Tamiya Ferrari F310B 1/20 Scale Plastic Model Kit Instruction Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

This document provides instructions for the assembly and care of the Tamiya Ferrari F310B 1/20 Scale Plastic Model Kit. The Ferrari F310B is a highly detailed replica of the 1997 Formula One racing machine. This kit requires assembly, painting, and decal application.

The F310B features a renewed monocoque construction and an aerodynamic package redesigned for stability. It retains the transversely mounted gearbox and rear suspension from the F310. The V-10 cylinder 2,998.1cm³ powerplant, designated 046/2, is an evolution of the previous year's engine, offering improved driveability and performance. Independent push-rod activated torsion springs are used for the front and rear suspension to optimize handling.

2. അസംബ്ലിക്ക് മുമ്പ്

2.1 ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ

• Plastic model kit parts for assembly
• ഡെക്കലുകൾ
• ഇൻസ്ട്രക്ഷൻ മാനുവൽ (ഈ പ്രമാണം)

2.2 Required Tools and Materials (Not Included)

The following tools and materials are recommended for assembly:

Figure 1: Recommended Tools and Cements

• Angled Tweezers (Art. Nr. 300074003)
• Cutter Knife (Art. Nr. 300074013)
• Decal Scissors (Art. Nr. 300074031)
• Side Cutters for Plastic (Art. Nr. 300074035)
• Paint Brush Set "Basic" (Art. Nr. 30007066)
• Masking Tape 10mm with Dispenser (Art. Nr. 300070831)
• Plastic Cement 40ml Tamiya (Art. Nr. 300087003)
• Plastic Cement 40ml extra thin Tamiya (Art. Nr. 300087038)
• Mark Fit (Strong) Decal Softener Tamiya (Art. Nr. 300087135)
• Decal Adhesive Soft / Haftmittel 10ml (Art. Nr. 300087193)

Figure 2: Required Paints

XF-Acrylic Flat Paints (23ml)

• XF-1 Black (Art. Nr. 300081301)
• XF-4 Yellow-Green (Art. Nr. 300081304)
• XF-7 Red (Art. Nr. 300081307)
• XF-10 Brown (Art. Nr. 300081310)
• XF-16 Aluminum (Art. Nr. 300081316)
• XF-52 Earth (Art. Nr. 300081352)
• XF-56 Metallic Gray (Art. Nr. 300081356)

X-Acrylic Gloss Paints (23ml)

• X-2 White (Art. Nr. 300081002)
• X-4 Blue (Art. Nr. 300081004)
• X-5 Green (Art. Nr. 300081005)
• X-7 Red (Art. Nr. 300081007)
• X-8 Lemon Yellow (Art. Nr. 300081008)
• X-10 Gun Metal (Art. Nr. 300081010)
• X-11 Chrome Silver (Art. Nr. 300081011)
• X-12 Leaf Green (Art. Nr. 300081012)
• X-18 Semi Gloss Black (Art. Nr. 300081018)
• X-27 Clear Red (Art. Nr. 300081027)
• X-20A Thinner 23ml Acryl (Art. Nr. 300081020)

3. അസംബ്ലി നിർദ്ദേശങ്ങൾ

Follow the detailed step-by-step diagrams provided in the physical instruction booklet included with your kit. The general assembly process involves:

1. Part Preparation: Carefully remove parts from the sprues using a cutter knife or side cutters. Smooth any rough edges with a hobby file അല്ലെങ്കിൽ സാൻഡ്പേപ്പർ.
2. Sub-Assembly: Assemble smaller components such as the engine, cockpit, and suspension according to the diagrams. Use plastic cement sparingly to avoid damaging the plastic.
3. പെയിൻ്റിംഗ്: Apply paints as indicated in the instruction booklet. Refer to the paint list in Section 2.2 for recommended colors. Allow each coat to dry completely before applying the next.
4. Main Assembly: Attach sub-assemblies to the main chassis and body. Ensure proper alignment before applying cement.
5. ഡെക്കൽ അപേക്ഷ: Cut out decals carefully. Dip them in water for a few seconds until they can slide off the backing paper. Position them on the model and gently press out any air bubbles or excess water. Use decal softener (e.g., Mark Fit Strong) for irregular surfaces.
6. അന്തിമ വിശദാംശങ്ങൾ: Add any remaining small parts, mirrors, or clear parts.

കുറിപ്പ്: Pay close attention to the orientation of parts, especially during suspension and wheel assembly, to ensure correct alignment.

4. പരിപാലനവും പരിചരണവും

To preserve the appearance of your assembled model, follow these guidelines:

• വൃത്തിയാക്കൽ: Dust the model regularly with a soft, dry brush or a microfiber cloth. Avoid using harsh chemicals or abrasive cleaners.
• ഡിസ്പ്ലേ: Display the model in a cool, dry place away from direct sunlight to prevent fading of paints and decals.
• കൈകാര്യം ചെയ്യൽ: Handle the model carefully, avoiding pressure on delicate parts.

5. പ്രശ്‌നപരിഹാരം

5.1 Decal Application Issues

If decals are difficult to apply or do not adhere properly:

• Ensure the surface is clean and smooth. A gloss coat can help decals adhere better.
• Use a decal softener (e.g., Tamiya Mark Fit Strong) to help decals conform to irregular surfaces and prevent silvering.
• For older decals, a longer soaking time in water might be necessary, but exercise caution as they can become brittle.
• For tire decals, some Tamiya kits require a specific application method where the decal is transferred by rubbing the back of the paper after wetting. Refer to the specific instructions in your kit for tire decals.

5.2 Parts Not Fitting

If parts do not fit together smoothly:

• Check for excess plastic (flash) on the edges of the parts and carefully trim it away.
• Ensure paint layers are not too thick in connection points, as this can affect fit. Thin coats are recommended.
• Verify that you are using the correct parts and orientation as indicated in the instruction diagrams.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

For questions regarding missing parts, manufacturing defects, or assembly assistance, please contact Tamiya customer support directly. Refer to the contact information provided on the product packaging or the official Tamiya webസൈറ്റ്.

As this is a model kit requiring assembly, specific warranties typically cover manufacturing defects of the parts themselves, not issues arising from assembly errors or improper use of tools/materials.