ഉൽപ്പന്നം കഴിഞ്ഞുview
The EHEIM Classic 2215 External Canister Filter is a legendary filter known for its tried and tested technology and high level of efficiency, suitable even for larger aquarium systems. It achieves mechanical-biological purification in a single process, ensuring constant water circulation and simultaneous oxygen enrichment. This model is designed for aquariums up to 92 US Gallons.
സജ്ജീകരണ നിർദ്ദേശങ്ങൾ
Follow these steps for proper setup of your EHEIM Classic 2215 filter:
- ഫിൽറ്റർ മീഡിയ തയ്യാറാക്കുക:
- If using filter pads: Rinse all filter pads thoroughly under running water. Insert them into the filter canister as follows: 6 coarse blue filter pads at the bottom, 1 fine white filter pad, and 1 black carbon filter pad as the top layer. The carbon filter pad helps adsorb harmful substances initially and should be removed after approximately two weeks of operation.
- If using filter media: Rinse all filter media under running water. Insert them into the filter canister in the following order from bottom to top: Eheim Mech, Coarse blue filter pad, Eheim Substrat Pro or Substrat, Fine white filter pad, and 1 black carbon filter pad as the top layer. The carbon filter pad should be removed after approximately two weeks.
- Assemble Pump Head: Put on the pump head, ensuring the O-ring is correctly fitted. Close all clips securely.
- ഫിൽട്ടർ സ്ഥാപിക്കുക: Place the filter underneath the aquarium. It is crucial that the filter unit is positioned below the water level of the aquarium for proper operation.
- Install Pipes and Hoses:
- Fit the outlet pipe as per the provided drawing (refer to your physical manual for drawing 1 or 2).
- Assemble the suction pipe and strainer. Attach them to the side of the aquarium using the two suction cups.
- Connect the hoses to the filter: The suction side hose connects to the bottom intake nozzle, and the pressure side hose connects to the pump head.
- Secure all hoses firmly with the clampഅണ്ടിപ്പരിപ്പ്.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
To put your EHEIM Classic 2215 filter into operation, you need to prime it. There are three common methods:
- Using a Starter Bulb: If your setup includes a starter bulb, follow its specific instructions to prime the filter.
- Using the Universal Installation Kit: If you have a universal installation kit, utilize its priming mechanism.
- Manual Priming: By gently sucking on the hose connected to the pressure side (outlet). Connect the pressure side hose to the outlet elbow and the spray bar. As the filter fills with water, the pump can be switched on. A slight noise may be heard initially as trapped air is exhausted from the filter media. Once all bubbles have disappeared, fit the plug into the end of the spray bar.
Ensure the filter is completely filled with water before switching on the pump to prevent damage.
പരിപാലനവും സേവനവും
Regular maintenance ensures optimal performance and longevity of your filter. When cleaning or changing filter media, and the filter needs to be disconnected from the aquarium, observe the following critical points:
- പവർ വിച്ഛേദിക്കുക: Always pull out the mains plug before performing any maintenance.
- വേർപെടുത്തുക: Release the locking piece on the pump head and carefully remove pump parts as per the drawing in your physical manual. Use a screwdriver to remove the cooling channel insert.
- വൃത്തിയാക്കൽ: എല്ലാ ഭാഗങ്ങളും നന്നായി വൃത്തിയാക്കുക.
- പുനഃസംയോജനം: Reassemble all components in the reverse order of disassembly.
- Reconnecting to Aquarium:
- The filter must be empty of water when reconnecting to the aquarium.
- The pressure hose to the spray bar must be drained of water, and its tap left open.
- After all connections are securely made, the tap on the suction side can be opened. Water will then flow into the filter, expelling all air out of the spray bar, which eliminates airlock and ensures perfect priming.
- ഹോസ് കണക്ഷനുകൾ: All hose connections must be checked at regular intervals for correct fitting and to prevent leaks.
- Impeller Check: Ensure the impeller blades rotate freely on the impeller, and the impeller itself spins freely on the ceramic shaft. This is essential for the pump to start without trouble.
ട്രബിൾഷൂട്ടിംഗ്
While specific troubleshooting steps are not detailed in the provided information, many common issues can be resolved by reviewing the setup and maintenance sections. Ensure all connections are secure, hoses are not kinked, and the filter is properly primed. If the pump does not start, verify the impeller is clean and rotates freely.
ഉൽപ്പന്ന സവിശേഷതകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | എഹൈം |
| മോഡലിൻ്റെ പേര് | Eheim Classic Canister Filter 2215 |
| ഇനം മോഡൽ നമ്പർ | 2215371 |
| ASIN | B0002AQXV8 |
| വലിപ്പം | 92 യുഎസ് ഗാൽ |
| നിറം | കറുപ്പ് |
| ബാഹ്യ മെറ്റീരിയൽ | പ്ലാസ്റ്റിക് |
| ഇനത്തിൻ്റെ ഭാരം | 6.07 പൗണ്ട് |
| ഉൽപ്പന്ന അളവുകൾ (LxWxH) | 11 x 7.28 x 14.57 ഇഞ്ച് |
| നിർമ്മാതാവ് | EHEIM - Import FOB China |
| യു.പി.സി | 781163871095, 720686222113, 720686224711, 720686222106, 720686224704 |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | Eheim Classic Canister Filter 2215 (with filter media, spray bar, inlet pipe, hose, installation accessories) |
| ടാർഗെറ്റ് ഓഡിയൻസ് കീവേഡ് | algae-eaters, arachnids, arthropods, bats-animals, bearded-dragons, bees, beetles, betta-fish, bottom-feeder-fish, butterflies, cichlid-fish, crabs, dragonflies, fish, frogs, geckos, goldfish, hermit-crabs, iguanas, insects, invertebrate-fish, ladybugs, lizards, mollusks, newts, octopuses, rays, reptiles, salamanders, sharks, snails, snakes, spiders, tortoises, turtles |
വാറൻ്റി വിവരങ്ങൾ
The EHEIM Classic 2215 External Canister Filter comes with a 2 വർഷത്തെ വാറൻ്റി നിർമ്മാതാവിൽ നിന്ന്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.
അധിക പിന്തുണ
For more detailed instructions, diagrams, and comprehensive support, please refer to the official user manual:
