ആമുഖം
This manual provides instructions for the proper setup, operation, and maintenance of the Nikon FH-835M 35mm Mounted Slide Holder. This accessory is designed to facilitate scanning of 35mm mounted slides using compatible Nikon Super Coolscan 8000 and 9000 ED scanners.
പാക്കേജ് ഉള്ളടക്കം
പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- Nikon FH-835M 35mm Mounted Slide Holder
സജ്ജമാക്കുക
Follow these steps to prepare the FH-835M slide holder for use with your scanner.
- അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the FH-835M slide holder from its packaging. Inspect for any signs of damage.
- അനുയോജ്യത പരിശോധന: Ensure your scanner is a Nikon Super Coolscan 8000 ED or 9000 ED model. The FH-835M is specifically designed for these scanners.
- Inserting Slides:
The FH-835M holds up to five 35mm mounted slides.
Each slide must be between 1.0 mm and 3.2 mm thick, and 49.0 mm to 50.8 mm wide.
Gently open the slide holder mechanism. Insert each mounted slide into its designated slot, ensuring it is seated correctly and securely. Pay attention to the orientation of the slide (emulsion side, image orientation) as required by your scanner's software.
Image: The Nikon FH-835M slide holder, showing the five slots for 35mm mounted slides.
- Loading into Scanner: Refer to your Nikon Super Coolscan 8000 ED or 9000 ED scanner's manual for specific instructions on how to load the FH-835M slide holder into the scanner's film tray or slot. Ensure it clicks into place securely.
പ്രവർത്തിക്കുന്നു
Once the FH-835M is loaded with slides and inserted into the scanner, you can begin the scanning process using your scanner's software.
- സോഫ്റ്റ്വെയർ ലോഞ്ച്: Launch the Nikon Scan software (or compatible scanning software) on your computer.
- Select Holder Type: Within the software, select the appropriate film holder type, typically "FH-835M" or "Mounted 35mm Slides."
- പ്രീview ക്രമീകരിക്കുക: സോഫ്റ്റ്വെയറിന്റെ പ്രീ-ഉപയോഗിക്കുകview function to check the loaded slides. Make any necessary adjustments to cropping, exposure, color, and other settings.
- സ്കാനിംഗ്: Initiate the scan. The scanner will automatically advance through the slides in the holder.
- അൺലോഡ് ചെയ്യുന്നു: After scanning is complete, carefully remove the FH-835M from the scanner. Open the holder and remove the slides.
മെയിൻ്റനൻസ്
Proper care ensures the longevity and optimal performance of your FH-835M slide holder.
- വൃത്തിയാക്കൽ: Use a soft, lint-free cloth to gently wipe the surfaces of the holder. Avoid abrasive cleaners or solvents. Ensure no dust or debris accumulates in the slide slots, as this can affect scan quality.
- സംഭരണം: Store the slide holder in a clean, dry, dust-free environment when not in use.
- കൈകാര്യം ചെയ്യൽ: Always handle the holder by its edges to avoid touching the slide-holding areas or introducing fingerprints.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues while using the FH-835M, consider the following:
- Slides Not Loading Correctly:
Ensure slides meet the thickness (1.0-3.2 mm) and width (49.0-50.8 mm) requirements.
Check for bent or damaged slide mounts.
Verify slides are inserted fully and correctly into each slot.
- Scanner Not Recognizing Holder:
Ensure the FH-835M is fully and correctly inserted into the scanner's film tray slot.
Restart the scanning software and/or the scanner.
Confirm your scanner model is compatible (Super Coolscan 8000 ED or 9000 ED).
- മോശം സ്കാൻ നിലവാരം:
Clean the slide holder and the scanner's film path for dust or debris.
Ensure slides are clean and free of dust.
Check scanner software settings for proper focus and exposure.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ | Nikon FH-835M |
| ഉൽപ്പന്ന തരം | 35mm Mounted Slide Holder |
| അനുയോജ്യത | Nikon Super Coolscan 8000 ED, Nikon Super Coolscan 9000 ED |
| ശേഷി | Up to 5 mounted slides |
| Supported Slide Thickness | 1.0 മില്ലിമീറ്റർ മുതൽ 3.2 മില്ലിമീറ്റർ വരെ |
| Supported Slide Width | 49.0 മില്ലിമീറ്റർ മുതൽ 50.8 മില്ലിമീറ്റർ വരെ |
| ഇനത്തിൻ്റെ ഭാരം | 8.8 ഔൺസ് (ഏകദേശം 250 ഗ്രാം) |
| യു.പി.സി | 018208092420 |
വാറൻ്റി വിവരങ്ങൾ
The Nikon FH-835M 35mm Mounted Slide Holder comes with a 1-year limited warranty. For detailed terms and conditions, please refer to the warranty card included with your original purchase or visit the official Nikon website. This warranty covers manufacturing defects under normal use.
പിന്തുണ
For further assistance, technical support, or service inquiries, please contact Nikon customer support.
- Nikon Official Webസൈറ്റ്: സന്ദർശിക്കുക www.nikonusa.com ഉൽപ്പന്ന വിവരങ്ങൾ, പതിവുചോദ്യങ്ങൾ, പിന്തുണാ ഉറവിടങ്ങൾ എന്നിവയ്ക്കായി.
- കസ്റ്റമർ സർവീസ്: Refer to your region-specific Nikon webകോൺടാക്റ്റ് നമ്പറുകൾക്കും സർവീസ് സെന്റർ ലൊക്കേഷനുകൾക്കുമുള്ള സൈറ്റ്.
