ മാനുവൽ
വോൾക്കാനോ മിനി ബസൂക്ക സീരീസ് ബ്ലൂടൂത്ത് സ്പീക്കറിനായുള്ള (VK-30001-S11) സമഗ്രമായ നിർദ്ദേശ മാനുവൽ. ബ്ലൂടൂത്ത്, യുഎസ്ബി, എഫ്എം റേഡിയോ എന്നിവ എങ്ങനെ ഉപയോഗിക്കാമെന്നും ഉപകരണം ചാർജ് ചെയ്യാമെന്നും പരിചരണ, സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ പാലിക്കാമെന്നും അറിയുക.
പ്രീview സ്ട്രാറ്റസിസ് ഒറിജിൻ വൺ യൂസർ ഗൈഡ് - 3D പ്രിന്റിംഗ് സിസ്റ്റത്തിലേക്കുള്ള സമഗ്ര ഗൈഡ്
ഈ സമഗ്രമായ ഉപയോക്തൃ ഗൈഡ് ഉപയോഗിച്ച് സ്ട്രാറ്റസിസ് ഒറിജിൻ വൺ 3D പ്രിന്റിംഗ് സിസ്റ്റം പര്യവേക്ഷണം ചെയ്യുക. നിങ്ങളുടെ ഒറിജിൻ വൺ പ്രിന്ററിന്റെ സജ്ജീകരണം, പ്രവർത്തനം, പരിപാലനം, ട്രബിൾഷൂട്ടിംഗ്, സുരക്ഷ എന്നിവയെക്കുറിച്ച് അറിയുക.
പ്രീview ബോബ്‌കാറ്റ് 753 ജി-സീരീസ് പാർട്‌സ് മാനുവൽ
ബോബ്‌കാറ്റ് 753 ജി-സീരീസ് സ്‌കിഡ് സ്റ്റിയർ ലോഡറിനായുള്ള സമഗ്രമായ പാർട്‌സ് മാനുവൽ, അറ്റകുറ്റപ്പണികൾക്കും അറ്റകുറ്റപ്പണികൾക്കുമുള്ള ഘടകങ്ങൾ, പാർട്ട് നമ്പറുകൾ, സീരിയൽ നമ്പർ വിവരങ്ങൾ എന്നിവ വിശദമായി പ്രതിപാദിക്കുന്നു. ഒന്നിലധികം ഭാഷകളിലുള്ള വിഭാഗങ്ങൾ ഉൾപ്പെടുന്നു.
പ്രീview Edge Juice & Attitude: 1998.5-2002 Dodge Cummins 5.9L 24V Installation Manual
This comprehensive manual from Edge Products details the installation and operation of the Juice and Attitude performance modules for 1998.5-2002 Dodge Cummins 5.9L 24 Valve engines, offering enhanced performance and vital monitoring capabilities.